König CMP-EHUB15 Manual

König Skifte CMP-EHUB15

Læs gratis den danske manual til König CMP-EHUB15 (40 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om König CMP-EHUB15, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

5PORTOVÝ ETHERNETOVÝ PŘEPÍNAČ

5 PORTIN ETHERNET-KYTKIN

CONMUTADOR ETHERNET

DE 5 PUERTOS

5 POORTEN ETHERNET SWITCH

ETHERNET-SWITCH MIT

5 ANSCHLÜSSEN

SWITCH ETHERNET CU 5 PORTURI

ETHERNET 5-PORTS SWITCH

5- PORTOS ETHERNET-KAPCSOLÓ

COMMUTATORE ETHERNET A 5 PORTE

COMMUTATEUR ETHERNET 5 PORTS

ETHERNET 5 PORT SWITCH

CMP-EHUB15

ΔΙΑΚΟΠΤΗΣ ETHERNET 5 ΘΥΡΩΝ

ENGLISH

Desktop or shelf installation

When installing the switch on a desktop or shelf, attach these cushion feet on the

bottom at each corner of the device. Allow enough ventilation space between the

device and the objects around it.

Power supply

The switch can be used with 110-240VAC/50-60 Hz input, DC9V/600mA output.

Connecting the switch

PC to switch

A PC can be connected to the switch via a two-pair category 5 UTP/STP straight

cable. The PC (equipped with a RJ-45 10/100Mbps jack) can be connected to

any of the ports. According to the connected network cards, the LEDs indicate at

which speed the card operates. If the LED indicators do not light up after making

a proper connection, check the PC’s LAN card, the cable, switch conditions and

connections. The LED indicator lights up after you’ve made a proper connection.

HUB to switch

A HUB (10/100Base-T) can be connected to the switch via a two-pair category

5 UTP/STP straight cable. Connect a cable to the hub’s uplink (MDI-II) port to any

of the switch’ ports (MDI-X).

Hub without uplink (MDI-II) port

If the hub is not equipped with an uplink (MDI-II) port, you make a connection

using either a straight cable or a crossover cable (see Appendix B,Technical

Specifications for cable requirements).

Using straight cable

When using a straight cable, the connection can be made from the uplink (MDI-II)

port of the switch to any port of the hub.

Using crossover cable

When using a crossover cable, the connection can be made from any port of the

switch to any port of the hub.

Switch to switch (other devices)

The switch can be connected to another switch or device (router, bridge, etc.)via a

two-pair category 5UTP/STP straight or crossover cable.

Using straight cable

When using a straight cable, this is done from the uplink (MDD-II) port of the switch

to any of the 10Mbps or 100Mbps (MDI-X) ports of the other switch or device.

Using crossing cable

When using a crossover cable, this is done from any (MDI-X) port of the switch to

any of the 10Mbps or 100Mbps(MDI-X)port of the other switch or device.

NOTE: The first twisted-pair port (port 1x) is shared with the uplink port. If you

connect a hub to the uplink port, then do not use port 1x.

Produkt Specifikationer

Mærke:	König
Kategori:	Skifte
Model:	CMP-EHUB15
Produktfarve:	Grå
Wi-Fi:	Ingen
Dimensioner (BxDxH):	- mm
Forbindelsesteknologi:	Ledningsført
LED-indikatorer:	Link, Power
Effektkrav:	DC 9V/600mA
Indgangsspænding:	100 - 240 V
Maksimal dataoverførselshastighed:	0.1 Gbit/sek.
Strøm-LED:	Ja
Strøm over Ethernet (PoE):	Ingen
Indgangsfrekvens:	50/60 Hz
10G understøttelse:	Ingen
Kobber ethernet kabelteknologi:	100BASE-TX, 10BASE-T
Basis omskiftning RJ-45 Ethernet porte, antal:	5
MAC adresselabel:	0 entries
Switch kapacitet:	- Gbit/sek.
Understøttede dataoverførselshastigheder:	10/100 Mbps
Strømstik:	DC-in-stik
Stabelbar:	Ingen
Antal strømforsyninger:	1