LG D8A0371EDF0 Manual

LG Lys D8A0371EDF0

Læs gratis den danske manual til LG D8A0371EDF0 (3 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 26 anmeldelser. Har du et spørgsmål om LG D8A0371EDF0, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

- 2 -- 1 -

LED DOWNLIGHT

Installation Manual

• Please read the 「Safety Precautions」 prior to install for your safety.

• This manual is intended to prevent product damage and protect the user’s safety.

•Violation of warnings may lead to serious injury or death.

• Violation of precautions may lead to light injury or product damage.

•Do not wipe the surface with inflammables, such as alcohol, benzene, and acetone.

•Do not use the device in places with corrosive gases.

•The color and the brightness of the lamp may differ even among the same model because the LED light source has "light dispersion".

Safety Precautions

warning

Turn power off before contact

of the product.

•Risk of electric shock.

Install a circuit breaker.

•Risk of fire and electric shock.

Use with proper rated voltage.

(less than ±10%)

•Risk of fire and product dam-

age.

Product’s power cables

Interior wiring of the building

1(87

1(871(87

55$

$$/

3(

/,9

/,9/,9(

(

((

1(875$/

/,9(

Wire connectors

Wire connectorsWire connectorsWire connectors

{c@}

If there is a ground wire, per-

form grounding work.

•Risk of electric shock.

Electric work must be per-

formed by a certified technician

according to the installation

manual.

•Inadequate power capacity and

faulty electric work may lead to

fire or electric shock.

Do not randomly connect the

power polarities.

•Risk of product damage and

accidents.

Techno logy

st ard and

about electric

faci

litie s

Do not install in areas that have

risks of flooding.

•Risk of electric shock and fire.

Do not use the product if impu-

rities are present in the product

or if the product is submerged.

•Risk of accidents such as elec-

tric shock and product damage.

Do not store in a humid area.

•Risk of product malfunctioning.

If the lamp turns off by itself, do

not disassemble the product.

Contact your local LGE sales

representative for repair.

•Risk of electric shock and prod-

uct malfunctioning.

Do not stare directly at the lamp

when turned on.

•Strong light may cause visual

impairment.

Do not expose the product to

water when cleaning it.

•Risk of fire and electric shock.

Do not use if the product has

been dropped or exposed to

shock.

•Risk of product malfunctioning.

Be careful not to apply exces-

sive force to the power cable.

•Otherwise, it may cause the de-

vice to drop or result in electric

shock.

Keep some distance between

the lamp and the object to be il-

luminated.

•

If the illumination distance is too

close or if the illumination is on a

material's surface, this may

cause discoloration or deforma-

tion of the object or cause fire.

Do not cover the device with

clothes or paper. Do not place it

near inflammables.

•Otherwise, it may cause mal-

function of the device or fire.

Do not disassemble or arbitrarily

remodel the product. Do not

use for underwater lighting pur-

poses. (Underwater landscape,

searchlight, fishing, events, etc.)

•Risk of fire and electric shocks.

Must fix the product properly on

the ceiling.

•Risk of product dropping and

causing injury to the user.

caution

MFL67404601

Installation

Dimming Terminal Connection

11Drill and prepare the ceiling so that it can

accommodate the product.

※ Refer to page 3 for product size. 2

22Connect the 3 product cables to the interior

wiring of the building. For wire connectors,

use standardized products.

※ The 4 Inch product is used for Single-

phase two-wire system. (Without P.E.)

33 Tuck up a spring of the product and then

hang it on the ceiling. 4

44Insert the power cable in such a way that the

power cable does not get tangled between

the ceiling surface and the product. 5

55 Sufficiently lift the product so that the spring

can be inserted on the other side.

66 Check to see if the product’s exterior sur-

face is installed on the ceiling so that there

is no gap between them. 7

77Turn the power switch on to verify that the

product is working properly.

※ When this luminaire is connected to branch

circuit, installation engineer must use the

connector that meets the glow-wire test of

650°C (in case of France, 850°C) or higher.

※

During the use of connector socket, if the power lineis

forced in, it may not be lighted due to defect contact.

-Connector Socket-

To dim the lamps, a compatible dimmer should be used.

The use of incompatible dimmers will result in damage to the products.

Before installing dimmers, verify the compatible dimmer list with your local LGE sales representative.

※ Wire dimming function is included. (0-10V)

※ Please use wire with designated thickness. (24-20AWG)

※ Be careful of the polarity for correct dimming control.

※ Maximum number of products to be connected to 1 dimming controller: 14

(Compatible dimmer: 5743 09(Legrand))

Pin No. Output Name

1 GND

2 0~10V

Make sure to turn off the main power switch off the installation space before connection.

Connect so that the colors of the 3 power cables match.

(LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW) power

Produkt Specifikationer

Mærke:	LG
Kategori:	Lys
Model:	D8A0371EDF0
Produktfarve:	Hvid
Produkttype:	Indbygget lysplade
Lampetype:	LED
Strømkilde type:	Vekselstrøm
Strålevinkel:	100 °
Pære levetid:	- t
Farvetemperatur (maks.):	3000 K
Dæmpbar:	Ja
Antal lyskilder:	1 pære(r )
Højdejustering:	Ingen
Rotation:	Ingen
Plafond form:	Rund
Velegnet til indendørsbrug:	Ja