Kathrein UFO 83/CI Manual

Kathrein Ikke kategoriseret UFO 83/CI

Læs gratis den danske manual til Kathrein UFO 83/CI (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Kathrein UFO 83/CI, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
1 / 8
Head-end 8-way DVB-S(2)/-T(2)/-C – DVB-T (COFDM)
UFO 83/CI 20610136
About This Manual
This document is part of the product.
►Install and use the unit only after you have read and
understood this document.
►Keep this document for reference throughout the life of
the device. Pass this document on to the next owner
and user of the device.
For the current version of this manual, go to the Kathrein
website www.kathrein-ds.com.
Features
■Stand-alone head-end with 8-way multi-standard
frontend DVB-S(2)/-T(2)/-C, 6-way decoding (CI)
and 8output channels conforming to DVB-T (exibly
congurable)
■Outstanding output values due to direct implementa-
tion as FPGA solution
■High level of energy efciency
■4 Sat-IF inputs with DiSEqCTM
1.0 functionality for sat
multi-switches and 1terr./cable input, exibly distribut-
able across 8 multi-standard frontends
■Power supply for LNB and active antennas
■All transmission parameters can be set using the
USW800 conguration software
■Remote maintenance and conguration
■Comprehensive baseband signal processing with
channel lter functionality such as NIT, LCN
■Cascade capability for two head-ends (16-way multi-
standard frontend and 16xDVB-T) for common
conguration and NIT generation incl. LCN
■No fan, therefore no noise and no maintenance
Scope of supply
●UFO 83/CI
●Wall mounting plate
●User instructions
●Third Party Software Acknowledgement
Function blocks
8 x DVB-
S2/-T2/-C
4 x Sat-IF/
1 x terr./cable
DiSEqC™
Channel
filter 8 x DVB-T
Input Frontend Baseband Output
Special features
Energy-
efficient
Thermal
cut-out
Matrix
5 to 8
Power supply LNB
and
current antennas
3 Watt/COFDM
(typical) 1)
NIT
generation
CAT
matching
CAM
software info
Advanced
CAM
6 x Common
Interface
CAM info
CAM routing
Default service
configuration
Flexible
decoding
CAM
TS analysis
CAM
software
Update
Decoding
monitoring
CAM
Power On/Off
CAM
Multitype
Extended
LCN
processing
1) typical for the following input: 4x DVB-S, 2x DVB-S2, 2x DVB-T2, no LNB/antenna supply, without CAM
IMPORTANT
Read carefully
before use!
2 / 8
Intended Use
The UFO83/CI is used for transmodulation and decoding of DVB signals. The latest triple-tuner technology makes it
possible to receive up to eight DVB-S(2)/ -T(2)/ -C transponders. These can be received from the four SAT-IP inputs with
DiSEqC functionality and the terrestrial/cable input in any combination. The UFO83/CI delivers up to eight individually
congurable output channels conforming to DVB-T.
The highly efcient baseband signal processing offers channel lter, NIT, CAT and LCN functionality. In addition, there are
six CI slots and exibly combinable, highly energy efcient decoding options available.
The conguration is carried out by means of the USW800 management software over an IP interface. An optional
cascading of two units (UFO83 or/and UFO83/CI) is possible via a USB connection.
The unit is intended exclusively for the application in the UFG810 as well as in satellite, cable or antenna reception
systems. Any other use of failure to comply with these instructions will result in voiding of the guarantee or warranty.
General safety instructions
●The device can be connected to the power supply and disconnected from it only by means of the power plug. Make
sure that the connected power plug is always freely accessible and easy to reach.
●If the casing is damaged, do not connect the device to the power supply.
●If the device and/or the cables connected to it are damaged, immediately disconnect the system from the power
supply. Do not switch the system on again until
–the device has been repaired by the dealer or manufacturer,
–and the cables connected have been repaired by a competent person.
●Do not open the casing and do not modify the device. Otherwise the guarantee and warranty will become void.
Exception: Cover of the CI slots ( in Fig. 1,P.3)⑭
●Never cover the cooling ribs or the air circulation openings.
●Do not modify, remove or disgure the notices and markings applied by the manufacturer.
●Refer to the manufacturer's documentation before connecting external components other than those described
in this document (such as computers, network components). Incorrectly connected components can damage the
device.
●Refer to the current issue of the safety requirements EN60728-11 and EN60065.
●Disconnect the device from the power supply before performing mechanical work on the system.
WARNING
Risk of burns from hot surfaces!
In the event of a defect the heat sink of the unit may exceed 70°C.
►Do not touch the heat sink when the device is in operation or has recently been in operation.
Note
In the event of overheating, the device will shut down automatically and after it has cooled down will switch
on again automatically.
Transportation and Storage
►Transport and storage the unit in its original packaging.
►Protect the unit against dust, dirt, moisture and direct sunlight.
►Transport and store the unit in the permissible temperature range from –25 to +70°C. Make sure there is no water
condensation bildup.

Produkt Specifikationer

Mærke: Kathrein
Kategori: Ikke kategoriseret
Model: UFO 83/CI

Har du brug for hjælp?

Hvis du har brug for hjælp til Kathrein UFO 83/CI stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Kathrein Manualer

Kathrein

Kathrein UFO 97-18 HDMI/CI Manual

17 Juli 2025
Kathrein

Kathrein UFO 102 Manual

17 Juli 2025
Kathrein

Kathrein ESO 005 Manual

10 Juni 2025
Kathrein

Kathrein UFX 150/4 Manual

16 Februar 2025
Kathrein

Kathrein UFX 12 Manual

5 Februar 2025
Kathrein

Kathrein UFX 14 Manual

5 Februar 2025
Kathrein

Kathrein UFO 97-18 HDMI Manual

28 Januar 2025
Kathrein

Kathrein FMK 100b Manual

15 Januar 2025
Kathrein

Kathrein CAP 500M plus Manual

15 Oktober 2024
Kathrein

Kathrein UFO 83 Manual

28 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Chief

Chief TILD1X05US-R Manual

14 Oktober 2025
GBC

GBC W12 Manual

14 Oktober 2025
Fuxtec

Fuxtec FX-CT100 Manual

13 Oktober 2025
Scotsman

Scotsman Prodigy Plus NH0422 Manual

13 Oktober 2025
Chief

Chief FCA800HS Manual

13 Oktober 2025
Chief

Chief OLCM1U Manual

13 Oktober 2025
IPEGA

IPEGA PG-P5V002 Manual

13 Oktober 2025
IPEGA

IPEGA PG-P5013 Manual

13 Oktober 2025
IPEGA

IPEGA PG-SW2210 Manual

13 Oktober 2025
IPEGA

IPEGA PG-P5042 Manual

13 Oktober 2025