Kurzweil Forte SE Manual

Kurzweil Tastatur Forte SE

Læs gratis den danske manual til Kurzweil Forte SE (18 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Kurzweil Forte SE, eller vil du spørge andre brugere om produktet?

Side 1/18
is guide will help you hook up the Forte SE to your sound system and MIDI system, give you a quick
overview, and show you how to start playing music with the Forte SE. A full manual for the Forte SE can
be obtained in electronic format from www.kurzweil.com.
Specications
Forte SE is Kurzweil’s latest entry in the Forte line of stage pianos. Some of the key specications include:
FlashPlay technology with support for 2GB of Sound ROM
High Denition Japanese Grand Piano and High Denition Electric Piano
ROM sounds included from Kurzweil’s acclaimed PC3 series, KORE64 expansion,
and German D Grand EXP Grand Piano expansion
New Piano String Resonance Simulation
Full KB3 organ simulations with 9 sliders as drawbars
8 Zone MIDI Controller
Space for 1024 Factory and 1024 User Programs and Multis (16 Categories of Programs)
Arpeggiator with dedicated On/O button (1 per Program, up to 8 in Multi Mode)
MP3 player audio input jack
Full 128 voices of polyphony
Hundreds of Eects Chains
®
It’s the
sound
.
®
SE
GETTING STARTED GUIDE
Before You Start…
2
GETTING STARTED GUIDE
Before You Start…
Dont connect anything until you make sure the Forte SE is properly and safely situated. If
your Forte SE keyboard has been out in the cold, give it time to warm up to room temperature
before starting it, since condensation may have formed inside.
Setting up the Forte SE
1. Set the keyboard on a hard, at, level surface.
2. Four adhesive-backed rubber feet are provided with Forte SE. Carefully turn the keyboard
over onto a soft surface, remove the paper backing from the rubber feet and attach them.
NOTE : Unless the instrument will always be used with a keyboard stand,
attachment of the rubber feet is strongly advised. Otherwise protruding
screws will scratch the tabletop.
3. Connect the AC power cord to the Forte SE. Before plugging the cable into the power
outlet, check that the power is compatible with the Forte SE. e Forte SE runs on AC
power and works with voltages from 80-265 volts 50-60 Hz. e voltage level is detected
and set automatically by the Forte SE. If your power source does not have the standard
three hole outlet, you should take the time to install a proper grounding system. is will
reduce the risk of a shock. If your power outlet is not within these ranges it is recommended
you use an appropriate adaptor.
4. Plug the power cable into the wall.
5. Plug the Switch Pedal into the marked SW1 (Sustain) Pedal jack on the Forte SE rear
panel.
6. Connect stereo headphones to the headphone jack on the rear panel or connect the audio
outputs to your mixer or amplier inputs using standard (1/4-inch) audio cables (use the
Left out for Balanced (“TRS” or “Stereo”) cables are recommended if your mixer mono).
or amp supports balanced inputs.


Produkt Specifikationer

Mærke: Kurzweil
Kategori: Tastatur
Model: Forte SE

Har du brug for hjælp?

Hvis du har brug for hjælp til Kurzweil Forte SE stil et spørgsmål nedenfor, og andre brugere vil svare dig