Kurzweil SP6-7 Manual


Læs gratis den danske manual til Kurzweil SP6-7 (16 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Kurzweil SP6-7, eller vil du spørge andre brugere om produktet?

Side 1/16
is Getting Started Guide will give you a quick overview of the SP6. A full manual with additional
information is available from www.kurzweil.com.
Features of the SP6
FlashPlay technology utilizing 2GB of instrument samples including:
Optimized German D and Japanese C7 Pianos, Triple Strike Piano, 73 Electric Piano,
Clavinets, Harpsichords, Celeste, Bowed and Hit Crotales, Vector Synthesis Waveforms
Rock, Synth and Orchestral sounds from Kurzweil’s Forte SE, PC3, and KORE64
10 Categories of Programs (Piano, E. Piano, Clav, Organ, Strings/Pads, Brass/Winds,
Voices/Misc, Leads/Synths, Guitar/Bass, Drums/Perc)
Space for 1024 Factory and 1024 User Programs and Multis
KSR: Kurzweil String Resonance (Piano String Resonance Simulation)
Support for optional Half-Damper pedal
KB3 Organ simulations with control of 9 drawbars
Arpeggiator with dedicated On/O and Tap Tempo buttons (up to 4 simultaneous in Multi Mode)
High quality audio eects with dedicated knob assignments
4 knobs with Shift button (3 shift rows for 12 assignments per Program)
Support for up to 4 switch pedals
128 voices of polyphony
16 MIDI Channels for multitimbral applications
4 Zone MIDI Controller
®
It’s the
sound
.
®
GETTING STARTED GUIDE
Including
Quick Start
Setting Up the SP6
2
GETTING STARTED GUIDE
Quick Start
Be sure to check the Kurzweil website at www.kurzweil.com for new sounds, documentation
and software updates.
Setting Up the SP6
1. If your SP6 keyboard has been out in the cold during shipping, give it time to warm up
to room temperature before powering it on, since condensation may have formed inside.
2. Place the SP6 on a keyboard stand or on a hard, at, level surface.
3. Connect the DC power adaptor to the SP6 DC Power jack.
4. Make sure your power outlet is compatible with the included power adaptor, then plug the
power cable into the power outlet.
5. Plug the included Switch Pedal into the SW1 (SUSTAIN) jack on the SP6 rear panel.
6. If you have an additional switch pedal, plug it into the SW2 jack for sostenuto control.
7. If you have a MIDI CC pedal (also known as a MIDI expression or volume pedal), plug it
into the CC (VOLUME) jack for volume control.
8. If you are using speakers, turn the master volume all the way down on your amplier
or mixer. Using standard (1/4-inch) audio cables, rst plug into the input jacks of your
amplier or mixer, then plug the other end of the cables into the SP6 AUDIO OUT
jacks. (Connecting in this order minimizes the possibility of static discharge damage.) For
a mono signal, only use the LEFT (MONO) jack, and leave the RIGHT jack unplugged.
Balanced (“TRS” or “Stereo”) cables are recommended if your mixer or amp supports
balanced inputs.
9. If you are using headphones, connect stereo headphones to the headphone jack on the rear
panel.
10. Turn the SP6 VOLUME knob (on the far left side of the front panel) to MIN.
Powering On the SP6
1. Power on the SP6 by pressing the POWER button on the right rear panel.
2. If you are using speakers, turn up the volume on your amplier or mixer.
3. Slowly turn up the SP6 VOLUME knob and play some notes to check the volume level.
(If you have a CC pedal plugged into the CC (VOLUME) jack, make sure it is set to the
maximum volume position).
4. If you are using speakers and the SP6 is not loud enough, turn up the volume on your
amplier or mixer.


Produkt Specifikationer

Mærke: Kurzweil
Kategori: Tastatur
Model: SP6-7

Har du brug for hjælp?

Hvis du har brug for hjælp til Kurzweil SP6-7 stil et spørgsmål nedenfor, og andre brugere vil svare dig