Makita BO4900 Manual

Makita Rysteplaster BO4900

Læs gratis den danske manual til Makita BO4900 (8 sider) i kategorien Rysteplaster. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Makita BO4900, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Finishing Sander

BO4900V

BO4900

BO4901

001680

ENGLISH (Original instructions)

SPECIFICATIONS

Model BO4900V BO4900 BO4901

Pad size 115 mm x 229 mm 115 mm x 229 mm 115 mm x 229 mm

Abrasive paper size 115 mm x 280 mm 115 mm x 280 mm 115 mm x 280 mm

Orbits per minute (min-1) 4,000 - 10,000 10,000 10,000

Sanding stroke rate (min-1

) 8,000 - 20,000 20,000 20,000

Overall length 289 mm 289 mm 289 mm

Net weight 2.7 kg 2.7 kg 2.7 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE052-1

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted

surfaces.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 71 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model BO4900,BO4900V

Work mode : sanding metal plate

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model BO4901

Work mode : sanding metal plate

Vibration emission (ah) : 4.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Rysteplaster
Model:	BO4900
Vægt:	2700 g
Strøm:	330 W
Strømkilde:	Vekselstrøm
Kabellængde:	2.5 m
Støvbeholder type:	Støvpose
Støvudledningsport:	Ja
Tomgangssvingningshastighed (maks.):	10000 OPM
Slibesål type:	Rystepudser