K&K Sound Pure Classic Manual

K&K Sound Ikke kategoriseret Pure Classic

Læs gratis den danske manual til K&K Sound Pure Classic (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 85 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 43 anmeldelser. Har du et spørgsmål om K&K Sound Pure Classic, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

PU R E C LA S S IC

Thank you for buying the Pure Classic Transducer

System for your guitar! The Pure Classic is a four-

head piezo-ceramic transducer with endpin jack.

Please read through the complete instructions

before beginning installation. This manual is written

in great detail to help you install the Pure Classic for

best possible performance. Please also familiarize

yourself with the handling instructions of superglue

(if used) and the supplied double-sided tape and with

the disclaimer at the end of this manual.

TABLE OF CONTENTS

1. Tools Needed

2. Package Contents

3. Removable vs. Permanent Installation

4. Installation Preparation

5. Installation for Guitars without Bridge

Reinforcement Strip

6. Installation for Guitars with Bridge Reinforcement

Strip

7. Drilling the Endpin Jack Hole

8. Installing the Endpin Jack

9. Removing the Pickups

1. TOOLS & SUPPLIES NEEDED

• Superglue gel (any brand of Cyanacrylate glue

will do as long as it is gel)

• Electric drill (for drilling endpin jack hole and

pickup reference hole)

• Proper drill bits for endpin jack mount and a very

small bit for the reference holes

• Pliers or wrench for endpin jack installation

• 4 latex gloves (if superglue is used, alternatively

use the supplied finger cots)

• Razorblade

2. PACKAGE CONTENTS

• Pure Class head transducer with cable ic 4-

harness and endpin jack

• Double-sided tape for removable installation

3. REMOVABLE VS. PERMANENT INSTALLATION

The pickups can be installed either with a permanent

installation (super-gluing them directly to the wood

inside your guitar) or with a removable installation

(using the supplied double-sided adhesive tape). But

there is a difference in tone quality.

Our recommendation is to install Pure pickups with

super glue. It will put out about 30% more volume,

more bass and more punch. It is a big part of the

sound that made these pickups so successful! The

overall tone quality using the superglue installation

is probably best described as providing

“authoritative tone” with very fundamental bass

response. Even a single tone will sound warm, full

and woody.

On the other hand, an installation using the double-

sided adhesive tape provides a somewhat finer tone,

which may be desirable for some players. Plus it

makes the system removable. It sounds slightly

brighter with less authority and less bass response.

The output will still be sufficient and higher than

most competitors’ passive pickups. Volume and bass

can easily be boosted with one of our preamps, if

desired. The pickups are virtually noiseless; pre-

amplification usually does not introduce noticeable

noise.

If you opt for the removable installation, please

follow the handling instructions that are supplied

with the double- sided adhesive tape.

If you are new to the Pure pickups, we recommend

using the removable installation at first. You may

like it just fine this way. If you would like to get a

more authoritative, fundamental and louder tone

later on, you can carefully remove, clean and re-

install the pickups with superglue.

4. INSTALLATION PREPARATION

You are going to install the pickups according to the

pictures in this manual.

• Place the guitar on a table. Use a blanket to

prevent damage to the instrument body.

• Remove the strings.

• Place the guitar so you can comfortably put your

hand into the sound hole and feel the inside

structures underneath the bridge with your

fingers.

• Locate the bracing and check if your guitar has a

bridge reinforcement strip. Some do, some don’t.

It is a thin wood plate usually about 3/4" or less

(about 15-20mm) wide and about as long as the

bridge. It is located underneath the bridge. You

can feel it with your fingers.

• Please follow the appropriate paragraph below

for the installation (with- or without bridge

reinforcement strip)

If superusing glue: Find out which hand you are

going to use for the installation and put on a latex

glove or one of the included finger cots.

Use some of the supplied double-sided adhesive

tape and stick a small piece to the tip of your index

or middle finger (whichever you use, see photo) and

stick the pickup to it. The golden side of the pickup is

facing up. This makes holding onto the pickup and

aiming a lot easier as you do not have to deal with

holding the cable.

IMPORTANT! The entire golden surface of the

pickups should be covered with glue! Spread a THIN

layer all over the golden side. Do not use just a drop

in the center, as this will not distribute evenly.

Please do not worry or hurry; the glue will not dry

immediately after it is applied to the pickup. You will

have sufficient time without rushing things. The

superglue gel even allows for a very short

repositioning time after the pickup is in contact with

the wood. Excess glue will ooze out at the edges and

eventually dry - that’s fine. Hold and press the pickup

firmly in place for about 30 seconds at its final

location.

The four pickup heads are identical, they are all full

range transducers. It does not matter in which

position you install any of the pickups.

Produkt Specifikationer

Mærke:	K&K Sound
Kategori:	Ikke kategoriseret
Model:	Pure Classic

Har du brug for hjælp?

Hvis du har brug for hjælp til K&K Sound Pure Classic stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret K&K Sound Manualer

K&K Sound Trinity Pro Preamp Manual

30 August 2024

K&K Sound Mandolin Twin Fusion Manual

30 August 2024

K&K Sound Definity System Manual

30 August 2024

K&K Sound Big Twin Manual

30 August 2024

K&K Sound Bass Master Rockabilly Plus Manual

30 August 2024

K&K Sound Pure Mini Manual

30 August 2024

K&K Sound Pure Preamp Manual

30 August 2024

K&K Sound Dual-Channel Pro Preamp Manual

30 August 2024

K&K Sound Twin Spot Internal Manual

30 August 2024

K&K Sound Volume Control Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Metronic 451043 Manual

13 August 2025

Amaran Light Dome 60 Manual

13 August 2025

Sauermann CO 110 Manual

13 August 2025

Moulinex Virtuo IM1739 Manual

13 August 2025

Tefal Express Compact GV7315 Manual

13 August 2025

Cata X-MART 12 TIMER Manual

13 August 2025

Sauermann pH Safe 2 Manual

13 August 2025

Panduit WGCB24 Manual

13 August 2025

LD Systems U305 IEM Manual

13 August 2025

Watson VM-160-SE Manual

13 August 2025