Louis Tellier 208050 Manual
Louis Tellier
Blikopener
208050
Læs gratis den danske manual til Louis Tellier 208050 (4 sider) i kategorien Blikopener. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Louis Tellier 208050, eller vil du spørge andre brugere om produktet?
Side 1/4
208050 en ma 2012.07
*208.050 MANUALCAN-OPENER -
No. REF. DESCRIPTION
réf.
1 02870 RILSAN LEVER
2 02830 BLADE
3 02873 COURBANE RING
4 OX873 ST/ST RING
5 02877 BLADE SCREW
6 02872 NICKELED STEEL PLAQUETTE
7 02820 COG-WHEEL
8 02810 BODY ALONE 02
9 SQUARE 02
10 02888 SCREW 6X10 FOR 02
02840 HANDLE FOR CAN OPENER 02
OX842 HANDLE + CLIP FOR 02
02880 BED PLATE TO BE BOLTED EPOXY 02
02890 CLAMP BASE EPOXY 02
ASSEMBLING OF THE CAN-OPEN;
• Fixe the standby bolting to the table with 4 screws.
• Fixe the stand with a clamp fi xation. Tighten very hard so that the base can’t move when you open
a can.
• Fixe the stand with wall! fi xation hang on the wall (about 70/80 cm height).
Put the can-opener in the place allowed in the base, the blade facing the base.
UTILISATION
Disengage the knurled wheel in displacing the
rilsan lever to the left.
Lift the can-opener and place the can against the
pillar.
Let the tool drop and push down so that the blade
pierces the can lid
208050 en ma 2012.07
Tighten the knurled wheel with the rilsan lever
(in a clockwise direction).
Turn the crank (in a clockwise direction).
Back the rilsan lever
(in an anti-clockwise direction) and lift.
MAINTENANCE
CLEANING
Daily cleaning with a wet sponge, or in dish-washing machine.
Brush the cog-wheel regularly (a dirty cog-wheel can’t drive the can).
BLADE
CAUTION: DO NOT SHARPEN THE BLADE
When the blade leaves metal silver, it is chipped or worn and you must return the blade or change it.
You must loosen the screw, take out the rings and return the worn blade. Replace the rings and screw
back the blade.
COG-WHEEL
To dismantle the wheel, insert it in seating and turn the handle in opposite clockwise direction. As the
can-opener is dismantled, we advise you to clean the different parts of the can-opener (blade, cog-
wheel, base). Put the new cog-wheel in seating with the engraved arrow on the top.
BAGUE EN RILSAN -RILSAN LEVER
To reach the rilsan lever, it is necessary to dismantle the cog-wheel (see above) and to withdraw the
handle.
GUARANTEE
• The guarantee does not cover the-repairs due to:
Use not forecasted or abusive of the machine / deterioration due to a shock or a fall / assembling
or dismantling not forecasted in the user's instructions.
• The guarantee does not cover the wearing parts (blade and cog-wheel) and applies within the
framework of a normal use and maintenance.
Produkt Specifikationer
| Mærke: | Louis Tellier |
| Kategori: | Blikopener |
| Model: | 208050 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Louis Tellier 208050 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Blikopener Louis Tellier Manualer
19 August 2024
Blikopener Manualer
- Bifinett
- Cuisinart
- Oster
- Arendo
- Hamilton Beach
- Clatronic
- Hendi
- Tefal
- Proctor Silex
- Emga
- Beautiful
- Kenwood
- Black And Decker
- Brentwood
- Inventum
Nyeste Blikopener Manualer
23 Februar 2025
8 Januar 2025
16 December 2024
14 Oktober 2024
8 September 2024
4 September 2024
1 September 2024
1 September 2024
1 September 2024
29 August 2024