LumenRadio MoonLite² Manual

LumenRadio Joystick MoonLite²

Læs gratis den danske manual til LumenRadio MoonLite² (2 sider) i kategorien Joystick. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om LumenRadio MoonLite², eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MoonLite

INTRODUCTION

Thank you for buying a LumenRadio MoonLite

product. This guide is intended to give you a quick

start to experience all the benets of being wireless with LumenRadio’s CRMX system. For a more

complete user guide, scan the QR code or visit our website.

The MoonLite

you just purchased is designed to give you the highest level of reliability on the market

and is fully compatible with other CRMX products. Through this you can expand your wireless system

with units from our other CRMX product lines as well as products from our partners. For the latest

updates, please visit our website www.lumenradio.com.

We hope that you will enjoy the benets and freedom that your new MoonLite

will give you.

YOUR MOONLITE

MoonLite

MANUAL MoonLite

LUMENRADIOMANUAL MoonLite

LUMENRADIO

CHARGING

Your MoonLite

has a built-in battery to allow for true wireless operation. The battery can be recharged

in two ways:

1. Via the USB-C connector.

2. In a dedicated charging case (sold separately).

MoonLite

can be charged from any standard USB port or charger that can supply 5V and minimum 500mA.

If the unit is charging from the USB-C port, the unit is still operational, which allows it to run directly

from external power, for instance from a USB port on a xture.

When MoonLite

is charging in its charging case, the unit is not operational. This is to reduce the risk

of unwanted linking or unwanted RF emissions while charging.

SPECIFICATIONS

Power supply DC: 5 VDC +/- 10%

Max. current input (while charging): 500mA

Self-healing fuse: Yes

IP rating: IP 20

Dimensions (W x H x D): TBD [mm]

Weight: TBD g

Antenna: Integral antenna

Operating temp. range: -20 to +55 °C

Storage temp. range: -30 to +80 °C

Humidity: 0 – 90% non-condensing

Frequency range: 2402 – 2480 MHz (ISM band)

Max. RF output power: 280 mW (in North America only)

Supported protocols: DMX-512A (ANSI E1.11), RDM (ANSI E1.20)

Supported RF protocols (TX): CRMX, W-DMX G3, G4S

Supported RF protocols (RX): CRMX, CRMX2, W-DMX G3, G4, G4S & G5

LEGAL

Thank you for buying a LumenRadio MoonLite

product. This guide is intended to give you a quick

CRMX and W-DMX are trademarks of LumenRadio AB.

DMX-512A and RDM refers to ANSI national standards developed and maintained by ESTA,

Entertainment Services and Technology Association.

This product makes use of US patents 7,432,803; 9,208,680; EU patents EP 2415317, EP 2803248,

China patents CN 102369774, CN 104041189B and others.

Scan for additional information

XLRs

USB-C

Navigation buttons

Power/ Back button

Expansion port

Charging case

interface (on the back)

Screen

MoonLite

DMX

MoonLite

DMX

POWER ON/OFF

Power on the device by pressing and holding the power button until the startup logo shows in the

display (approximately ve (5) seconds).

To turn off the device, make sure you’re in the home screen, then press and hold the power button

until the device powers off (approximately ve (5) seconds).

HOME SCREEN

LINKING AND UNLINKING

All CRMX systems must be linked to operate. Linking is the process of tying receiver(s) to the transmit-

ter. After a receiver has been linked to a transmitter, it will stay linked until actively unlinked. Cycling

power does not affect the linking.

BLUETOOTH SUPPORT

Your MoonLite

is compatible with Bluetooth Low Energy and can be congured and updated from

LumenRadio’s CRMX Toolbox

app that is available from Apple AppStore for iOS and Google Play

for Android.

Turning Bluetooth on/off

For best performance, it is recommended to turn Bluetooth off on the device if it’s not needed. (This

is required when using older W-DMX receivers.)

Bluetooth can be turned on/off from the unit’s Settings menu.

PIN code

To protect against undesired connections from other users, it is possible to set a PIN code for the

Bluetooth interface. This can be done from the Toolbox

app or from the unit’s Settings menu.

It is also possible to remove the PIN code from the unit’s Settings menu. After the PIN code has been

removed, it might be necessary to select Forget device from your phone’s or tablet’s Bluetooth menu.

CHANGE FLEX MODE

Your MoonLite

can operate as either receiver (RX) or transmitter (TX). The mode of operation is called

Flex mode and can be changed from the unit’s Settings menu, or from the Toolbox

app.

USING DIFFERENT PROTOCOLS

MoonLite

supports several protocols, such as CRMX and different generations of W-DMX. In receiver

mode the unit will automatically change protocol at the time of linking to match the protocol of the

transmitter it is being linked to. In transmitter mode, the user must select the desired protocol among

the supported protocols.

Protocol is selected from the unit’s Settings menu or from the Toolbox

app.

Supported protocols

MANUAL MoonLite

LUMENRADIO MANUAL MoonLite

LUMENRADIO

Transmitter mode

CRMX Classic X

CRMX

W-DMX G3 X

W-DMX G4

W-DMX G4S X

W-DMX G5

Link receivers

To link receivers, follow these steps:

1. Power up the receivers you want to link.

2. Ensure the receivers are within range of the

transmitter.

3. Ensure receivers are unlinked (check the

receiver’s status).

4. Select link from the Linking menu.

5. The linking status will now show on the

display. Wait until linking has nished.

Unlink receivers

To unlink all receivers from a transmitter:

1. Ensure receivers are powered on and within

range of the transmitter.

2. Select Unlink from the transmitter’s Linking

menu.

3. The unlinking status will now show on the

display. Wait until unlinking has nished.

To unlink a specic receiver:

1. Ensure the receiver is powered on.

2. Select Unlink from the receiver’s Linking

menu.

3. The unlinking status will now show on the

display. Wait until unlinking has nished.

Antenna

Signal strength

Bluetooth enabled

Bluetooth connected

Charging

Battery

Charging completed

Produkt Specifikationer

Mærke:	LumenRadio
Kategori:	Joystick
Model:	MoonLite²

Har du brug for hjælp?

Hvis du har brug for hjælp til LumenRadio MoonLite² stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Joystick LumenRadio Manualer

LumenRadio MoonLite² Manual

19 Juni 2025

Joystick Manualer

Nyeste Joystick Manualer

Daikin BRC1H52K Manual

12 August 2025

Daikin BRC7EA629 Manual

12 August 2025

Asus ROG Kunai 3 Manual

11 August 2025

DJI D-RTK 2 Manual

11 August 2025

Daikin BRC1H82K Manual

11 August 2025

Daikin BRC7EA631 Manual

11 August 2025

Daikin BRC1H519K7 Manual

11 August 2025

Daikin EWYD510BZSS Manual

11 August 2025

Daikin BRC7EA632 Manual

11 August 2025

Daikin BRC1H519W7 Manual

11 August 2025