Liberty Garden 704 Manual

Liberty Garden Haveslange 704

Læs gratis den danske manual til Liberty Garden 704 (2 sider) i kategorien Haveslange. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Liberty Garden 704, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Liberty Garden Model #704

This hose reel must be mounted to a solid masonry wall or to wall studs

TIP: Remember to use the correct size and quantity of hardware to properly support the

total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.

Filled with water the additional weight can exceed 20 lbs. The mounting hardware must be

able to support the combined weight of the unit, garden hose, plus water.

13.5 in.

15.5 in.

16 in.

Width includes handle

21.5 in.

• Position and hold your hose reel against the brick

masonry wall at a convenient height. Mark the position of

each suspension hole on the wall. Remove the hose reel.

• Using an electric drill, drill holes 9/16” in diameter and

1 5/8” deep at the marked positions on the wall.

• Insert the masonry wall anchors into the anchor sleeve.

Next, insert the anchor and sleeve into the drilled holes

until the steel sleeve is completely in the wall.

• Place the hose reel on the masonry wall anchors.

• Install a washer, lock washer, and nut over each wall

anchor and tighten securely.

INSTALLATION

NOTE: The following hardware (not included)

is recommended for installation.

NOTE: The following hardware (not included)

is recommended for installation.

• Position and hold your hose reel against the wood wall

at a convenient height. Mark the position of each

suspension hole on the wall. Remove the hose reel.

• Using an electric drill, drill pilot holes 1/4” in diameter

and 2 1/2” deep at the marked positions on the wall.

• Align the hose reel suspension holes with the pilot

holes.

• Attach the hose reel to the wall using the lag screws

with washers and tighten securely.

MOUNTING ON BRICK MASONRY WAL MOUNTING ON FLAT WOOD FRAME WALL L

(4) 7 or 8 mm x 60 mm masonry wall anchors

(5/16” x 2 1/2”)

(4) Anchor sleeves

(4) Washers

(4) Lock washers

(4) Nuts

(4) 7 or 8 mm lag screws with washers

(5/16” x 2 1/2”)

This hose reel MUST be mounted to a solid masonry wall or to wall studs

TIP: Remember to use the correct size and quantity of hardware to properly support the

total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.

Filled with water, the additional weight can exceed 20 lbs. The mounting hardware must be

able to support the combined weight of the unit, garden hose, plus water.

Mounting Hole

Size 10mm

Mounting Hole

Size 10mm

Produkt Specifikationer

Mærke:	Liberty Garden
Kategori:	Haveslange
Model:	704

Har du brug for hjælp?

Hvis du har brug for hjælp til Liberty Garden 704 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Haveslange Liberty Garden Manualer

Liberty Garden 880 Manual

29 December 2024

Liberty Garden 710 Manual

15 August 2024

Liberty Garden 704 Manual

15 August 2024

Liberty Garden 708 Manual

15 August 2024

Liberty Garden 870 Manual

12 August 2024

Liberty Garden 1200 Manual

6 August 2024

Haveslange Manualer

Nyeste Haveslange Manualer

Aqua Joe AJEGH75-58-WSG Manual

17 Juni 2025

Flo 89330 Manual

9 Juni 2025

NEO Tools 15-891 Manual

6 Juni 2025

6 Juni 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

31 Maj 2025

Hozelock Superhoze Plus 8240 Manual

9 April 2025

Hozelock Auto Reel 30m Manual

9 April 2025