WAC Lighting LTK-104 Manual

WAC Lighting Ikke kategoriseret LTK-104

Læs gratis den danske manual til WAC Lighting LTK-104 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3 anmeldelser. Har du et spørgsmål om WAC Lighting LTK-104, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014
INSTALLATION INSTRUCTION
HT -104, LT -104, JT -104K K K (Available in LED)
CAUTION:
Read all instructions before installing.
Switch o power before installing or re-lamping.
Do not attempt to energize anything other than a track light xture.
All installation shall be in accordance with NEC and all local codes.
OVERVIEW:
Fixtures are designed for use on on WAC “L” , “H”, “J” series track.
They may also be used on other manufacturer’s brand of track
(consult factory for compatibility).
LAMPING:
1. Fixture is supplied with dimmable GU10 lamp. (LED Lamp included
when purchased as LED).
2. Insert lamp into the shade so the lamp pins protrude through the
back.
3. Place pins in the socket holes and twist 1/4” to the right.
The lamp should feel firmly seated.
4. Seat the lamp under the “V” spring of the gimbal ring.
FIXTURE INSTALLATION
1. Note the track has a groove running it’s length to indicate polarity.
2. Note the arrow on the locking tab.
3. Insert adapter into track slot and rotate it 90°. The arrow should
point to the grooved side of the track.
4. Make sure the locking tab seats in the track slot.
5. Removal is the reverse procedure. Track heads may be positioned
anywhere along the track length.
Push lamp into socket, then twist.
Seat lamp under the “V” spring

Produkt Specifikationer

Mærke: WAC Lighting
Kategori: Ikke kategoriseret
Model: LTK-104

Har du brug for hjælp?

Hvis du har brug for hjælp til WAC Lighting LTK-104 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret WAC Lighting Manualer

WAC Lighting

WAC Lighting MT-4LD211NE Manual

10 Januar 2026
WAC Lighting

WAC Lighting T24-GE3 Manual

9 Januar 2026
WAC Lighting

WAC Lighting LTK-104 Manual

9 Januar 2026
WAC Lighting

WAC Lighting HR-837 Manual

9 Januar 2026
WAC Lighting

WAC Lighting JT8 Manual

9 Januar 2026
WAC Lighting

WAC Lighting MT4LD311NE Manual

9 Januar 2026
WAC Lighting

WAC Lighting MT4LD316NE Manual

9 Januar 2026
WAC Lighting

WAC Lighting MT-4LD416N Manual

9 Januar 2026
WAC Lighting

WAC Lighting MT-4LD216N Manual

9 Januar 2026
WAC Lighting

WAC Lighting H-8010 Manual

9 Januar 2026

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea

Ikea HÄSTVISKARE 305.552.96 Manual

10 Januar 2026
Ikea

Ikea UNDERVISNING 505.600.65 Manual

10 Januar 2026
Ikea

Ikea ENHET 706.139.06 Manual

10 Januar 2026
Ikea

Ikea FRYKSÅS 905.740.94 Manual

10 Januar 2026
Brother

Brother PT-E920BT Manual

10 Januar 2026
Lark

Lark 83853 Manual

10 Januar 2026
Maax

Maax 105413 Manual

10 Januar 2026
MediTub

MediTub 3260 Manual

10 Januar 2026
Ikea

Ikea VARMFRONT 605.616.82 Manual

10 Januar 2026
Ikea

Ikea BODBYN 705.686.02 Manual

10 Januar 2026