Konstant Lab M2S Manual

Konstant Lab Ikke kategoriseret M2S

Læs gratis den danske manual til Konstant Lab M2S (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Konstant Lab M2S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

M2S

Mono to Stereo? or Stereo to Mono? …both way!

M2S is passive eurorack module. You can convert signal from two mono

channels to stereo jack (or backwards). M2S can be also used like passive stereo

output module. Two mono signals can be connected in to R and L jacks. Then you

can connect headphones or cable to active loudspeakers to stereo output. M2S can

also make “stereo” signal from one mono signal. If you connect only one mono signal

to L(MONO) jack, copy of this signal will be on both L and R signals on STEREO

output.

There are two independent sections in one M2S module. Both sections can

work in various working modes. Modes are switched by Switch* on bottom side.

Section 2 with protection resistors in L and R channel is suitable to mix both channels

in stereo signal to one MONO signal.

1=2 mode – in this mode is 1L (mono) channel shared also to section 2. 1L

(mono) input is copied to both stereo outputs. In case of connection of second mono

signal to 2L (MONO) jack, sharing of 1L signal will be cut. If you do not want to cut

this sharing you have to connect solder jumper J1** with solder iron and solder wire

(just solder two points together). When jumper J1** is connected and you insert

stereo signal in to 2 STEREO jack, L and R channels will be joined to one mono

signal and will be shared to both L(MONO) jacks.

1x2 mode – This mode provides two separated sections: mono to stereo or

stereo to mono sections. There is no connection between section 1 and 2. For mixing

L and R stereo channels use primary section 2.

M2S doesn’t require any power – it is passive module.

www.konstantlab.audio

info@konstantlab.audio

www.konstantlab.audio

info@konstantlab.audio

Switch*

Specs

Power: 0mA

Wide: 2HP

Depth: 15mm

Accessories:

2 screws

2 washers

Jumper J1**

Produkt Specifikationer

Mærke:	Konstant Lab
Kategori:	Ikke kategoriseret
Model:	M2S

Har du brug for hjælp?

Hvis du har brug for hjælp til Konstant Lab M2S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Konstant Lab Manualer

Konstant Lab Mult9 Manual

24 August 2024

Konstant Lab M2S Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ORNO OR-PSU-1675 Manual

15 Juni 2025

EmberGlo ES5CTS Manual

15 Juni 2025

Chapin 8201A Manual

15 Juni 2025

Gourmia GDK2365 Manual

15 Juni 2025

Xiaomi Wireless Mouse 3 Manual

15 Juni 2025

Auray SVRK-12U-D Manual

15 Juni 2025

Aiphone IXGW-TGW Manual

15 Juni 2025

Aiphone AC-2DE Manual

15 Juni 2025

Schlage S280 Manual

15 Juni 2025

Cleveland PGM3002 Manual

15 Juni 2025