Lincoln Electric Invertec V275-S Manual

Lincoln Electric Svejseapparat Invertec V275-S

Læs gratis den danske manual til Lincoln Electric Invertec V275-S (33 sider) i kategorien Svejseapparat. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Lincoln Electric Invertec V275-S, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/33
INVERTEC ® V275-S
Operator’s Manual
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
IM802-C | Issue D ate 11-Feb
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
10993, 11001,11164, 11165, 11224,
11225, 11446
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
FOR ENGINE
powered equipment.
1.a. Turn the engine off before troubleshooting and maintenance
work unless the maintenance work requires it to be running.
____________________________________________________
1.b. Operate engines in open, well-ventilated
areas or vent the engine exhaust fumes
outdoors.
____________________________________________________
1.c. Do not add the fuel near an open flame
welding arc or when the engine is running.
Stop the engine and allow it to cool before
refueling to prevent spilled fuel from vaporiz-
ing on contact with hot engine parts and
igniting. Do not spill fuel when filling tank. If
fuel is spilled, wipe it up and do not start
engine until fumes have been eliminated.
____________________________________________________
1.d. Keep all equipment safety guards, covers and devices in
position and in good repair.Keep hands, hair, clothing and
tools away from V-belts, gears, fans and all other moving
parts when starting, operating or repairing equipment.
____________________________________________________
1.e. In some cases it may be necessary to remove safety
guards to perform required maintenance. Remove
guards only when necessary and replace them when the
maintenance requiring their removal is complete.
Always use the greatest care when working near moving
parts.
___________________________________________________
1.f. Do not put your hands near the engine fan.
Do not attempt to override the governor or
idler by pushing on the throttle control rods
while the engine is running.
___________________________________________________
1.g. To prevent accidentally starting gasoline engines while
turning the engine or welding generator during maintenance
work, disconnect the spark plug wires, distributor cap or
magneto wire as appropriate.
i
SAFETY
i
ARC WELDING CAN BE HAZARDOUS. PROTECT YOURSELF AND OTHERS FROM POSSIBLE SERIOUS INJURY OR DEATH.
KEEP CHILDREN AWAY. PACEMAKER WEARERS SHOULD CONSULT WITH THEIR DOCTOR BEFORE OPERATING.
Read and understand the following safety highlights. For additional safety information, it is strongly recommended that you
purchase a copy of “Safety in Welding & Cutting - ANSI Standard Z49.1” from the American Welding Society, P.O. Box
351040, Miami, Florida 33135 or CSA Standard W117.2-1974. A Free copy of “Arc Welding Safety” booklet E205 is available
from the Lincoln Electric Company, 22801 St. Clair Avenue, Cleveland, Ohio 44117-1199.
BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE
PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
WARNING
ELECTRIC AND
MAGNETIC FIELDS
may be dangerous
2.a. Electric current flowing through any conductor causes
localized Electric and Magnetic Fields (EMF). Welding
current creates EMF fields around welding cables and
welding machines
2.b. EMF fields may interfere with some pacemakers, and
welders having a pacemaker should consult their physician
before welding.
2.c. Exposure to EMF fields in welding may have other health
effects which are now not known.
2.d. All welders should use the following procedures in order to
minimize exposure to EMF fields from the welding circuit:
2.d.1.
Route the electrode and work cables together - Secure
them with tape when possible.
2.d.2. Never coil the electrode lead around your body.
2.d.3. Do not place your body between the electrode and
work cables. If the electrode cable is on your right
side, the work cable should also be on your right side.
2.d.4. Connect the work cable to the workpiece as close as
possible to the area being welded.
2.d.5. Do not work next to welding power source.
1.h. To avoid scalding, do not remove the
radiator pressure cap when the engine is
hot.
CALIFORNIA PROPOSITION 65 WARNINGS
Diesel engine exhaust and some of its constituents
are known to the State of California to cause can-
cer, birth defects, and other reproductive harm.
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
The Above For Diesel Engines The Above For Gasoline Engines

Produkt Specifikationer

Mærke: Lincoln Electric
Kategori: Svejseapparat
Model: Invertec V275-S

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric Invertec V275-S stil et spørgsmål nedenfor, og andre brugere vil svare dig


Svejseapparat Lincoln Electric Manualer

Lincoln Electric

Lincoln Electric Square Wave 205 Manual

16 Juni 2025
Lincoln Electric

Lincoln Electric Flex Feed 25L Manual

16 Juni 2025
Lincoln Electric

Lincoln Electric Flextec 335XS Manual

16 Juni 2025
Lincoln Electric

Lincoln Electric POWER MIG 262 Manual

16 Juni 2025
Lincoln Electric

Lincoln Electric Power MIG 262MP Manual

9 December 2024
Lincoln Electric

Lincoln Electric Invertec Power Wave 500 Manual

19 November 2024
Lincoln Electric

Lincoln Electric Invertec Power Wave 350 Manual

19 November 2024
Lincoln Electric

Lincoln Electric Wave AC/DC 1000SD Manual

19 November 2024
Lincoln Electric

Lincoln Electric Power Wave C300 Manual

13 November 2024
Lincoln Electric

Lincoln Electric Vantage 435X Manual

13 November 2024

Svejseapparat Manualer

Nyeste Svejseapparat Manualer

MKC

MKC MK-8988 Manual

19 Juni 2025
Stamos

Stamos S-MMA 120H Manual

18 Juni 2025
Stamos

Stamos S-MMA-180 MINI Manual

18 Juni 2025
Stamos

Stamos S-MMA-100 MINI Manual

18 Juni 2025
Stamos

Stamos S-MMA-200 MINI Manual

18 Juni 2025
Stamos

Stamos S-MMA-160 MINI Manual

17 Juni 2025
Stamos

Stamos S-MMA-140 MINI Manual

17 Juni 2025
Cigweld

Cigweld BlueVenom XF186 Manual

17 Juni 2025
Cigweld

Cigweld BlueVenom MG130 Manual

16 Juni 2025
Cigweld

Cigweld Arcmaster XC20 Manual

9 Juni 2025