Kimo MP 112 Manual

Kimo Måling MP 112

Læs gratis den danske manual til Kimo MP 112 (4 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Kimo MP 112, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Manometer

USER MANUAL

Description of the device

1. OK key

2. Backlight key

3. Select key

4. On/Off/Esc key

5. Hold/min/max key

MP 110 – MP111

MP112 – MP 115

Technical specications

General features

Measuring element Piezoresistive sensor

Tolerated overpressure MP 110: 250 mbar / MP 111: 700 mbar / MP 115: 1.4 bar / MP 112: 3 bar

Connector

MP 110 / 111: Ø 6.2 mm barbed connectors made of nickelled brass / MP 115 / 112: Ø 4.6 mm barbed connectors made of

nickelled brass

Display

4 lines, LCD technology. Dimensions 50 x 36 mm.

2 lines of 5 digits with 7 segments (value)

2 lines of 5 digits with 16 segments (unit)

Housing ABS, protection IP54

Keypad 5 keys

European directives 2014/30/EU EMC; 2014/35/EU Low Voltage; 2011/65/EU RoHS II; 2012/19/EU WEEE

Power supply 4 batteries AAA LR03 1.5 V

Battery life 180 hours

Ambience Neutral gas

Conditions of use (°C, %RH, m) From 0 to +50 °C. In non condensing conditions. From 0 to 2000 m.

Storage temperature From -20 to +80 °C

Auto shut-off Adjustable from 0 to 120 min

Weight 220 g

Parameter Models Measuring units Accuracy* Measuring range Resolution

Pressure

MP 110 Pa, mmH

O, inWg, daPa ±0.5% of reading ±2 Pa From -1000 to +1000 Pa 1 Pa

MP 111

kPa, mmH

O, inWg, mbar,

mmHg, daPa

±0.5% of reading ±2 mmH

O From -1000 to +1000 mmH

From 0 to ±200OmmH

0.1 mmH

Beyond: 1 mmH

MP 115

kPa, inWg, mbar, mmHg,

PSI

±0.5% of reading ±0.5 mbar From -500 to +500 mbar 0.1 mbar

MP 112

kPa, inWg, mbar, mmHg,

PSI, bar

±0.5% of reading ±2 mbar From -2000 to +2000 mbar 1 mbar

*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation.