KoolScapes FJ-200 Manual

KoolScapes Ikke kategoriseret FJ-200

Læs gratis den danske manual til KoolScapes FJ-200 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om KoolScapes FJ-200, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Warranty
This KOOLATRON product is warranted to the retail customer for 90 days from
date of retail purchase, against defects in material and workmanship.
WHAT IS COVERED
• Replacement parts and labour.
• Transportation charges to customer for the repaired product.
WHAT IS NOT COVERED
• Damage caused by abuse, accident, misuse, or neglect.
• Transportation of the unit or component from the customer to Koolatron.
Any implied warranties, including the implied warranty of merchantability are also
limited to the duration of 90 days from the date of retail purchase.
WARRANTY REGISTRATION
Register on-line at www.koolatron.com AND keep the original, dated, sales receipt
with this manual.
WARRANTY AND SERVICE PROCEDURE
If you have a problem with your PRODUCT, or require replacement parts, please
telephone the following number for assistance:
North America 1-800-265-8456
Koolatron has Master Service Centres at these locations:
Koolatron U.S.A.
4330 Commerce Dr.
Batavia, NY 14020-4102 U.S.A.
Koolatron Canada
27 Catharine Ave.
Brantford, ON N3T 1X5 Canada
A vice Centre must perform all warranty work.
www.koolatron.com
©2009 Koolatron, Inc. All rights reserved.All specification are subject to change without notice.
Made in China
10/2009-v1H1S103
Please Read These Instructions Carefully Before Use!
User Manual
FJ-92
FJ-172
FJ-200
FJ-250
FOUNTAIN JET
STATUARY PUMPS
WARNING
• Do not connect to any voltage other than that shown on the pump.
• Do not pump flammable liquids.
• To reduce the risk of electrical shock, use only on portable self-contained fountains no
larger than 1.5 m in any dimension.
• The pump should not be used in water over than 1.5m depth.
• The supply cord cannot be replaced. If the cord is damaged the appliance should be
scrapped.
CAUTION
• Always disconnect from electrical outlet before handling the pump.
• Don’t operate without water.
• Do not lift the pump by the power cord.
• Operate in freshwater only.
• Operate pump completely submerged for proper cooling.
• Not for use in swimming pools.
• This product must not be disposed together with domestic waste. This product has to
be disposed at an authorized place for recycling of electrical and electronic appliances.
• By collecting and recycling waste, you help save natural resources, and make sure the
product is disposed in an environmental friendly and healthy way.
PERFORMANCE
A clogged or dirty intake screen will greatly reduce performance.
- If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris
contacting the intake. If less flow is desired, adjust the flow control lever on the side of
the pump or restrict the discharge flow.
- Do not let the pump run when not submerged in water. Doing so may damage the pump.
Always submerge the pump first, and then plug in the electrical outlet. At the beginning,
it probably can’t pump water, because there is air in the pump and the tube. Don’t worry
about it. Please pull out and insert electrical outlet several times, it will work very well at
once.
- The pump is to be supplied through a residual current device (RCD) with a rated residual
operating current not exceeding 30mA.
MAINTENANCE
To clean the pump, remove the back cover and the impeller.
Use a small brush or stream of water to remove any debris
CAUTION: The pump shaft can not be removed.
IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
• Check the circuit breaker and try another outlet to ensure the pump is getting electrical
power. Always disconnect from electrical outlet before handling the pump.NOTE:
• Check the pump discharge and tubing for kinks and obstructions. Algae build up can be
flushed out with a garden hose.
• Check the inlet to ensure it is not clogged with debris.
• Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not
broken or jammed.
• Monthly maintenance will add to your pump’s life. Ensure that the electrical cordNOTE:
loops below the electrical outlet to form a “Drip Loop” This will prevent water from
running down the cord into the electrical outlet.
regulator
front cover
seal ring
impeller
impeller holder
shaft
suction brackets
motorhead

Produkt Specifikationer

Mærke: KoolScapes
Kategori: Ikke kategoriseret
Model: FJ-200

Har du brug for hjælp?

Hvis du har brug for hjælp til KoolScapes FJ-200 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret KoolScapes Manualer

KoolScapes

KoolScapes WTCB-50 Manual

23 Juli 2025
KoolScapes

KoolScapes PJ-200 Manual

28 Juni 2025
KoolScapes

KoolScapes FSK-01 Manual

26 Juni 2025
KoolScapes

KoolScapes KSPK-270SL Manual

26 Juni 2025
KoolScapes

KoolScapes PJ-530 Manual

25 Juni 2025
KoolScapes

KoolScapes PJ-340 Manual

25 Juni 2025
KoolScapes

KoolScapes KSPK-400G-SL Manual

25 Juni 2025
KoolScapes

KoolScapes FJ-200 Manual

7 Juni 2025
KoolScapes

KoolScapes CSFK-5 Manual

7 Juni 2025
KoolScapes

KoolScapes FJ-92 Manual

7 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Miele

Miele WTV 511 Manual

10 Oktober 2025
Miele

Miele WTV 601 Manual

10 Oktober 2025
Miele

Miele GaLa-S Manual

10 Oktober 2025
TOA

TOA HS-150B Manual

10 Oktober 2025
Oras

Oras Saga 3970 Manual

10 Oktober 2025
TOA

TOA AT-4030B-EB Manual

10 Oktober 2025
TOA

TOA VX-030DA Manual

10 Oktober 2025
TOA

TOA RS-481 Manual

10 Oktober 2025
TOA

TOA AT-4200B-EB Manual

10 Oktober 2025
Xerox

Xerox DocuShare Manual

10 Oktober 2025