Luxli ORC-TIMP-3C Manual

Luxli Ikke kategoriseret ORC-TIMP-3C

Læs gratis den danske manual til Luxli ORC-TIMP-3C (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Luxli ORC-TIMP-3C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Thank you for choosing Luxli.

Precautions

Assembling the Case

The Luxli ORC-TIMP-3C case is designed to carry three Luxli Timpani lights

along with accessories such as cables and power adapters. It will also

accommodate most 1×1 lights. Its lightweight yet rugged construction

offers reinforced, padded protection from impacts and the elements when

transporting your lights to a location shoot.

The case is designed with removable reinforced dividers, so you can

customize the case to your specic travel or storage needs. The reinforced

top features a three-sided zipper for quick and easy access to your gear. A

durable, weather-resistant nylon case protects the internal compartment

from dirt, dust, and harsh weather. Rubber feet keep the case slightly

above the ground in case of wet conditions. For security, the double zipper

enclosure includes interlocking loops for a padlock.

•

Please read and follow these instructions, and keep this manual in a

safe place.

• Clean the unit with only a soft, dry cloth.

• Make sure the item is intact, and that there are no missing parts.

•

Exercise caution when using this product with the maximum load

capacity.

• All images are for illustrative purposes only.

Unfold the shell, and place it on a

at surface.

Identify the long side of each

L divider. The long side of each

L divider will form the left and

right sides of the case. Insert and

connect the L dividers into the

case.

3. Press the sides of the L dividers to

the touch-connect strips that line

the top edge of the shell.

Important! Make sure that each

side is snugly seated into the

edges and corners of the shell.

Make sure the zipper lip of the

case is above the edge of the L

dividers.

4. Insert the short dividers, and then

insert the long fabric-covered

divider.

Tip: The short dividers will help

you judge where to insert the

fabric-covered long divider. If

you don’t need three separate

compartments, space the short

dividers according to your storage

needs.

Insert the cushions and long

dividers.

Tip: Position the cushions with the

short side at the top and bottom,

and use the cushions as spacers

for the long dividers.

Place the Timpani lights upside

down into each section. The knobs

or tilt lock handle should rest on

the cushions.

Important! Before zipping up the

case, make sure that the light xtures

are secure and that they t inside

their compartments. If one of the

xtures has too much room, reposition

the long divider to assure a snug t.

Contents Include

• Nylon shell

• L dividers (×2)

• Short dividers (×2)

• Long fabric divider

• Long dividers (×2)

• Cushions (×6)

• Shoulder strap

Specications

Carrying/Transport Options Grab handles, strap handles, shoulder strap

Interior Dimensions (H × W × D) 16.5 × 14.5 × 15 in. (41.9 × 36.8 × 38.1 cm)

Exterior Dimensions (H × W × D) 18 × 16.5 × 15.5 in. (45.7 × 41.9 × 39.4 cm)

Interior Material Nylon, annelette

Exterior Material Nylon

Type of Closure Double interlocking zipper accepts a padlock

Load Capacity 35 lb. (15.9 kg)

Weight 8.2 lb. (3.7 kg)

www.luxlilight.com

One-Year Limited Warranty

This LUXLI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period

of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with

respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use

of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty

provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.