Livn Thermostat Manual


Læs gratis den danske manual til Livn Thermostat (17 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Livn Thermostat, eller vil du spørge andre brugere om produktet?

Side 1/17
1
Manual Livn thermostat - EN
Auto mode; run preset program
Manual mode
Temporary manual mode
Holiday mode, Holiday days and temperature can be
Heating: if icon disappears, heating has stopped
Clock
WIFI connection, flashing EZ distribution mode
Wifi status: Disconnected
Cloud icon: flashing AP distribution network mode
Child lock
Key functions
ON/OFF: On/off button
Briefly press SET to switch between automatic mode and manual mode.
Turn on thermostat: press SET for 3-5 seconds to enter programmable setting.
Turn off thermostat: press SET for 3-5 seconds to enter advanced setting.
Confirm key: use together with SET key.
Only press it briefly to set time.
Press and hold for 3-5 seconds to enter the holiday mode setting. Press or ,
change OFF to ON, and press to confirm activation holiday mode. OK
+
Press and hold SET and OK to pair Wi- Fi.
Decrease key: hold for 3-5 seconds to lock/unlock.
Increase key.
In Auto mode, press or to enter temporary manual mode.
Advanced options:
In turn off mode, hold SET for 3-5 seconds to access advanced setting. From A1 to A9, briefly press
SET to choose the option, adjust data via , , and briefly press SET to switch next option. The
setting will be exited around 5 seconds after it has been set.
Temporary manual mode: if the temperature is set in automatic mode, the thermostat will run until
the set temperature, and then return to automatic mode.
2
No.
Setting Options
Data Setting Function
Factory Default
A1
Measure Temperature
Calibration
- +9°C 9
0.5°C Accuracy
Calibration
A2
Start temperature difference
setting
0.5 2.5°C
1 °C
A3
Child lock setting
0: half lock 1: full lock
0
A4
Limit value of low temperature
for external sensor
1 10°C
Exceed 10°C, screen display [ ], Low --
temperature protection was cancelled.
5°C
A5
Setting temperature minimum
limit
1 10°C
5°C
A6
Setting temperature maximum
limit
20 70°C
35°C
A7
Power on memory
0: Power on memory function
1: Shutdown power after power off
2: Shutdown power after power on
0: Power on
memory
function
A8
Run programming selection
0 5+2) / 1:(6+1 / 2:(7days) :( )
0 (5+2) :
A9
Reset factory setting
Display A o, press OK key till whole LCD
shows
Program daily schedule
In the advanced options: in power on mode, hold SET for 3-5 seconds to enter programming mode
setting, then press SET to choose: hour, minute, time period, and press and to adjust data. After
10 seconds the data will save automatically and the screen will close. You can select 5+2 (factory
default), 6+1 or 7 days with 6 time period settings. Tip: The optimum comfort temperature is 18°C
22°C.
Product specifications:
Model:
Livn -Fi thermostat (HY04) Wi
Range of temperature
adjustment:
5 35°C
Working environmental
temperature:
0 70°C
Current:
16A / 150V
Probe Sensor:
NTC(10k)1%
Power:
230V; 50/60HZ
Display accuracy:
+/- 0.5 °C
Warning
Performing work or repairs when the device is live can cause a short circuit or damage to the device.
Disconnect the power supply before repairs or work on the thermostat.


Produkt Specifikationer

Mærke: Livn
Kategori: Ikke kategoriseret
Model: Thermostat

Har du brug for hjælp?

Hvis du har brug for hjælp til Livn Thermostat stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Livn Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer