User manual
1
Thank you to have purchased a product brand LIVOO. We take great care in design, ergonomics and
simple use of our products. We hope that this product will give you complete satisfaction.
This manual is also available on www.livoo.fr
SAFETY ADVICES
READ CAREFULLY ALL THESE INSTRUCTIONS BEFORE USING THE DEVICE AND PRESERVE
THEM FOR ANY LATER NEED.
1. Please follow the rules depicted in this manual closely to ensure your safety.
2. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging
so as to prevent any possible injury or damage.
3. Keep this appliance out of reach of children. Take note that this appliance is not edible
and should not be placed in your mouth.
4. Do not modify, repair or dismantle the appliance. Doing so may result in fires, electric
shocks, complete breakdown of the appliance, etc. All of which, are not covered under
warranty.
5. Do not use any diluents or volatile liquid to clean the appliance. Keep in mind that the
surface of the appliance should only be wiped with a clean dry cloth.
6. Do not use this appliance in locations whereby there are high-temperatures of high
humidity levels; ideally, the appliance should be used in location free of dust and
exposure to direct sunlight.
7. Do not insert foreign objects, such as pins, into this appliance.
8. Do not touch this appliance when your hands are wet as this may results in electric
shocks.
9. Refrain from dropping the appliance as well any collision with other objects.
10.Should any abnormal situations or problems occur while using this appliance,
discontinue use the appliance immediately.
11. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard (*).
12. Don't charge when charger is short-circuit.
13. Don't use the product in high temperature places such as bath room.
14. Don't get the product wet in the rain or be affected with damp.
15. Put your devices and charger at -10 to 55 degree °C and in ventilated place when
charging
(*) qualified competent Person: technician of the after-sales service of the builder (manufacturer) or the
importer or every qualified, authorized and competent person to make this type (chap) of repair.
