LC-Power LC-DOCK-U3-II Manual

LC-Power Vugge/dockingstation LC-DOCK-U3-II

Læs gratis den danske manual til LC-Power LC-DOCK-U3-II (3 sider) i kategorien Vugge/dockingstation. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om LC-Power LC-DOCK-U3-II, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
Installation guide
LC-DOCK-U3-II - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Included in delivery
● USB 3.0 dual bay docking station
● USB 3.0 cable
● Power adapter
● Installation guide
3. Information – please read carefully before using the product
We strongly advise that you make a backup of your original data before commencing the cloning process
to avoid any data loss in case of a power failure during the cloning process. LC-Power cannot accept the
responsibility for the loss of data or the misuse of the device. Please also check the content of the
package before commencing with the use of the device.
Minimum system requirements
- Intel Pentium II 50MHz compatible or Mac G3 processor or higher
- Microsoft Windows 2000/XP/Vista/7/8/10, Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3 or higher
- Computer supporting USB 3.0
Page 1
Product overview
1. Hardware clone button
3. HDD B bay (Target drive bay)
5. Cloning status LEDs
7. Power socket (input DC 12V/3A)
2. Main features
Supports 2,5” & 3,5” SATA HDDs/SSDs
2,5” up to 1TB, 3,5” up to 4TB
Supports hardware cloning
USB 3.0 output interface
Easy installation, plug & play and
hot- swappable
Including LED indicator for working status
2. HDD A bay (Source drive bay)
4. HDD A & B LEDs
6. USB 3.0 port
8. Power switch
Installation guide
LC-DOCK-U3-II - USB 3.0 Dual Bay Docking Station for 2x 2,5”/3,5” SATA HDDs/SSDs
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
4. Formatting a hard disk drive
If you are using new/unformatted hard disk drives, you will first need to format and partition the drives
before your operating system will recognize them. Please refer to the documentation included with your
hard disk drive and/or operating system for more information about correctly formatting a hard drive.
5. Docking station operation
The dual bay docking station primarily functions as a 2-bay docking station that allows you to easily
connect up to two hard disk drives to your computer through a single USB 3.0 connection.
1. Before your power on and use the docking station, please insert your SATA hard disk drive(s) into the
HDD A bay and/or HDD B bay. Be sure that the hard disk drives’ SATA connectors align with the SATA
connectors inside the HDD bays.
2. Use the provided USB 3.0 cable to connect the docking station with a USB port on your computer.
3. Press the power button located on the rear side of the docking station. The LED indicator will light up
and the hard disk drives will be powered up.
4. Your computer will automatically detect the newly connected device and drives. It may need one to
two minutes to install the necessary drivers. The docking station uses drivers that are already built
into your operating system. Additional drivers are not required.
5. Once the computer has recognized the drives, they will show up under “Computer” (Windows) or on
your desktop (Mac OS X).
Note : Do not remove the hard disk drives from the docking station or disconnect the docking
station from the USB port of your computer while copying files to or from the device or while
files or applications stored on the hard disk drive are in use. Otherwise you are in danger of a
loss of data!
6. Hardware clone function (hard disk drive duplication)
To successfully use the clone function, the capacity of the target hard disk drive must be equal to or larger
than the capacity of the source hard disk drive. Please note that data cannot be cloned to a hard disk
drive with a smaller capacity than the original source hard disk drive.
Hardware clone mode
Please use the one button cloning feature (from source hard disk drive to target hard disk drive) without
connecting the docking station to a computer.
Page 2

Produkt Specifikationer

Mærke: LC-Power
Kategori: Vugge/dockingstation
Model: LC-DOCK-U3-II

Har du brug for hjælp?

Hvis du har brug for hjælp til LC-Power LC-DOCK-U3-II stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vugge/dockingstation LC-Power Manualer

LC-Power

LC-Power LC-DOCK-U3-III Manual

11 August 2024
LC-Power

LC-Power LC-DOCK-U3-II Manual

9 August 2024

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer

Bigben

Bigben CBLNEONFLAMS Manual

31 Marts 2025
Crestron

Crestron TSR-310-DS Manual

26 Marts 2025
Havit

Havit SK900BT Manual

12 Marts 2025
LogiLink

LogiLink UA0410 Manual

10 Marts 2025
Alogic

Alogic DX2 Manual

10 Februar 2025
Manhattan

Manhattan 190398 Manual

2 Februar 2025
Magnavox

Magnavox MMA3645 Manual

7 Januar 2025
Magnavox

Magnavox MMA3639 Manual

7 Januar 2025
BenQ

BenQ beCreatus GR10 Manual

3 Januar 2025
IOPLEE

IOPLEE IOPEXTSPKER405G Manual

2 Januar 2025