KStrong UFL205401 Manual

KStrong Ikke kategoriseret UFL205401

Læs gratis den danske manual til KStrong UFL205401 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om KStrong UFL205401, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
UFL205201, UFL205211, UFL205251, UFL205202, UFL205215,
UFL205401, AND UFL205201(02), UFL205201(03)
THESE INSTRUCTIONS APPLY TO THE FOLLOWING MODELS:
WORK POSITIONING LANYARDS
USER INSTRUCTION MANUAL
01
This manufacturer's user instruction manual meets the requirements of ANSI Z359.3-2017. As per OSHA, this manual
should be used as a part of an employee training program.
The products enumerated in this instruction manual are a part of a Work Positioning System. It is important that the user
reads and follows the manufacturer's instructions for each component of the system. This manual contains information
which is important to your safety and should be kept in a safe place for future reference as needed. The instructions
provided in this manual are meant for the use of this equipment and should be read thoroughly and understood by the
user before the equipment is used. Manufacturer's instructions must be properly followed for the correct use and
maintenance of this equipment. Please contact KStrong for any questions regarding use of this equipment.
This equipment is meant only for work positioning and should never be used for fall arrest. Fall arrest systems are
comprised of separate sub-components, which reduce the potential of serious injuries in the event of a fall. Work
positioning systems only aid in the positioning of the user at height, so that the user may work at height with both hands
free. The fall arrest system is separately connected to the wearer, and is necessary to be used along with a work
positioning system, so that complete safety of the user is ensured.
TRAINING
In order to ensure that the user is familiar with the instructions provided in this manual, it becomes the responsibility of
the user to undergo proper training on the proper inspection, use and maintenance of this equipment. It is also the
employer's responsibility to ensure that all the users are trained in proper use, inspection and maintenance of work
positioning and Fall Protection Equipment.
TECHNICAL SPECIFICATIONS
IMPORTANT INFORMATION
It is important to inspect the equipment according to the manufacturer's instructions before each use.
Inspection of equipment should be conducted on a regular basis by a qualified person, and results must be
recorded in the inspection log.
DO NOT REMOVE product labels which include important warnings and information for the authorized person.
"Authorized Person" is a person who is exposed to fall hazards during the course of their work. This individual
requires formal training in the use of personal fall protection equipment and systems. The term "Authorized
Person" may be used interchangeably with "User" and "End-User".
DO NOT ALTER the equipment in any way.
Always send the equipment back to the manufacturer, or to persons or entities authorized in writing by the
manufacturer, for any repairs if required.
Never use any natural material like manila, cotton, etc. as part of a Fall Protection System.
Fall protection equipment should only be used for the purpose for which it has been designed. Work positioning
lanyards are not to be used for material handling, and other such activities.
This equipment should never be used for towing and hoisting or for any other purpose than its intended use.
A competent person must ensure compatibility of the system to minimize any potential for accidental disengagement.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
UFL205401
Grade 80 (Straight Link)
Steel
1.
Min.10000 lbs.
ANSI Z 359.3-2017
KStrong Positioning
Grade of Chain
Hardware
S.No.
Tenstile
Strength
Conformity
KStrong Work
Positioning Lanyard/
Device Model
Construction of
Webbing
Hardware
S.No.
Minimum Breaking
Strength
Conformity
UFL205201
UFL205211
UFL205251
Polyester & Nylon
Polyester & Nylon
Polyester & Nylon
Steel
Steel
Steel
1.
2.
3.
5000 lbs.
5000 lbs.
5000 lbs.
ANSI Z359.3-2017
ANSI Z359.3-2017
ANSI Z359.3-2017
UFL205202
UFL205215
UFL205201(02)
UFL205201(03)
Polyester & Nylon
Polyester & Nylon
Steel
Steel
4.
5.
5000 lbs.
5000 lbs.
ANSI Z359.3-2017
ANSI Z359.3-2017
6.
7.
Polyester & Nylon
Steel
5000 lbs.
ANSI Z359.3-2017
Polyester & Nylon
Steel
5000 lbs.
ANSI Z359.3-2017

Produkt Specifikationer

Mærke: KStrong
Kategori: Ikke kategoriseret
Model: UFL205401

Har du brug for hjælp?

Hvis du har brug for hjælp til KStrong UFL205401 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret KStrong Manualer

KStrong

KStrong UFS310050 Manual

17 September 2025
KStrong

KStrong UFA30001 Manual

17 September 2025
KStrong

KStrong UFL201101 Manual

17 September 2025
KStrong

KStrong UFS310010 Manual

17 September 2025
KStrong

KStrong UFS310030 Manual

17 September 2025
KStrong

KStrong UFA20006 Manual

17 September 2025
KStrong

KStrong Wrangler UFA40010 Manual

17 September 2025
KStrong

KStrong UFA30110 Manual

16 September 2025
KStrong

KStrong UFS310020 Manual

16 September 2025
KStrong

KStrong UFA20003 Manual

16 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Miele

Miele WTV 511 Manual

10 Oktober 2025
Miele

Miele WTV 601 Manual

10 Oktober 2025
Miele

Miele GaLa-S Manual

10 Oktober 2025
TOA

TOA HS-150B Manual

10 Oktober 2025
Oras

Oras Saga 3970 Manual

10 Oktober 2025
TOA

TOA AT-4030B-EB Manual

10 Oktober 2025
TOA

TOA VX-030DA Manual

10 Oktober 2025
TOA

TOA RS-481 Manual

10 Oktober 2025
TOA

TOA AT-4200B-EB Manual

10 Oktober 2025
Xerox

Xerox DocuShare Manual

10 Oktober 2025