Lasko AR122 Manual

Lasko Varmeapparat AR122

Læs gratis den danske manual til Lasko AR122 (8 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Lasko AR122, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Rev.B 10/23 AR122ES1

Used for Model:

AR122

READ AND SAVE THESE INSTRUCTIONS

Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself

and others by observing all safety information. Failure to comply with instructions could result in personal injury

and/or property damage!

This heater is for residential use only. It is not intended to be used in commercial, industrial

or agricultural settings.

Have a Question? Need a Part?

Please Do Not Return Product to Store!

Chat with us at www.lasko.com Monday-Friday 8am - 9pm EST

(Valid in U.S. and Canada only)

(Model AR122)

Smart Ceramic

Tower Heater

Instruction Manual

You will benet from:

• Efcient and enhanced support

• Future product updates

Pair with Aria

™

for Home App

for remote control and

advanced features

Rev.B 10/23 AR122ES2

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be

followed to reduce the risk of re, electrical shock, injury to persons and hyperthermia:

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW

THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

Plug heaters directly into a 120v wall outlet/receptacle only. Never use with an extension cord. Do not plug heater into any other cord. Plug

heaters directly into a 120v wall outlet/receptacle only. Never use with an extension cord. Do not plug heater into any other cord connected

device, such as a power strip, surge protector, multiple outlet adapter, cord reel or outlet-type air freshener. The use of such devices may create a

re hazard. Do not plug multiple devices in the same outlet or on same circuit as heater.

Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that heater plug ts tightly into outlet before each use. During use,

check to make certain the heater plug is not overheating. If necessary have a qualied electrician check and/or replace the wall outlet. Do not use

this heater with any solid state speed control devices.

Make certain that the power source conforms to the electrical requirements of the heater.

Extreme caution is necessary when any heater is used by or near children or invalids. The heater should not be left operating unattended. Never

leave children unattended when the heater is on or plugged in.

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to t in a

polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not

attempt to defeat this safety feature.

Do not use the heater in areas where gasoline, paint, or ammable liquids are used or stored. Do not use heater in locations where ammable or

explosive chemicals are stored, or in wet atmospheres.

Do not operate any heater with a damaged cord or plug or after the heater malfunctions, or has been dropped or damaged in any manner. To

disconnect heater, turn the heater off then remove the plug from the outlet.

Always unplug heater when not in use. Unplug power cord before servicing or moving the heater.

Do not insert or allow ngers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, re, or damage the

heater. Do not block or tamper with the heater in any manner while it is in operation.

Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not

depend on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.

Hyperthermia can result in death. Symptoms of hyperthermia include high body temperature, headache, nausea, vomiting, tiredness, dizziness,

fainting, and rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off the heater and seek medical attention.

To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave product running unattended in a conned space around

infants, or individuals with reducedphysical, sensory, or mental capabilities.

WARNING

• Always unplug heater when not in use. Unplug power cord before servicing or moving the heater.

• Do not insert or allow ngers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, re, or damage the

heater. Do not block or tamper with the heater in any manner while it is in operation.

• Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend

on the on/off switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord.

• Always place the heater on a stable, at, level surface when operating, to avoid the chance of the heater overturning. Locate the power cord so the

heater or other objects are not resting on it. Do not run power cord under carpeting. Do not cover power cord with throw rugs, runners, or similar

coverings as this may cause cord to overheat. Arrange power cord away from room trafc and where

it will not be tripped over.

• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this heater. Keep

combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 M) from the front of the heater and keep

them at least 1 foot (0.3 M) from the sides and rear.

• This heater is not intended for use in wet or damp locations. This heater is not intended for use in bathrooms, laundry areas and similar indoor

locations. Never locate a heater where it may fall into a bathtub or other water container.

• Do not use heater outdoors.

• This heater is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are conned. Please refer to

national electric code (nec) article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural

buildings. This heater does not meet the requirements of nec article 547-7 (2008).

• This heater is not suitable for use in hazardous locations. Please refer to national electric code (nec) article 500 or applicable state or local codes or

standards relating to electrical requirements for hazardous locations. This heater does not meet the requirements of

nec article 500 (2008).

• Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this heater. If this occurs, move the heater

to another location.

• Keep heater remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the heater.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes and modications

made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined