2
User Guide ( )English
Introduction
Box Contents
BX3 BT Speakers (Stereo Pair)
Foam Feet
2-Prong IEC Power Cable
1/8” TS Speaker Interconnect Cable
1/8” to 1/8” TRS Aux Cable
1/8” TRS to RCA Cable
User Guide
Safety & Warranty Manual
Product Registration and Support
To download your included software, follow the instructions below:
1. Visit m-audio.com/softwaredownload.
2. Follow the on-screen instructions to register your product.
3. Upon successful registration, any applicable software downloads, product codes
and promotions will show in your account.
Note: A high-speed internet connection is recommended. If you need assistance, do not
return your product to the dealer. Instead, please contact our helpful technical support team
by visiting m-audio.com/support.
Setup
The configuration and placement of your BX3 BT monitors on speaker stands or your desktop
workstation may affect the performance of the speakers. Use the following tips to achieve the
best performance out of your BX3 BT monitors.
Tip: If possible, place your BX3 BT monitors on speaker stands instead of your desktop.
Desks tend to resonate sympathetically at low frequencies and may adversely affect the bass
response of your monitors. If speaker stands are not possible due to space restrictions and
you notice a buildup in bass, try placing the monitors on isolation pads to acoustically de-
couple the monitors from the desk.
Precautions
• Correct Power Operation: Since the BX3 BT contains amplifiers, it must be connected
to a power outlet. Before connecting power, please make sure that the Vol/Power knob
is set to the off position.
• Foam Feet: In order to maximize physical stability, we recommend you use the provided
foam feet on the bottoms of the BX3 BT monitors.
• Connecting to a Computer Sound Card or Other Audio Output Device: Your BX3 BT
speakers have a variety of inputs for use with a multitude of devices. Before connecting
the BX3 BT speakers, make sure the power from the computer or other output device has
been turned off and the BX3 BT speakers are also turned off. Connect the RCA or 1/4"
(6.35 mm) input jacks to the corresponding output connectors of a computer sound card,
portable music player, etc. You can also use the included 1/8" (3.5 mm) TRS stereo aux
cable to connect a secondary audio device to the Aux input on the front of the BX3 BT or
connect via Bluetooth®.
