LG AMNQ18GSKC0 Manual
LG
Aircondition
AMNQ18GSKC0
Læs nedenfor 📖 manual på dansk for LG AMNQ18GSKC0 (36 sider) i kategorien Aircondition. Denne guide var nyttig for 14 personer og blev bedømt med 4.7 stjerner i gennemsnit af 7.5 brugere
Side 1/36
EN ISHGL
OWNER'S MANUAL
AIR
CONDITIONER
Read this owner's manual thoroughly before operating the appliance and
keep it handy for reference at all times.
the original manual from www.lg.com.
TYPE : WALL MOUNTED
Original instruction
www.lg.com
Copyright © 2018-2021 LG Electronics Inc. All Rights Reserved.
MFL63260230
Rev.04_051821
*MFL63260230*
TABLE OF CONTENTS
This manual is produced for a group of products
and may contain images or content different from
the model you purchased.
This manual is subject to revision by the
manufacturer.
SA Y IN NS ....................................... 3FET ST TIORUC
IMPORTANT SAFETY INSTRUCTIONS ................................................. 4
OPERATION ............................................................. 9
Notes for Operation ................................................................................. 9
Parts and Functions................................................................................. 9
Wireless Remote Control....................................................................... 10
Restarting the Air Conditioner Automatically ......................................... 15
Using the Mode Function....................................................................... 15
Using the Jet Mode Function ................................................................. 17
Using the Fan Speed Function .............................................................. 17
Using the Air Flow Direction Function.................................................... 18
Setting the On/Off Timer ........................................................................ 18
Using the Sleep Function(Optional)....................................................... 19
Using the Simple Timer Function(Optional) ........................................... 20
Using the Energy Display Function(Optional)........................................ 20
Using the Light Off Function(Optional) .................................................. 21
Using the Comfort Air Function(Optional) .............................................. 21
Using the Energy Control Function(Optional) ........................................ 22
Using Special Functions ........................................................................ 23
Smart Appliance Connectivity ................................................................ 24
S F NS ............................................. 25 MART UNCTIO
Using LG ThinQ Application ................................................................. 25
MA NANCINTE E ...................................................... 28
Clean the Air Filter ................................................................................. 30
TRO H NG ........................................... 31UBLES OOTI
3
EN HGLIS
SAFETY INSTRUCTIONS
The following safety guidelines are intended to prevent unforeseen risks or
damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described
below.
This symbol is displayed to the indicate matters and operations that
can cause risk. Read the part with this symbol carefully and follow the
instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can cause
serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can cause the
minor injury or damage to the product.
WARNING
to persons when using this product, follow basic precautions, including the
following:
Children in the Household
T hi appliances is no in ended or use byt t f per ons (in luding children) wis c th ced redu
ph ical sen ory orys , s men al capabili ies ort t , lac perienk f o ex ce and nowledge k ,
unles he have been given supervis t y sion or ins ruc ion con t t cerning use o he f t
appliance by a person responsible or heir f t safety. s sChildren hould be upervis o ed t
en ure ha hey dos t t t no play wit th the appliance .
For use in Australia :
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
4
IMPORTANT SAFETY INSTRUCTIONS
WARNING
to persons when using this product, follow basic precautions, including the
following:
Installation
●
Do not install the air conditioner on an unstable surface or in a place where
there is danger of it falling.
●
Contact an authorized service center when installing or relocating the air
conditioner.
●
Install the panel and the cover of the control box safely.
●
quids or gases
such as gasoline, propane, paint thinner, etc., are stored.
●
Make sure that the pipe and the power cable connecting the indoor and outdoor
units are not pulled too tight when installing the air conditioner.
●
Use standard circuit breaker and fuse that conform to the rating of the air
conditioner.
●
refrigerant.
●
air; using
●
The indoor/outdoor wiring connections must be secured tightly, and the cable
should be routed properly so that there is no force pulling the cable from the
connection terminals. Improper or loose connections can cause heat generation
●
Install dedicated electric outlet and circuit breaker before using the air
conditioner.
●
Do not connect the ground wire to a gas pipe, a lightning rod, or a telephone
ground wire.
●
This appliance incorporates an earth connection for functional purposes only.
5
EN HGLIS
Operation
●Be sure to use only those parts listed in the service parts list. Never attempt to
modify the equipment.
●Make sure that children do not climb on or hit the outdoor unit.
●Dispose of the batteries in a place where there is no danger of
●
●Cut off the power supply if there is any noise, smell, or smoke coming from the
air conditioner.
●thinner near
the air conditioner.
●Contact an authorized service center when the air conditioner is submerged by
●Do not use the air conditioner for an extended period time in a small place
without proper ventilation.
●In the event of a gas leak (such as Freon, propane gas, LP gas, etc.) ventilate
●To clean the interior, contact an authorized service center or dealer. Using harsh
detergents may cause corrosion or damage to the unit.
● heating appliance
such as a heater are used simultaneously.
●
●Do not insert hands or other objects through the air inlet or outlet while the air
conditioner is operating.
●Make sure that the power cable is neither dirty, loose, nor broken.
●Never touch, operate, or repair the air conditioner with wet hands.
●Do not place any objects on the power cable.
●Do not place a heater or other heating appliances near the power cable.
●Do not modify or extend the power cable. Scratches or peeling insulation on the
replaced.
●Cut off the power supply immediately in the event of a blackout or a
thunderstorm.
●Take care to ensure that power cable could not be pulled out or damaged during
operation.
●Do not touch refrigerant pipe or water pipe or any internal parts while the unit is
operation or immediately after operation.
6
Maintenance
●Do not clean the appliance by spraying water directly onto the product.
●Before cleaning or performing maintenance, disconnect the power supply and
wait until the fan stops.
Technical Safety
●Installation or repairs made by unauthorized persons can pose hazards to you
and others.
●The information contained in the manual is intended for use by
service technician who is familiar with the safety procedures and equipped with
the proper tools and test instruments.
●Failure to read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
●The appliance shall be installed in accordance with national wiring regulations.
●When the power cord is to be replaced, the replacement work shall be
performed by authorized personnel using only genuine replacement parts.
●This appliance must be properly grounded to minimize risk of electric shock.
●Do not cut or remove the grounding prong from the power plug.
●Attaching the adapter ground terminal to the wall receptacle cover screw does
not ground the appliance unless the cover screw is metal, uninsulated, and the
wall receptacle is grounded through house wiring.
●If you have any doubt whether the air conditioner is properly grounded, have the
●The refrigerant and insulation blowing gas used in the appliance require special
disposal procedures. Consult a service agent or a similarly qua
before disposing of them.
●If the supply cord is damaged, it must be replaced by the manufacturer or its
hazard.
7
EN HGLIS
CAUTION
To reduce the risk of minor injury to persons, malfunction, or damage to
the product or property when using this product, follow basic precautions,
including the following:
Installation
●
Do not install the air conditioner in an area where it is directly exposed to sea
wind(salt spray).
●
Install the drain hose properly for the smooth drainage of water condensation.
●
Exercise caution when unpacking or installing the air conditioner.
●
Do not touch the leaking refrigerant during installation or repair.
●
Transport the air conditioner with two or more people or use a forklift.
●
Install the outdoor unit such that it is protected from direct sunlight. Do not
place the indoor unit in a place where it is directly exposed to sunlight via the
windows.
●
Safely dispose of packing materials such as screws, nails or batteries using
proper packaging after installation or repair.
●
Install the air conditioner in a place where the noise from the outdoor unit or the
exhaust fumes will not inconvenience the neighbors. Failure to do so may result
Operation
●
Remove the batteries if the remote control is not to be used for an extended
period of time.
●
conditioner.
●
Be sure to check if there is a refrigerant leak after installing or repairing the air
conditioner.
●
Do not place any object on the air conditioner.
●
Never mix different types of batteries, or old and new batteries for the remote
control.
●
Do not let the air conditioner run for a long time when humidity is very high or
when a door or a window has been left open.
●
If anyone other than a licensed Professional installs, repairs,
or alters LG Electronics Air Conditioning Products, the warranty is voided.
- All costs associated with repair are then the full responsibility of the owner.
●
Do not install the unit in potentially explosive atmospheres.
8
●
ttery. If your clothes
●
Do not expose people, animals, or plants to the cold or hot wind from the air
conditioner for extended periods of time.
●
thoroughly and consult a doctor.
●
Do not drink the water drained from the air conditioner.
●
Do not use the product for special purposes, such as preserving foods, works
of art, and etc. It is an air conditioner for consumer purposes, not a precision
refrigeration system. There is risk of damage or loss of property.
●
Do not recharge or disassemble the batteries.
Maintenance
●
Never touch the metal parts of the air conditioner when removin
●
Use a sturdy stool or ladder when cleaning, maintaining, or repairing the air
conditioner at a height.
●
Never use strong cleaning agents or solvents when cleaning the air conditioner
or spray water. Use a smooth cloth.
9
EN HGLIS
OPERATION
Notes for Operation
Suggestion for Energy Saving
●Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.
●Block sunlight with blinds or curtains while you are operating the air conditioner.
●Keep doors or windows closed tightly while you are operating the air conditioner.
●.
●Speed up the fan to cool or warm indoor air quickly, within a short period of time.
●Open windows regularly for ventilation. The indoor air quality may deteriorate if the air conditioner is used for
long durations.
●
weaken the cooling / dehumidifying functions.
Parts and Functions
Indoor Unit Outdoor Unit
1
Air Filter
2
Air Intake
3
Front Cover
4
On/Off Button
5
6
7
Air Outlet
1
Air Intake Vents
2
Air Outlet Vents
NOTE
●The number and location of operation lamps may vary according to the model of the air conditioner.
●The feature may be changed according to the type of model.
10
Wireless Remote Control
Inserting Batteries
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
1Remove the battery cover.
2Insert the new batteries and make sure that the
+ and - terminals of the batteries are installed
correctly.
Installing the Remote Control Holder
To protect the remote control, install the holder where
there is no direct sunlight.
1Choose a safe and easily accessible location.
2screwdriver.
Operating method
Point the remote control towards the signal receiver
at the right side of the air conditioner to operate it.
NOTE
●The remote control may operate other electronic
devices if it is directed towards them. Make sure to
point the remote control towards the air conditioner
signal receiver.
●For proper operation, use a soft cloth to clean the
signal transmitter and receiver.
●In case of a function not provided in the product,
no buzzer sound occurs from the product when a
button for such function on the remote control is
pressed except for Air Flow Direction(
SWING
), Energy
Display(
kW [3 s]
).
11
EN HGLIS
Setting the Current Time
1Insert batteries.
●The icon below blinks at the bottom of the
display screen.
2Press or button to select the minutes.
3Press SET/CANCEL
NOTE
●The On/Off Timer is available after setting the
current time.
Using the °C/°F Conversion
Function(Optional)
This function changes unit between °C and °F.
●Press and hold
[5 s]
SWING
button about 5 seconds.
Operating the Air Conditioner
Without the Remote Control
You can use the button of the indoor unit to ON/OFF
operate the air conditioner when the remote control is
unavailable.
1Open the front cover (Type1) or horizontal
vane(Type2).
2Press the button.ON/OFF
Type1
ON/OFF
Type2
ON/OFF
NOTE
●The stepping motor may be broken, if the horizontal
vane opens rapidly.
●The fan speed is set to high.
●The feature may be changed according to the type
of model.
●The temperature cannot be altered when using this
emergency On/Off button.
●For cooling & heating models, the temperature is
set from 22 °C to 24 °C.
12
Using Wireless Remote Control
You can operate the air conditioner more conveniently with the remote control.
SWING
kW [3 s]
℃↔℉ [5 s]
DIAGNOSIS [5 s]
SWING
SET UP
ROOM
TEMP
JET
MODE
MODE
TEMP
FAN
SPEED
FUNC.
TIMER CANCEL
SET
CANCEL
*
*
1
2
*
RESET
NOTE
• buttons may be changed according to the type of model.
•When connected to the Multi Outdoor unit, the Energy Display, Energy Control,
Silent and Smart Diagnosis function may not be supported.
To select the heating mode.
Button
Display
Screen
Description
-To turn on/off the air conditioner.
To adjust the desired room temperature in cooling,
heating or auto changeover mode.
MODE
To select the cooling mode.
To select the
To select the fan mode.
To select the auto changeover/auto operation mode.
JET
MODE
To change room temperature quickly.
FAN
SPEED
To adjust the fan speed.
SWING
SWING
direction vertically or horizontally.
*
•Heating mode not operate to cooling model
13
EN HGLIS
SWING
kW [3 s]
℃↔℉ [5 s]
DIAGNOSIS [5 s]
SWING
SET UP
ROOM
TEMP
JET
MODE
MODE
TEMP
FAN
SPEED
FUNC.
TIMER CANCEL
SET
CANCEL
*
*
1
2
*
RESET
Button
Display
Screen
Description
TIMER
To turn on/off air conditioner automatically at desired
time.
SET/
CANCEL -To set/cancel the special functions and timer.
CANCEL
-To cancel the timer settings.
-To adjust time.
*LIGHT
OFF -To set the brightness of the display on the indoor unit.
ROOM
TEMP To display the room temperature.
°C↔°F[5 s] To change unit between °C and °F.
*COMFORT
AIR
*kW[3 s] -To set whether or not to display information regarding
energy.
*ENERGY
CTRL To bring the effect of the power saving.
*DIAGNOSIS
[5 s] -To conveniently check maintenance information of
a product.
NOTE
• buttons may be changed according to the type of model.
•When connected to the Multi Outdoor unit, the Energy Display, Energy Control,
Silent and Smart Diagnosis function may not be supported.
*
•Heating mode not operate to cooling model
14
SWING
kW [3 s]
℃↔℉ [5 s]
DIAGNOSIS [ 5 s]
SWING
SET UP
ROOM
TEMP
JET
MODE
MODE
TEMP
FAN
SPEED
FUNC.
TIMER CANCEL
SET
CANCEL
*
*
1
2
*
RESET
Button
Display
Screen
Description
FUNC.
To purify the air by removing particles that enters the
indoor unit.
To reduce noise from outdoor units.
To remove moisture generated inside the indoor unit.
RESET
-To Initialize the remote control settings.
NOTE
•
Some functions may not be supported, depending on the model.
•
* buttons may be changed according to the type of model.
•
Press the button to operate the selected .SET/CANCEL FUNC
15
EN HGLIS
Restarting the Air Conditioner
Automatically
When the air conditioner is turned on again after
a power failure, this function restores the previous
settings.
Disabling Auto Restart
1
Open the front cover (Type1) or horizontal
vane(Type2).
2
Press the button and hold it for 6 ON/OFF
seconds, then The unit will beep twice and the
lamp will blink twice 4 times.
●To re-enable the function, press the ON/OFF
button and hold it for 6 seconds. The unit will
beep twice and the lamp will blink 4 times.
Type1
ON/OFF
Type2
ON/OFF
NOTE
●The feature may be changed according to the type
of model.
●If you press and hold the button for 3 – 5 ON/OFF
seconds, instead of 6 seconds, the unit will switch
to the test operation. In the test operation, the unit
blows out strong cooling air for 18 minutes and
then returns to factory default settings.
Using the Mode Function
This function allows you to select the desired
function.
Cooling & Heating Model
Cooling Mode
Auto Changeover Mode
Dehumidification Mode
Heating Mode
Fan Mode
Cooling Mode
1
Turn the appliance on.
2
Press button repeatedly to select the MODE
Cooling Mode.
• is displayed on the display screen.
3
Press or button to set the desired
temperature.
NOTE
●
Heating mode not operate to cooling model
16
This mode removes excess moisture from a highly
humid environment or during the rainy season,
in order to prevent molding from setting in. This
mode adjusts the room temperature and the fan
speed automatically to maintain the optimal level of
humidity.
1
Turn the appliance on.
2
Press button repeatedly to select the MODE
•
is displayed on the display screen.
NOTE
•
In this mode you cannot adjust the room
temperature, it is adjusted automatically.
•
The room temperature is not displayed on the
display screen.
Fan Mode
This mode only circulates the indoor air without
changing the room temperature.
1
Turn the appliance on.
2
Press button repeatedly to select the Fan MODE
Mode.
•
is displayed on the display screen.
3
Press FAN SPEED button to adjust the fan
speed.
Multi Model
In this operation mode, the system is automatically
operated by the electronic controls.
1
Turn the appliance on.
2
Press button repeatedly to select the Auto MODE
Operation.
•
is displayed on the display screen.
3
Press or button to set the desired
temperature.
4
Press FAN SPEED button to adjust the fan
speed.
Heating Mode
1Turn the appliance on.
2Press button repeatedly to select the MODE
Heating Mode.
•
is displayed on the display screen.
3Press or button to set the desired
temperature.
NOTE
●
Heating mode not operate to cooling model
17
EN HGLIS
Using the Jet Mode Function
Changing Room Temperature
Quickly
This function allows you to cool indoor air quickly
during the summer or warm it quickly during winter.
●
The Jet Mode function is available with Cooling,
1
Turn the appliance on.
2
Press button repeatedly to select the MODE
desired mode.
3
Press button.JET MODE
●
is displayed on the display screen.
NOTE
●
Jet Heating Mode is not available on some models.
●
In Jet Cooling Mode, strong air blows out at
temperature of 18 °C for 30 minutes.
●
In Jet Heating Mode, strong air blows out at
temperature of 30 °C for 30 minutes.
●
This function may operate differently from the
remote control display.
Using the Fan Speed
Function
Unth F aSpee Fun ctionsi g e n d
Adjusting the Fan Speed
●
Press FAN SPEED button repeatedly to adjust the
fan speed.
Display Screen Speed
High
Medium - High
Medium
Medium - Low
Low
- Natural Wind
NOTE
●
The fan speed of natural air adjusts automatically.
→ →
●
The fan speed icons are displayed on some indoor
units.
→ → → →
Indoor unit display is displayed only 5 seconds and
return to the setting temperature on some models.
18
Using the Air Flow Direction
Function
vertically (horizontally).
●Press
SWING
(
SWING
) button repeatedly and select the
desired direction.
-Select ( ) to adjust the direction of the air
NOTE
●
be supported, depending on the model.
●
product failure.
●If you restart the air conditioner, it starts to operate
the remote control. When this occurs, press
SWING
or
SWING
again.
●This function may operate differently from the
remote control display.
Setting the On/Off Timer
This function sets the air conditioner to turn on/off
automatically at desired time.
Setting the On Timer
1Press
TIMER
button repeatedly.
●The icon below blinks at the bottom of the
display screen.
2Press or button to select the minutes.
3Press SET/CANCEL
●After setting the timer, current time and icon
are displayed on the display screen indicating
that the desired time is set.
Canceling the On Timer
1Press
TIMER
button repeatedly.
●The icon below blinks at the bottom of the
display screen.
2Press button to cancel the setting.SET/CANCEL
19
EN HGLIS
Setting the Off Timer
1Press
TIMER
button repeatedly.
●The icon below blinks at the bottom of the
display screen.
2
Press or button to select the minutes.
3
Press SET/CANCEL
●After setting the timer, current time and icon
are displayed on the display screen indicating
that the desired time is set.
NOTE
●This function is disabled when you set Simple
Timer.
Canceling the Off Timer
1
Press
TIMER
button repeatedly.
●The icon below blinks at the bottom of the
display screen.
2
Press button to cancel the setting.SET/CANCEL
Canceling the Timer Setting
●Press
CANCEL
button to cancel all timer settings.
Using the Sleep
Function(Optional)
This function turns off the air conditioner
automatically when you go to sleep.
1
Turn the appliance on.
2
Press
TIMER
button repeatedly.
●The icon below blinks at the bottom of the
display screen.
3
Press or button to select the hour (up
to 7 hours).
4
Press SET/CANCEL
● is displayed on the display screen.
NOTE
● is displayed on some indoor units.
●Indoor unit display is displayed from 1H to 7H,
which is displayed only 5 seconds and then return
to the setting temperature.
●
temperature increases by 1 °C after 30 minutes
and additional 1 °C after another 30 minutes for a
more comfortable sleep.
●The temperature increases up to 2 °C from the
preset temperature.
●Although the remark for fan speed on the display
screen may be changed, the fan speed is adjusted
automatically.
20
Using the Simple Timer
Function(Optional)
This function turns off the air conditioner
automatically when you go to sleep.
1
Turn the appliance on.
2
Press
TIMER
button repeatedly.
●
The icon below blinks at the bottom of the
display screen.
3
Press or button to select the hour (up
to 7 hours).
4
Press SET/CANCEL
●
is displayed on the display screen.
NOTE
●
This function is disabled when you set Off Timer.
Using the Energy Display
Function(Optional)
This function displays the amount of electricity
generated on the indoor display as the product
operates.
Display the Current Energy Usage
1
Turn the appliance on.
2
Press
kW [3 s]
button and hold it about 3 seconds.
●
The instantaneous power consumption( )
is displayed for a while on some indoor units.
NOTE
●
It is not displayed on the wireless remote control.
●
The unit of the displayed value is kW.
●
If it is more than 99 kW, which is the range of
expression, maintain it as 99 kW.
●
Display wattage under 10 kW with 0.1 kW unit, and
display one over 10 kW with 1 kW unit.
●
The actual power may differ from the power
displayed.
●
When connected to the Multi Outdoor unit, this
function may not be supported.
21
EN HGLIS
Using the Light Off
Function(Optional)
Display Screen Brightness
You can set the brightness of the indoor unit display
screen.
●Press button.LIGHT OFF
Using the Comfort Air
Function(Optional)
Comfort Vane Operation
This function conveniently sets the vane to a preset
directly onto the occupants in the room.
1Turn the appliance on.
2Press COMFORT AIR button repeatedly and
select the desired direction.
● or is displayed on the display screen.
NOTE
● or is displayed on some indoor units.
●This function is disabled when you press or MODE
JET MODE button.
●This function is disabled and auto swing of vertical
direction is set up when you press
[5 s]
SWING
button.
●When this function is off, the horizontal vane
operates automatically depending on the set mode.
22
Using the Energy Control
Function(Optional)
1
Turn the appliance on.
2
Press button.ENERGY CTRL
●
Press button repeatedly to ENERGY CTRL
select each step.
NOTE
●
1 step : The power Input is decreased by 20%
compared to rated power input.
-
is displayed on the display screen.
●
2 step : The power Input is decreased by 40%
compared to rated power input.
-
is displayed on the display screen.
●
3 step(Optional) : The power Input is decreased by
60% compared to rated power input.
-
is displayed on the display screen.
●
(1 step), (2 step) is displayed on some indoor
units.
●
This function is available with Cooling Mode.
●
Capacity may decrease when Energy Control mode
is selected.
●
Desired temperature is displayed about 5 seconds
if you press FAN SPEED, or button.
●
Room temperature is displayed about 5 seconds if
you press button.ROOM TEMP
●
When connected to the Multi Outdoor unit, this
function may not be supported.
Using Special Functions
1
Turn the appliance on.
2
Press button repeatedly to select the FUNC
desired function.
3
Press SET/CANCEL
23
EN HGLIS
Display
Screen Description
To purify the air by removing
particles that enters the indoor unit.
To reduce noise from outdoor units.
To remove moisture generated
inside the indoor unit.
NOTE
●
Some functions may not be supported, depending
on the model.
●
Some functions may operate differently from the
remote control display.
Canceling Special Functions
1Press button repeatedly to select the FUNC
desired function.
2Press button to cancel the SET/CANCEL
function.
These functions supply clean and fresh air by ion
Function Display Description
Air
Purification
It removes
microscopic
contaminants
from the intake air
completely to supply
clean and fresh air.
NOTE
●
You can use this function without turning the air
conditioner on.
●
Both the plasma lamp and the cooling lamp light up
while Smoke Away/Plasma is in operation on some
models.
●
This function may operate differently from the
remote control display.
24
Using the Silent Function
This function prevents potential claims by neighbors,
reducing noise from outdoor units.
● is displayed on the display screen.
NOTE
●This function is disabled when you press or MODE
ENERGY CTRL JET MODE or button.
●This function is available with Cooling, Heating,
Auto Changeover, Auto Operation Mode.
●When connected to the Multi Outdoor unit, this
function may not be supported.
Using the Auto Clean Function
is generated inside the indoor unit. This function
removes such moisture.
● is displayed on the display screen.
NOTE
●Some buttons cannot be used while the Auto Clean
function is in operation.
●If you turn off the power, the fan operates for 30
minutes and cleans the inside of the indoor unit.
Smart Appliance Connectivity
Using the Wi-Fi Pairing
Function(Optional)
Once it is connected to the internet through a home
Wi-Fi network, you can control the appliance remotely
with the application for the smart phone.
●Press and hold the
kW [3 s]
and button JET MODE
simultaneously about 3 seconds.
NOTE
●It is not displayed on the wireless remote control.
●For more information, read manual in Wi-Fi
module.
25
EN HGLIS
SMART FUNCTIONS
Using LG ThinQ Application
Things to check before using LG
ThinQ
•For appliances with the or ThinQ logo
1Check the distance between the appliance
and the wireless router (Wi-Fi network).
•If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may
fail.
2Turn off the or Mobile data Cellular Data
on your smartphone.
3Connect your smartphone to the wireless
router.
NOTE
•To verify the Wi-Fi connection, check that
Wi-Fi icon on the control panel is lit.
•The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
•LG ThinQ is not responsible for any network
connection problems or any faults,
malfunctions, or errors caused by network
connection.
•If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
•The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
•The network connection may not work
properly depending on the Internet service
provider.
•The surrounding wireless environment can
make the wireless network service run slowly.
•The appliance cannot be registered due to
problems with the wireless signal
transmission. Unplug the appliance and wait
about a minute before trying again.
•If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
•The wireless network name (SSID) should be
a combination of English letters and numbers.
(Do not use special characters.)
•Smartphone user interface (UI) may vary
depending on the mobile operating system
(OS) and the manufacturer.
•If the security protocol of the router is set to
WEP, you may fail to set up the network.
Please change it to other security protocols
(WPA2 is recommended) and register the
product again.
26
Installing LG ThinQ
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a
smart phone. Follow instructions to download
and install the application.
Wi-Fi Function
•
For appliances with the or logoThinQ
Communicate with the appliance from a smart
phone using the convenient smart features.
Smart Diagnosis™
If you use the Smart Diagnosis function, you will
be provided with the useful information such as
a correct way of using the appliance based on
the pattern of use.
Settings
Allows you to set various options on the
appliance and in the application.
NOTE
•
If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the LG ThinQ
application and register it again.
•
The application is subject to change for
appliance improvement purposes without
notice to users.
•
Functions may vary by model.
RF Radiation Exposure Statement
•
This equipment shall be installed and used at
a minimum distance of 20 cm from the human
body.
Wireless LAN Module Specifications
Model LCW-003
Frequency
Range 2412 MHz - 2472 MHz
Output
Power(Max)
IEEE 802.11b:18.37 dBm
IEEE 802.11g:17.67 dBm
IEEE 802.11n:17.67 dBm
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit https://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as
the cost of media, shipping, and handling) upon
email request to opensource@lge.com. This
offer is valid for a period of three years after our
last shipment of this product. This offer is valid
to anyone in receipt of this information.
Model LCW-007
Frequency
Range 2412 MHz - 2472 MHz
Output
Power(Max)
IEEE 802.11b:17.59 dBm
IEEE 802.11g:17.39 dBm
IEEE 802.11n(HT20):16.64 dBm
IEEE 802.11n(HT40):17.05 dBm
27
EN HGLIS
Smart Diagnosis™ Using a Smart
Phone
•For appliances with the or logo
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails.
Smart Diagnosis™ can not be activated unless
the appliance is connected to power. If the
appliance is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis™.
NOTE
•Be sure to keep ambient noise to a minimum
or the phone may not correctly receive the
buzzer beeps from the indoor unit.
28
MAINTENANCE
WARNING
●Turn off the power and turn off the breaker (unplug the power cord) before you perform any maintenance; otherwise
it may cause electric shock.
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best
condition. Clean the product regularly to maintain optimal performance and to prevent possible breakdown.
●Dry the air conditioner in Fan mode for 3 to 4 hours and disconnect the power. There may be internal damage
if moisture is left in its components.
●Before using the air conditioner again, dry the inner components of the air conditioner in Fan mode for 3 to 4
hours. This will help to remove the odor generated from moisture.
Air Filter
●The feature may be changed according to the type of model.
29
EN HGLIS
Type Description Interval
Air filter Clean with a vacuum or hand wash. 2 weeks
Indoor unit
Clean the Indoor unit surface by using a soft, dry cloth. Regularly
Have a professional clean the condensate drain pan. Once a year
Have a professional clean the condensate drain pipe. Every 4 months
Replace the remote control batteries. Once a year
Outdoor unit
Have a professional clean the heat exchanger coils and
the panel vents. (Consult with technician.) Once a year
Have a professional clean the fan. Once a year
Have a professional clean the condensate drain pan. Once a year
Have a professional verify that all the fan assembly is
firmly tightened. Once a year
Clean the electric components with air. Once a year
NOTE
•Never use water that is higher than 40 °C when you clean the filters. It may cause deformation or
discoloration.
•Never use volatile substances when you clean the filters. They may damage the surface of the
product.
•Do not wash the 3M filter with water, because the filter can be damaged (Optional).
•Do not wash the Triple filter with water, because the filter can be damaged (Optional).
30
Clean the Air Filter
necessary.
NOTE
●
●
and other substance come into the indoor unit.
Type1
1Turn off the power and turn off the breaker
(unplug the power cord).
2Open the front cover.
●Lift up both sides of the cover slightly.
3slightly and remove them from the indoor unit.
4lukewarm water with neutral detergent.
5
6cover.
7Check the side of the front cover for correct
Type2
If you look at the indoor unit from above it, can
1Turn off the power and turn off the breaker
(unplug the power cord).
2
3Remove it from the indoor unit.
4lukewarm water with neutral detergent.
5
6cover.
7
8Check the side of the front cover for correct
31
EN HGLIS
TROUBLESHOOTING
Before Calling for Service
Please check the following before you contact the service center. If the problem persists, contact your local
service center.
Problem Possible Causes Corrective Action
The air conditioner
does not work
normally.
Burning smell and strange sounds
are coming from the unit.
●
Turn off the air conditioner, unplug the
power cable or disconnect the power
supply, and contact the service center.
Water leaks from the indoor unit even
when the humidity level is low.
The power cable is damaged or it is
generating excessive heat.
A switch, a circuit breaker (safety,
ground), or a fuse is not operated
properly.
The unit generates an error code from
its self-diagnosis.
The air conditioner
does not work.
The air conditioner is unplugged.
●
Check whether the power cord is plugged
into the outlet or the power isolators are
switched on.
A fuse exploded, or the power supply
is blocked.
●
Replace the fuse or check if the circuit
breaker has tripped.
A power failure has occurred.
●
Turn off the air conditioner when a power
failure occurs.
●
When the power is restored, wait 3 minutes,
and then turn on the air conditioner.
The voltage is too high or too low.
●
Check if the circuit breaker has tripped.
The air conditioner was turned off
automatically at a preset time.
●
Turn the air conditioner on.
The battery setting in the remote
controller is incorrect.
●
Make sure that the batteries are inserted
correctly in your remote controller.
●
If the batteries are placed correctly, but
the air conditioner still does not operate,
replace the batteries and try again.
33
EN HGLIS
Problem Possible Causes Corrective Action
The air outlet on
the indoor unit is
discharging mist.
The cooled air from the air conditioner
makes mist.
●
When the room temperature decreases,
this phenomenon will disappear
Water leaks from
the outdoor unit.
In the heating operations, condensed
water drops from the heat exchanger.
●
This symptom requires installing a drain
hose under the base pan. Contact the
installer.
There is noise or
vibration.
A clicking sound can be heard
when the unit starts or stops due to
movement of the reversing valve.
Creaking sound: The plastic parts of
the indoor unit creak when they shrink
or expand due to sudden temperature
changes.
Flowing or Blowing sound: This is
conditioner.
●
These are normal symptoms. The noise will
stop.
The indoor unit
gives off an odor.
Odors (such as cigarette smoke) may
be absorbed into the indoor unit and
●
If the smell does not disappear, you need
contact the service center to clean your
heat exchanger.
The air conditioner
does not emit warm
air.
When Heating Mode starts, the vane
is almost closed, and no air comes
out, even though the outdoor unit is
operating.
●
This symptom is normal. Please wait until
the unit has generated enough warm air to
blow through the indoor unit.
The outdoor unit is in Defrosting
Mode.
●
In Heating Mode, ice/frost is built up on the
coils when the outside temperature falls.
This function removes a layer of frost on the
minutes.
Outside temperature is too low.
●
The air conditioner
changes generated
When the air conditioner reaches
the desired temperature, the airflow
rate reduces in order to avoid
generating cool airflow during heating,
or to minimize energy consumption
and indoor humidity change during
cooling.
●
This symptom is normal.
airflow during
operation.
34
NOTE
●
Some functions may not be supported, depending on the model.
Problem Possible Causes Corrective Action
Your home appliance
and smartphone is
not connected to the
Wi-Fi network.
The password for the Wi-Fi
that you are trying to connect
to is incorrect.
•Find the Wi-Fi network connected to
your smartphone and remove it, then
register your appliance on LG ThinQ.
Mobile data for your
smartphone is turned on.
•Turn off the of your Mobile data
smartphone and register the appliance
using the Wi-Fi network.
The wireless network name
(SSID) is set incorrectly.
•The wireless network name (SSID)
should be a combination of English
letters and numbers. (Do not use
special characters.)
The router frequency is not 2.4
GHz.
•Only a 2.4 GHz router frequency is
supported. Set the wireless router to
2.4 GHz and connect the appliance to
the wireless router. To check the
router frequency, check with your
Internet service provider or the router
manufacturer.
The distance between the
appliance and the router is too
far.
•If the distance between the appliance
and the router is too far, the signal
may be weak and the connection may
not be configured correctly. Move the
location of the router so that it is
closer to the appliance.
35
EN HGLIS
Produkt Specifikationer
| Mærke: | LG |
| Kategori: | Aircondition |
| Model: | AMNQ18GSKC0 |
Har du brug for hjælp?
Hvis du har brug for hjælp til LG AMNQ18GSKC0 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Aircondition LG Manualer
20 Februar 2025
4 Januar 2025
4 Januar 2025
4 Januar 2025
4 Januar 2025
4 Januar 2025
4 Januar 2025
22 December 2024
22 December 2024
22 December 2024
Aircondition Manualer
- Aircondition Kaco
- Aircondition KDK
- Aircondition Westinghouse
- Aircondition Element
- Aircondition Electrolux
- Aircondition Russell Hobbs
- Aircondition Becken
- Aircondition Hitachi
- Aircondition Koldfront
- Aircondition Oregon Scientific
- Aircondition Danby
- Aircondition Commercial Cool
- Aircondition Hokkaido
- Aircondition Exquisit
- Aircondition Arctic King
Nyeste Aircondition Manualer
9 April 2025
9 April 2025
4 Marts 2025
28 Februar 2025
28 Februar 2025
28 Februar 2025
28 Februar 2025
28 Februar 2025
28 Februar 2025
28 Februar 2025