Krowne 12-812L Manual

Krowne Vandhane 12-812L

Læs gratis den danske manual til Krowne 12-812L (4 sider) i kategorien Vandhane. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Krowne 12-812L, eller vil du spørge andre brugere om produktet?

Side 1/4
8” Center Wall Mount Faucet
Installation Manual
12-8 Faucets
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
12-8 Faucets Installation Manual
Installation Instructions
1. Turn off water supply at main source before proceeding with installation.
2. Remove the two 1/2” threaded nipples (A) from the wall mount kit (not included).
3. Apply thread sealant tape or pipe joint compound to one side of each of the two threaded
nipples (you will apply to the other side after step #5 is completed).
4. Install the threaded nipples with the sealant into the two 1/2” female threaded coupling
anges (B) and tighten properly. It is important to know that the coupling anges have
eccentric centers. This means that if the holes for the threaded nipples are not exactly
8” on center, it allows you to adjust the center distance.
5. From the front of the sink, insert the threaded nipples into the faucet holes in the sink. Make
sure the coupling anges are turned so the brass nipples are at the 12 o’clock position. This
is necessary to make sure the faucet is level.
6. Apply thread sealant tape or pipe joint compound to the other side of each of the two
threaded nipples. This step is not necessary if you are using the Krowne E-Z install exible
water line kit, as these use compression ttings.
7. From the back of the sink, place the black rubber washer, rosette, and ange nut from the
mounting kit onto the threaded nipples and tighten with a wrench.
8. From the front of the sink, insert the rubber washers (C) into the coupling anges (B).
9. Install the faucet body (D) onto the coupling anges and tighten properly with a wrench. If
the faucet does not t on the coupling anges, rotate the anges to t the faucet per step 5.
10. From the front of the sink, install the spout (E) and tighten properly.
11. From the back of the sink, install the water supply lines and tighten properly.
Note: Before starting installation, it is necessary to purchase a mounting kit. We recommend the
Krowne’s Mounting Kit for Wall Mount Faucets (model 21-194L). For a mounting kit with water
lines, we recommend Krowne’s E-Z Install Flexible Water Line Kit (model 21-445L). These kits do
not use thread sealant tape or pipe joint compound. Kits come with 1/2” compression 90° ttings
on one side and 3/8” compression ttings that secure directly onto the supply stops. These are
available in 22”, 24” and 30” lengths.
WARNING: Plumbing connections should be made by qualified personnel
who will observe all applicable plumbing, sanitary and safety codes.
NOTE: This is NOT INCLUDED with Silver
Series 8” Wall Mount Plumbing products
(Model 21-194L)
E
D
C
B
Sink/Mounting
Surface
A
Black Rubber Washer
Rosette
Lock Nut


Produkt Specifikationer

Mærke: Krowne
Kategori: Vandhane
Model: 12-812L

Har du brug for hjælp?

Hvis du har brug for hjælp til Krowne 12-812L stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vandhane Krowne Manualer

Krowne

Krowne 12-812L Manual

17 September 2025
Krowne

Krowne 14-812L Manual

27 August 2025
Krowne

Krowne 10-400L Manual

25 August 2025
Krowne

Krowne 11-400L Manual

25 August 2025
Krowne

Krowne 14-808L Manual

25 August 2025
Krowne

Krowne 10-410L Manual

25 August 2025
Krowne

Krowne 11-406L Manual

25 August 2025
Krowne

Krowne 11-412L Manual

25 August 2025
Krowne

Krowne 14-814L Manual

25 August 2025
Krowne

Krowne 12-808L Manual

25 August 2025

Vandhane Manualer

Nyeste Vandhane Manualer

Ikea

Ikea ENSEN 005.325.41 Manual

17 September 2025
Eversteel

Eversteel S-1125 Manual

16 September 2025
Delta

Delta 534LF Manual

8 September 2025
ARC

ARC ITSC2 Manual

4 September 2025