Mach Power EB-TSTR-033 Manual

Mach Power Skærm EB-TSTR-033

Læs gratis den danske manual til Mach Power EB-TSTR-033 (52 sider) i kategorien Skærm. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Mach Power EB-TSTR-033, eller vil du spørge andre brugere om produktet?

Side 1/52
User Manual
FOR TOUCH MONITORS FROM: 55" TO 80"
EN
Manuale Utente
PER MONITOR TOUCH DA: 55" A 80"
ITA
Manual de usuario
PARA MONITORES TÁCTILES DE: 55"A 80"
ES
EB-TSTR-033
2
ENG
3
Index
Package contents
Installation of the poles at the base
Installation of telescopic mounting poles
Shelf installation
Installation of the support
VESA mounting plans
Monitor assembly diagram
Monitor mounting on the stand
Installing the webcam stand
Cable installation
Product specifications
5
6
7
8
9
10
11
12
13
14
16
4
Warning!
Read the following manual carefully before starting. Improper installation or as-
sembly could cause serious personal injury and property damage.
If you have difficulty assembling or have questions, contact a qualified installer.
Do not install or assemble the product in case there are damaged or missing par-
ts, if spare parts are needed, contact the dealer.
The product fits most of the 55 "- 80" LCD / plasma screen; maximum weight of
the LCD / plasma screen: 90.9 kg: maximum shelf load 11.4 kg .; Maximum shelf
load for webcam: 4.5 kg.
Do not use this product for different purposes.
This product contains moving parts, use with caution.
The manufacturer declines all responsibility for modifications, improper instal-
lation or installation beyond the specified weight. The manufacturer will not be
responsible for any damage resulting from the use or inability to use the product.
The images are for illustrative purposes.
5
ENG
Package contents
6
Installation of the poles at the base
Note
Make sure that the windows for the management and for the passage of the
cables are turned towards the back of the base.
Caution
Make sure the screws are securely fastened.
7
ENG
Installation of telescopic mounting poles
Step1
Unscrew the screw located on the lower right part of the pole, using J (Allen key).
Save the vine. As shown in Fig-1.
Step2
Use both hands to raise and rotate the right pole to the desired height. Then ro-
tate the pole again until the holes match and insert the spring ball. Firmly fix the
screw as shown in fig-2.
Step3
Repeat step 2 with the left post.
right upper poles
left upper poles
height label
right lower pole
left lower pole
safety screws
safety screws
figure 1 figure 2
8
Shelf installation
9
ENG
Caution
Make sure the screws are securely fastened.
Choose the height of the shelf and screw to lock.
Installation of the support
10
Caution
Make sure the screws are securely fastened.
VESA mounting plans
VESA 200x200 mm - 800x500 mm
11
ENG
Monitor assembly diagram
safety tips
Caution
Make sure the screws are securely fastened.
Note
To avoid damage, use a plastic spacer when the depth of the mounting holes is
minimal
12
Monitor mounting on the stand
Caution
Make sure the screws are securely fastened.
Note
Move the Monitor towards the center.
13
ENG
Installing the webcam stand
Caution
Make sure the screws are securely fastened.
Note
Height adjustable
14
Cable installation
Step1
If you need to change the height of the monitor, the operation must be carried
out by 2 people. A person holds the monitor from the bottom, as shown in Fig -1.
Step2
the other person unscrews the safety screws from both the right and left pole, so
that the desired height can be chosen, as set in Fig-2.
Step3
Once the height has been decided, retighten the safety screws to both the right
and left pole, as shown in Fig-3.
Step4
Pass the cables through the slots located on both the upper and lower poles as
shown in Figs 4, 5 and 6.
15
ENG
16
Product specifications
Maximum load capacity 90.9 kg
Maximum shelf load 11.4 kg
Maximum load webcam support 4.5 kg
VESA 200 x 200 - 800 x 500 mm
17
ENG
18
19
ITA
19
Indice
Contenuto della confezione
Installazione dei pali alla base
Installazione dei pali di montaggio telescopici
Installazione mensola
Installazione del sostegno
Schemi di montaggio VESA
Schema di montaggio Monitor
Montaggio Monitor sullo Stand
Installazione del supporto per webcam
Installazione cavi
Specifiche del prodotto
21
22
23
24
25
26
27
28
29
30
32
2020
Attenzione!
Leggere attentamente il seguente manuale prima di iniziare. Un'installazione o
un assemblaggio impropro potrebbero causare gravi lesioni personali e danni alla
proprietà.
In caso di difficoltà nell’assemblaggio o si hanno delle domande, contattare un
installatore qualificato.
Non installare o assemblare il prodotto in caso in cui ci siano pezzi danneggiati o
mancanti, se sono necessari pezzi di ricambio, contattare il rivenditore.
Il prodotto si adatta alla maggior parte dello schermo LCD / plasma da 55 "- 80";
peso massimo dello schermo LCD / al plasma: 90,9 kg: carico massimo mensola
11,4 kg .; Carico massimo mensola per webcam: 4,5 kg.
Non utilizzare questo prodotto per scopi diversi.
Questo prodotto contiene parti mobili, utilizzare con cautela.
Il produttore declina ogni responsabilità per modifiche, installazione impropria o
installazione oltre il peso specificato. Il produttore non sarà responsabile per even-
tuali danni derivanti dall'uso o dall'impossibilità di utilizzare il prodotto.
Le immagini sono a scopo illustrativo.
22
Installazione dei pali alla base
Nota
Assicurarsi che le finestre per la gestione e per il passaggio dei cavi siano rivolte
verso il retro della base.
Attenzione
Accertarsi che le viti siano fissate saldamente.


Produkt Specifikationer

Mærke: Mach Power
Kategori: Skærm
Model: EB-TSTR-033

Har du brug for hjælp?

Hvis du har brug for hjælp til Mach Power EB-TSTR-033 stil et spørgsmål nedenfor, og andre brugere vil svare dig