Luxul XWC-1000 Manual

Luxul Adgangspunkt XWC-1000

Læs gratis den danske manual til Luxul XWC-1000 (8 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Luxul XWC-1000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Fo ld Fo ld Fo ld

READ ME FIRST

BEFORE YOU BEGIN INSTALLATION

Access Point Firmware: Be sure that the ﬁrmware of any APs you intend to

manage with the Wireless Controller is v5 or newer. Visit the AP Firmware

upgrade page at luxul.com/ap-upgrade for details.

Controller Setup Sequence: Once you conﬁgure the XWC-2000 Wireless

Controller, the Controller will automatically conﬁgure and manage all

compatible APs on the same subnet. APs can be added or removed at any

time, however. A DHCP server is required on the network.

Firmware Updates: The XWC-2000 Wireless Controller automatically

checks for ﬁrmware updates of Controller-compatible APs and the Wireless

Controller itself, but requires Internet access to do so. The Wireless

Controller will still operate without Internet access, but ﬁrmware updates will

not be available.

Physical Installation

Connecting Devices: The XWC-2000 Wireless Controller simply

connects to the network along with any compatible Access Points.

Wireless Controller

PoE Injector or

Compatible PoE Switch

LAN

Wireless Controller

XWC-2000

Package Contents:



XWC-2000 Wireless Controller



Rack mount kit



Rubber feet



Power cord

QUICK INSTALL GUIDE

Sales

801-822-5450

sales@luxul.com

Technical Support

801-822-5450

support@luxul.com

LUX-QIG-XWC-2000-v1 0811802

No part of this document may be modiﬁed or adapted in any way, for any purposes without permission

in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves

the right to make changes to any product to improve reliability, function, or design. No license is granted,

either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied

license only exists for equipment, circuits and subsystems contained in this or any Luxul product.

Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and

registered trademarks are property of their respective holders.

Produkt Specifikationer

Mærke:	Luxul
Kategori:	Adgangspunkt
Model:	XWC-1000
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	178.8 mm
Højde:	44.5 mm
Vægt:	1470 g
Produktfarve:	Sort
Driftstemperatur (T-T):	32 - 104 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	AES, TKIP, WPA, WPA2
Strømforbrug (maks.):	8.6 W
Placering:	Bord
Netværksstandarder:	IEEE 802.1Q
Knap til nulstilling:	Ja
LED-indikatorer:	Activity, Power, System
Bæredygtighedscertifikater:	CE, RoHS
Maksimal dataoverførselshastighed:	- Mbit/s
Indgangsstrøm:	0.3 A
Firmware kan opgraderes:	Ja
VLAN understøttelse:	Ja
Antal virtuelle AP'er (VAP'er):	16