Press the BREW OVER ICE button.
The BREW OVER ICE light will
remain illuminated while brewing.
Brewing is complete when all sizes
are illuminated. Lift the handle and
dispose of the K-Cup® pod.
Fill tumbler with ice and place on
the drip tray (for more height,
remove drip tray). Lift the handle
and place a K-Cup® pod in the
K-Cup® pod holder. Lower the
handle completely to close the lid.
1
2
Place Tumbler & Pod
Brew & Enjoy!
TO BREW OVER ICE
The 3 brew sizes will blink. Select and
press your brew size. The light will
remain illuminated while brewing.
Brewing is complete when the sizes
are all illuminated. Lift the handle
and dispose of the K-Cup® pod.
Place a mug on the drip tray.
Lift the handle and place a
K-Cup® pod in the K-Cup®
pod holder. Lower the handle
completely to close the lid.
1
2
Place Mug & Pod
Brew & Enjoy!
TO BREW HOT
Remove the water reservoir lid, then lift
the reservoir straight up to remove it. If
you have a Keurig® Water Filter, install it
now. Refer to your Water Filter Starter
Kit for instructions.
Rinse reservoir with fresh water and fill
to the MAX FILL line.
Replace water reservoir, making sure
the tank is seated properly in the base.
Replace lid.
NOTE: Do not use distilled water.
The 3 cup sizes will blink. Press the 8oz
button to start a cleansing brew. Pour
the hot water into the sink.
Do not remove the water reservoir or lift
the handle once the brew button has been
pressed until the brew has completed.
The one-time setup process is now
complete and you are ready to brew!
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do not lift the handle during the brewing process. Do not brew into glass.
NOTE: For best results, we recommend one-time use with our K-Cup® pods. A twice-brewed pod won’t provide full flavor, and if the pod holder isn’t lined up with the original
holes, it can cause an overflow of water and coffee grounds.
3 4
Lift & Lower Cleansing Brew
1 2
Plug & Place Rinse & Fill
Remove packing tape from
brewer. Plug into an outlet.
Place a large mug (10oz
minimum) on the drip tray.
Lift and lower the handle. Do not
insert a K-Cup® pod. The brewer
will power on automatically.
Brew Your First Cup
