Lazer Urbanize MIPS Manual

Lazer Ikke kategoriseret Urbanize MIPS

Læs gratis den danske manual til Lazer Urbanize MIPS (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Lazer Urbanize MIPS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

1. How to use the rechargeable rear LED light

For a video guide to help with the following steps please

go to the following URL and click on how to videos:

www.youtube.com/user/LazerSport

URBANI Z E

This LED complies with Part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

The Lazer Urbanize comes with a

rechargeable rear LED light which is

designed to t perfectly in the rear

of the helmet.

1) To install in the helmet, simply align

the LED light with the rear hole. First

push the top in and then the bottom

as shown in diagram 1A.

2) To turn the light on, simply short

press the logo on the front of the light.

To cycle between the light modes short

press the same button. To turn of the

light cycle through all light modes until

the light is o.

Light modes:

1. Constant

Run time 8 hours

2. Flashing

Run time 26 hours

3. Pulsing

Run time 10 hours

4. O

1A)

2. How to recharge the rear LED light

The LED light in the Lazer Urbanize

will need to be charged before use.

After approximately 8 hours of use

on constant mode you will need to

recharge your battery.

To do this you will need to remove

it from the helmet.

1. Reach into the helmet, push the

head basket away slightly and push

the light out of the back of the helmet

as shown in diagram 2A.

3. Now using the cable provided,

plug the battery in to a standard 5V

USB power source (smartphone

charger, computer USB port) of a

renowned manufacturer. Charge for

approximately 2 hours to fully charge

the light. During charging time, the

battery signal led will turn solid red and

when it is 100% charged, the charging

LED will go out. Feel free to charge

work while your helmet is

locked to you bike using

lock hole.

URBANI Z E

Produkt Specifikationer

Mærke:	Lazer
Kategori:	Ikke kategoriseret
Model:	Urbanize MIPS
Antal pr. pakke:	1 stk
Materiale:	Nylon, Polycarbonate (PC)
LED-baggrundsbelysning:	Ja
Lukketype:	Fidlock magnetisk spænde
Køn:	Unisex
Ventilation:	Ja
Produktets hovedfarve:	Gul
Forbrugeraldergruppe:	Voksen
Aktivitet:	Landevejscykling
Sportshovedbeklædning type:	Hjelm
Hjelmvisir:	Ja
Antal ventilationshuller:	6
Beskyttelsesskum materiale:	Udvidet polystyren (EPS)
Justerbar pasform:	Ja
Aftagelig visir:	Ja
Beskyttelsesbrand specifikke funktioner:	MIPS