Luxul XWR-1200 Manual

Luxul Router XWR-1200

Læs gratis den danske manual til Luxul XWR-1200 (8 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Luxul XWR-1200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Fo ld Fo ld Fo ld

READ ME FIRST

QUICK INSTALL GUIDE

Dual-Band AC1200 Gigabit Router

XWR-1200

Includes:



Dual-Band Wireless AC1200 Gigabit Router



Dual Band Antennas (2)



Ethernet Cable



Power Adapter

ROUTER SETUP AND CONFIGURATION

Physical Installation

The XWR-1200 Wireless Router is designed for simple and ecient installation.

For horizontal installation, install the rubber feet and position the XWR-1200

on a desk or other horizontal surface with adequate room around the device

for ventilation. For wall or ceiling mounting, simply follow the directions on the

included mounting pattern and use the mounting keyholes on the XWR-1200.

Connecting Antennas, Ethernet and Power



Antennas: Ensure all dual-band antennas are installed on the router.



INTERNET Connection: Connect the Ethernet cable from the modem/

router equipment provided by your Internet Service Provider (ISP) to the

black INTERNET port of the XWR-1200.



AC Power: Connect the included AC Adapter to the XWR-1200 ﬁrst and then

to the AC outlet.

Preparing for Access

IP Addressing

The XWR-1200 default LAN IP address is 192.168.0.1. The DHCP server on the

XWR-1200 is conﬁgured by default to create a 192.168.0.x network.

Both the default LAN IP address and subnet scheme can be changed. However

for hassle-free plug-and-play installation of other Luxul hardware, we recom-

mend you use the default IP address if possible.

If your client device is set to obtain an address automatically, no further conﬁg-

uration is required and you can skip to the next step, Access and Setup.

If your computer or device isn’t set to obtain an IP address automatically,

you’ll need to set a temporary static IP address on that device. Set the IP

address of your computer to an address in the 192.168.0.X range, then

set the Gateway/Router address to 192.168.0.1 (the default IP address of

the XWR-1200).

n NOTE: Visit http://luxul.com/ip-addressing to learn more about

changing your computer’s IP address and getting connected.

Access and Setup

Getting Connected



Connecting Via an Ethernet Device: Use an Ethernet cable to connect

your computer to one of the green XWR-1200 LAN ports. Ethernet is the

preferred method of connection.



Connecting Via a Wireless Device: Connect a wireless client device

to one of the XWR-1200 default wireless networks (Luxul1200 or

Luxul12005G). Both Wireless networks will run in Open security mode, so

a passphrase will not be required until wireless security is conﬁgured.

Open a web browser, enter 192.168.0.1, then log in to the router using the

default user name and password and proceed with conﬁguration:

Default IP: 192.168.0.1

Username: admin

Password: admin

n NOTE: If another device on your network shares the 192.168.0.1

address, you’ll need to reassign that device a dierent IP

address to conﬁgure the XWR-1200.

n NOTE: Only devices that support the 5GHz frequency will see the

default Luxul12005G wireless network.

Sales

P: 801-822-5450

E: sales@luxul.com

Technical Support

P: 801-822-5450 Option 3

E: support@luxul.com

LUX-QIG-XWR-1200-v8 04101704

No part of this document may be modiﬁed or adapted in any way, for any purposes without permission

in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves

the right to make changes to any product to improve reliability, function, or design. No license is granted,

either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied

license only exists for equipment, circuits and subsystems contained in this or any Luxul product.

Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and

registered trademarks are property of their respective holders.

Produkt Specifikationer

Mærke:	Luxul
Kategori:	Router
Model:	XWR-1200
Bredde:	142 mm
Højde:	38 mm
Vægt:	450 g
Produktfarve:	Sort
Produkttype:	Bordplade router
USB-port:	Ja
Antal USB 2.0-porte:	1
Ethernet LAN:	Ja
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Driftstemperatur (T-T):	32 - 122 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	WPA, WPA-PSK, WPA2, WPA2-PSK
Indikatorlampe:	Ja
Ethernet WAN:	Ja
Wi-Fi-bånd:	Dual-band (2,4 GHz / 5 GHz)
Bedste Wi-Fi standard:	Wi-Fi 5 (802.11ac)
WLAN dataoverførselshastighed (maks):	1200 Mbit/s
WLAN dataoverførselshastighed (første bånd):	300 Mbit/s
WLAN dataoverførselshastighed (anden bånd):	866 Mbit/s
Ethernet LAN-grænsefladetype:	Gigabit Ethernet
Netværksstandarder:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
VPN-support:	PPTP, L2TP, IPSEC
Portvideresendelse:	Ja
DC-in-stik:	Ja
DHCP-klient:	Ja
DHCP-server:	Ja
Antennedesign:	Ekstern
Antenner, antal:	2
Overfører strøm:	30 dBmW
Knap til nulstilling:	Ja
Servicekvalitet support (QoS):	Ja
Firewall:	Ja
Gæsteadgang:	Ja
LED-indikatorer:	LAN, Power, System, USB, WAN
Strømkilde type:	Vekselstrøm
Udgangsspænding:	12 V
Udgangsstrøm:	2 A
Bæredygtighedscertifikater:	CE, RoHS
MIMO:	Ja
Filtrering af MAC-adresser:	Ja
Aftagelig (e) antenne (r):	Ja
Strømforsyning:	18 W
Antal gæstenetværk (2,4 GHz):	3
Antal gæstenetværk (5 GHz):	3
Antal VPN-tunneler:	1
SSID-baseret VLAN-opgave:	Ja
Antal datastrømme:	2x2
Modtaget effekt:	1000 dBmW