Korg AW-LT100V Manual

Korg Ikke kategoriseret AW-LT100V

Læs gratis den danske manual til Korg AW-LT100V (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Korg AW-LT100V, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
- 1 -
Published 10 018 /2 Printed in etnamVi
Thank you for purchasing the Korg AW-LT100V Clip-on Tuner. To
help you get the most out of your new instrument, please read
this manual carefully.
Merci d’avoir choisi la Clip-on Tuner AW-LT100V de Korg. An de
pouvoir exploiter au mieux toutes les possibilités offertes par
l’instrument, veuillez lire attentivement ce manuel.
Vielen Dank, dass Sie sich für einen AW-LT100V Clip-on Tuner
von Korg entschieden haben. Bitte lesen Sie sich diese Anleitung
vollstädig durch, um bei der Bedienung alles richtig zu machen.
Gracias por comprar el anador para enchufar AW-LT100V Clip-
on Tuner de Korg. Por favor, lea este manual atentamente y
guárdelo para futuras consultas.
このたびは、コルグClip-on Tuner AW-LT100Vをお買い上
げいただきまして、まことにありがとうございます。本製品
を末永くご愛用いただくためにも、取扱説明書をよくお読み
になって、正しい方法でご使用ください。
Precautions
Location
Using the unit in the following locations can result in a malfunction.
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic elds
Power supply
Be sure to turn o the power when the unit is not in use. Remove the battery in
order to prevent it from leaking when the unit is not in use for extended periods.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid
cleaners such as benzene or thinner, or cleaning compounds or ammable polishes.
Keep this manual
After reading this manual, please keep it for later reference.
Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equipment. If liquid gets into
the equipment, it could cause a breakdown, re, or electrical shock. Be careful
not to let metal objects get into the equipment.
THE FCC REGULATION WARNING (for USA)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If items such as cables are included with this equipment, you must use those
included items.
Unauthorized changes or modification to this system can void the user’s
authority to operate this equipment.
Notice regarding disposal (EU only)
If this symbol is shown on the product, manual, battery, or package, you
must dispose of it in the correct manner to avoid harm to human health
or damage to the environment. Contact your local administrative body
for details on the correct disposal method. If the battery contains heavy
metals in excess of the regulated amount, a chemical symbol is displayed
below the symbol on the battery or battery package.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAN ICES-3 B / NMB-3 B.
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict specifications and
voltage requirements that are applicable in the country in which it is intended
that this product should be used. If you have purchased this product via the
internet, through mail order, and/or via a telephone sale, you must verify that
this product is intended to be used in the country in which you reside.
WARNING: Use of this product in any country other than that for which it is
intended could be dangerous and could invalidate the manufacturer’s or
distributor’s warranty.
Please also retain your receipt as proof of purchase otherwise your product
may be disqualied from the manufacturer’s or distributor’s warranty.
* All product names and company names are the trademarks or registered
trademarks of their respective owners.
アフターサービス
修理または商品のお取り扱いについてのご質問、ご相談は、お
客様相談窓口へお問い合わせください。
お客様相談窓口　
PHS等一部の電話ではご利用できません。固定電話または
携帯電話からおかけください。
受付時間　月曜～金曜　10:00 ～ 17:00　（祝祭日、窓口休
業日を除く）
●サービス・センター：
　〒168-0073　東京都杉並区下高井戸1-18-16　2F
■ お願い
1. 保証書に販売年月日等の記入がない場合は無効となりま
す。記入できないときは、お買い上げ年月日を証明できる領
収書と一緒に保管してください。
2. 保証書は再発行致しませんので、紛失しないように大切に
保管してください。
コルグ
AW-LT100V 保証書
本保証書は、保証規定により無償修理をお約束するものです。
お買い上げ日 年　　　　月　　　　日
販売店名
Owner’s Manual (¬p.2)
Manuel d’utilisation (¬p.5)
Bedienungsanleitung (¬s.6)
Manual de usuario ( )¬p.7
取扱説明書 (¬p.8)
- 2 -
Parts of the AW-LT100V
a. Left shuttle switch b. Right shuttle switch
c. Battery compartment (Rear) d. Tuner mode indicator
e. Pure major third f. Pure minor third
g. Reference pitch indicator h. Meter
i. Note name indicator j. PURE 5TH indicator
k. Battery indicator
Installing the battery
When the battery becomes depleted, a
battery symbol ( ) will appear on the
display. Immediately replace the battery
with a new one.
1. Open the battery compartment cover on
the rear of the tuner in the direction of
the arrow.
2. Insert the battery, making sure to observe
the correct polarity, and then close the
cover.
Attaching to the instrument and range of motion
The AW-LT100 V tunes by pic king up the
vibrations of the instrument. Therefore, attach
the AW-LT1 00V to the headstock o f your
instrument in order to tune it. Additionally, the
AW-LT100V can be freely moved so that the
display is easy to read.
The AW-LT100V may be damaged if you
apply excessive force within its range of
motion, or attempt to move it beyond its
intended range of motion.
Please carefully attach the AW-LT100V to
your instrument. Leaving the AW-LT100V
attached for a long time may damage or
mark the instrument's surface.
Depending on various factors such as age-
related change or the surface nish, there is
a possibility that your instrument may be damaged by attaching this
product.
Tuning
Tuning procedure
1. Turn the upward. Each time you turn the shuttle left shuttle switch
switch, the AW-LT100V will be turned on or o.
If the power is left on for approximately 20 minutes without any user
input, it will turn o automatically (Auto power-o function).
2. If necessary, change the reference pitch (calibration) and tuner mode.
The procedure with the tuner mode set to chromatic (factory default; no
mode indicator,) is described below.
3. Play a single note on your instrument.
The note name closest to the detected
pi t c h a ppe ar s i n t he note nam e
indicator. Tune your instrument until
the correct note name appears in the
display and the meter segments at the
center ( ) light up.
An indicator toward the right will light
up if the pitch is too high, and an indicator toward the left will
light up if the pitch is too low. If you want to tune to a pure major
third or pure minor third above a certain note, adjust the pitch to
the pure major or minor third marks on the meter. For example
if you want to tune to a pure major third above A, make the note
name indicator read C#, and tune so that the meter indicates the
left . Alternatively, if you want to tune to a pure minor third
above A, make the note name indicator read C, and tune so that
the meter indicates the right .
Even if the pitch is within the range of detection, it may not
be possible to detect the pitch of an instrumental sound that
contains large numbers of overtones or a sound that has a rapid
decay.
The meter may respond to vibrations it picks up from the
environment; however, this will not affect tuning of the
instrument.
Setting the tuner mode (*M)
Each time you turn the downward, the tuner mode left shuttle switch
changes, with the current mode shown by the tuner mode indicator.
Chromatic (no indicator) ¬ Violin ( ) ¬ Viola ( ) ¬
Chromatic ...
In the violin and viola modes, the string number closest
to the detected pitch appears to the left of the note name
indicator.
Note name indicators for violin mode : 4G, 3D, 2A, 1E
Note name indicators for viola mode : 4C, 3G, 2D, 1A
In the violin and viola modes, appears in the
lower-left corner of the display to indicate the pure fth
temperament relative to the A string.
Reference pitch settings (calibration) (*M)
Each time you turn the upward (or downward), right shuttle switch
the reference pitch (calibration value) increases (or decreases) in 1 Hz
steps.
Backlight
After turning the upward to turn on the AW-left shuttle switch
LT100V, you can change the brightness of the display by keeping the
left shuttle switch turned upward for approximately 2 seconds.
Auto : The backlight will light brightly when sound is inputted or
when a shuttle switch is operated. When there has been no sound
input or shuttle switch operation for approximately three seconds
after the power has been turned on, the backlight will turn off in
order to prevent the battery from being depleted.
Soft : The backlight will light at a lower level of brightness in order to
prevent the battery from being depleted.
Specications
Scale: 12-note equal temperament (Chromatic)
Pure fth (Violin, Viola)
Range (sine wave): Chromatic A0 (27.50 Hz)–C8 (4186 Hz)
Precision: +/-1 cent
Reference pitch: A4 = 410–480 Hz (1 Hz steps)
Dimensions (W x D x H):
60 mm x 39 mm x 72 mm / 2.36’’ x 1.54’’ x 2.83’’
Weight: 32 g/1.13 oz. (including battery)
Power supply: One AAA Battery
Battery life: approximately 100 hours
(Backlight:Soft, tuner continuously operating, A4
input, when using alkaline battery)
Included items: Owner’s manual, One AAA battery
*M Settings are remembered even when the power is o.
• Specifications and appearance are subject to change without
notice for improvement.
Meter indications
when correctly tuned
Violin
3rd string
Viola
4th string
340°
100°
10
°
10°

Produkt Specifikationer

Mærke: Korg
Kategori: Ikke kategoriseret
Model: AW-LT100V

Har du brug for hjælp?

Hvis du har brug for hjælp til Korg AW-LT100V stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Korg Manualer

Korg

Korg nanoKEY Fold Manual

21 Juli 2025
Korg

Korg ST1K Manual

10 Januar 2025
Korg

Korg Pitchstrap Manual

18 December 2024
Korg

Korg STB1 Manual

11 December 2024
Korg

Korg Sample Builder Manual

11 December 2024
Korg

Korg ST-SV1-BK Manual

11 December 2024
Korg

Korg PC-400 Manual

5 September 2024
Korg

Korg USB Boot Utility Manual

28 August 2024
Korg

Korg SY-1D Manual

28 August 2024
Korg

Korg Magnetune MG1 Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Black Diamond

Black Diamond HotForge Hybrid Quickpack Manual

31 Juli 2025
RADEMACHER

RADEMACHER RolloTron Comfort DuoFern 1800 Manual

31 Juli 2025
Infiniton

Infiniton GG-430 Manual

31 Juli 2025
AIC

AIC RSC-4ET Manual

31 Juli 2025
Advantech

Advantech PPC-MB-610 Manual

31 Juli 2025
Intellinet

Intellinet 561730 Manual

31 Juli 2025
Oppo

Oppo X7 Ultra Manual

31 Juli 2025
Oppo

Oppo K11 Manual

31 Juli 2025
Bestway

Bestway Hydro-Force 6531R Manual

31 Juli 2025
RYOBI

RYOBI RSCR4 Manual

31 Juli 2025