LG FRS640D5F0B Manual

LG Lys FRS640D5F0B

Læs gratis den danske manual til LG FRS640D5F0B (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 81 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 41 anmeldelser. Har du et spørgsmål om LG FRS640D5F0B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

- 2 -

Interior wiring

of the building

Wire connectors

Product ’s

power cables

NEUTRA

NEUTRAL

LIV

LIVE

P.E

P.E.

NEUTRAL

LIVE

P.E.

Installation

Dimming Terminal Connection

1. T-BAR

• Make sure to turn off the main power switch of the installation space before connection.

• Connect so that the colors of the 3 power cables match. (LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)

1Drill and prepare the

ceiling so the hole is

smaller than the

product.

2Connect the 3 product

cables to the interior

wiring of the building.

For wire connectors,

use standardized

products.

3Rotate the connected

product by 20 degrees.

Then insert it into the

T-Bar insertion space.

• Make sure that all 4

sides of the product

match the T-Bar.

4Place the horizontal

product into the T-Bar. 5Ensure the inserted

product is horizontal.

Interior wiring

of the building

Wire connectors

Product ’s

power cables

NEUTRA

NEUTRAL

LIV

LIVE

P.E

P.E.

NEUTRAL

LIVE

P.E.

2. M-BAR

• Make sure to turn off the main power switch of the installation space before connection.

• Connect so that the colors of the 3 power cables match. (LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)

• Use woodscrews provided by LG Electronics.

(In case of a model of 620 M-Bar, Use silver colored screws if the ceiling tiles are thicker than 9.0t. If not, use black colored screws.)

1Drill and prepare the

ceiling so that the hole

is smaller than the

product.

2Connect the 3 product

cables to the interior

wiring of the building.

For wire connectors,

use standardized

products.

3Check the installation

location. 4Fix the product by using

woodscrews.

• Check to see that the

product is fixed into

place.

5Perform a lighting test

to see if the product is

working properly.

• After the installation is

complete, remove the

protective sheet.

6Once installation is complete, turn on the

power switch to check it is operating properly.

• After the installation is complete, remove the

protective sheet.

※During the use of connector socket, if the power line

is forced in, it may not be lighted due to defect

contact.

※When this luminaire is connected to branch circuit,

installation engineer must use the connector that meets

the glow-wire test of 650°C (in case of France, 850°C)

or higher.

-Connector Socket-

-Dimming Connector-

(O) (X)

※When each cable is inserted into the

dimming connector socket, the wire which

removes the covering must not come into

contact with the case.

To dim the lamps, a compatible dimmer should be used.

The use of incompatible dimmers will result in damage to the products.

Before installing dimmers, verify the compatible dimmer list with your local LGE sales representative.

※Wire dimming function is included. (0-10V)

※Please use wire with designated thickness. (24-20AWG)

※Be careful of the polarity for correct dimming control.

※ Maximum number of products to be connected to

1 dimming controller: 20 (Compatible dimmer:

ArteorTM Fluo Dimmer (Legrand Electric Ltd.),

AU-DSPLED (Aurora Ltd.))

※The function of dimming control may not be served depending on the product.

Pin No. Output Name

1 0~10V

2 GND

- 1 -

LED FLAT LIGHT

Installation Manual

• Please read the 「」Safety Precautions prior to install for your safety.

• This manual is intended to prevent product damage and protect the user’s safety.

• Violation of warnings may lead to serious injury or death.

Safety Precautions

WARNING

Turn power off before

contact of the product.

• Risk of electric shock.

Install a circuit breaker.

• Risk of fire and electric shock.

Use with proper rated

voltage. (less than ±10%)

• Risk of fire and product damage.

Perform grounding work.

• Risk of electric shock.

Electric work must be

performed by a certified

technician according to the

installation manual.

• Inadequate power capacity and

faulty electric work may lead to

fire or electric shock.

Do not randomly connect the

power polarities.

• Risk of product damage and

accidents.

Do not install in areas that

have risks of flooding.

• Risk of electric shock and fire.

Do not use the product if

impurities are present in the

product or if the product is

submerged.

• Risk of accidents such as electric

shock and product damage.

Do not store in a humid area.

• Risk of product malfunctioning.

If the lamp turns off by itself, do

not disassemble the product.

Contact your local LGE sales

representative for repair.

• Risk of electric shock and

product malfunctioning.

Do not stare directly at the

lamp when turned on.

• Strong light may cause visual

impairment.

Do not expose the product to

water when cleaning it.

• Risk of fire and electric shock.

Do not use if the product has

been dropped or exposed to

shock.

• Risk of product malfunctioning.

Must have at least two or

more people working during

installation.

• Risk of product dropping and

causing injury to the user.

Product is heavy. Use a

trolley when transporting the

product.

• Dropping the product may cause

product damage and

malfunction.

Do not install where it may

be exposed to direct

sunlight, humidity, or dust.

Do not clean the product with

inflammable substances

such as alcohol, benzene,

and acetone that may alter

the surface.

Do not install near potential

sources of fire or

inflammable objects, such as

paper or cloth.

• Risk of product malfunctioning

and accidents.

Do not disassemble or arbitrarily

remodel the product. Do not use for

underwater lighting purposes.

(Underwater landscape,

searchlight, fishing, events, etc.)

• Risk of fire and electric shocks.

Must fix the product properly

on the ceiling.

• Risk of product dropping and

causing injury to the user.

• Violation of precautions may lead to light injury or product damage.

CAUTION

MFL67703801

Produkt Specifikationer

Mærke:	LG
Kategori:	Lys
Model:	FRS640D5F0B

Har du brug for hjælp?

Hvis du har brug for hjælp til LG FRS640D5F0B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys LG Manualer

LG D4A0081EDF1 Manual

8 April 2024

LG T4B22BD5FEA Manual

17 Juni 2023

LG FRS640D5F0B Manual

24 December 2022

LG D4A0081EDF0 Manual

8 December 2022

LG FRS640D3F0B Manual

24 Oktober 2022

LG D4A0083EDF1 Manual

15 Oktober 2022

LG LD15X740P2B Manual

8 Oktober 2022

LG D8A0371EDF0 Manual

4 Oktober 2022

Lys Manualer

Nyeste Lys Manualer

VELVET Light 2 Manual

5 November 2025

Elation DMX Operator Manual

5 November 2025

GVM -CL100B Manual

5 November 2025

GVM -B100C Manual

5 November 2025

American DJ Encore Profile PRO Color Manual

5 November 2025

Geekoto LR-18 Soft Manual

4 November 2025

VELVET Power 2 Studio Manual

4 November 2025

American DJ Encore Profile Mini Color Manual

4 November 2025

Ledgo LE-60K Manual

4 November 2025

Elation Emulation Touch 2 Manual

4 November 2025