Kidde P4010ACLEDS-2 Manual

Kidde Røgdetektor P4010ACLEDS-2

Læs gratis den danske manual til Kidde P4010ACLEDS-2 (8 sider) i kategorien Røgdetektor. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Kidde P4010ACLEDS-2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

INTELLIGENT SMOKE

Smoke Alarm User Guide

Hardwire Interconnect Photoelectric Smoke

with LED Strobe and Voice

Model P4010ACLEDS-2

120V HARDWIRE

INTERCONNEC T

10YEAR BATTERY BACKUP

VOICE ALARM

LED STROBE

AMBIENT LIGHT SENSOR

SMOKE ALARM

AMBIENT LIGHT SENSOR

Alarm samples the ambient light conditions of its location

and, if possible, determines a Night / Day cycle to delay chirps

during the night until the next Day cycle begins.

P/N: 1319-7201-00 Rev A

5. Introduction, Product Features and Specifications

Introduction

This alarm detects products of combustion using photoelectric technology .

Ten (10) years after the unit was installed, this unit will automatically alert you that it is time to replace the unit. This is

called “End of Unit Life” mode. See Troubleshooting Guide. To help identify the date to replace the unit, a label has been

affixed to the side of the alarm. Write the “Install date” in the space provided, and then write in the “Replace by” date

(10 years from initial power up) in permanent marker on the label prior to installing the unit. NOTE: AC power must be

connected to obtain the full 10 year battery and unit life.

Product Features and Specifications:

• Temperature: Operating Range: 40°F (4.4°C) to 100°F (37.8°C)

• Humidity: Operating range: up to 95% RH non-condensing

• Audible Alarm: 85+ dB at 10’ 3.0 to 3.5 KHz pulsing alarm, with voice message “Fire!”

NOTE: This is not a CO alarm, but it will receive and transmit a CO alarm signal (with voice message

“Warning! Carbon Monoxide”) from an interconnected CO or combination smoke/CO alarm.

• Smoke Sensor: Photoelectric

• Voice message system

• Smoke Alarm SMART Hush® Control

• Ambient Light Sensing

• LED Strobe

• Powered by 120VAC (60 Hz, 687 mA max) wire-in connector with sealed lithium battery backup.

• Hardwire interconnectable to other compatible alarms.

• One large, user- friendly button. (Strobe dome is the button).

• Applications: Primary Direct or Indirect and Supplementary

• Light Output: 177 Candela minimum (on axis measurement)

Produkt Specifikationer

Mærke:	Kidde
Kategori:	Røgdetektor
Model:	P4010ACLEDS-2

Har du brug for hjælp?

Hvis du har brug for hjælp til Kidde P4010ACLEDS-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Røgdetektor Kidde Manualer

Kidde CO120X Manual

11 December 2024

Kidde 3SFWR Manual

24 September 2024

Kidde KF30R Manual

24 September 2024

Kidde P4010ACS-WCA Manual

24 September 2024

Kidde P4010DCSCO-WCA Manual

24 September 2024

Kidde i12020CA Manual

24 September 2024

Kidde i12040CA Manual

24 September 2024

Kidde KF20R Manual

24 September 2024

Kidde CP9000CA Manual

24 September 2024

Kidde Pi2010CA Manual

24 September 2024

Røgdetektor Manualer

Nyeste Røgdetektor Manualer

Hochiki HCA-4 Manual

26 Februar 2025

Hochiki SOC-24V Manual

25 Februar 2025

Hochiki ALN-V Manual

25 Februar 2025

Hochiki ACC-V Manual

25 Februar 2025

First Alert SMICO105-AC Manual

23 Februar 2025

First Alert SMICO110 Manual

23 Februar 2025

Drayton CCT599002 Manual

20 Februar 2025

LogiLink SC0016 Manual

29 Januar 2025

Ei Electronics Ei156TLH Manual

14 Januar 2025

FirstAlert SA700CE Manual

12 Januar 2025