Makita DCO180Z Manual
Makita
Skæremaskine
DCO180Z
Læs nedenfor 📖 manual på dansk for Makita DCO180Z (12 sider) i kategorien Skæremaskine. Denne guide var nyttig for 38 personer og blev bedømt med 4.3 stjerner i gennemsnit af 19.5 brugere
Side 1/12

1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Cut-Out Tool
DCO140
DCO180
014848

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DCO140 DCO180
Collet chuck capacity 3 mm, 6 mm or 1/8", 1/4" 3 mm, 6 mm or 1/8", 1/4"
Rated speed (n)/ No load speed (n
0) 30,000 min-1 30,000 min-1
Overall length 313 mm 313 mm
Net weight 1.6 kg 1.7 kg
Rated voltage D.C. 14.4 V D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・ Read instruction manual.
・ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
ENE012-1
Intended use
The tool is intended for cutting gypsum, wood, plastic
and soft wall tiles.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 77 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : rotation without load
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Cut-Out Tool
Model No./ Type: DCO140, DCO180
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
Cd
Ni-MH
Li-ion
Produkt Specifikationer
Mærke: | Makita |
Kategori: | Skæremaskine |
Model: | DCO180Z |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita DCO180Z stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skæremaskine Makita Manualer

19 August 2024

11 August 2024

4 August 2024

2 August 2024

2 August 2024

1 August 2024

29 Juli 2024

27 Juli 2024

26 Juli 2024

24 Juli 2024
Skæremaskine Manualer
- Skæremaskine Edlund
- Skæremaskine CaterChef
- Skæremaskine Rotel
- Skæremaskine Skil
- Skæremaskine Clas Ohlson
- Skæremaskine Thane
- Skæremaskine Bron-Coucke
- Skæremaskine Weston
- Skæremaskine Black And Decker
- Skæremaskine Prowork
- Skæremaskine Boss
- Skæremaskine Sammic
- Skæremaskine Grundig
- Skæremaskine Graef
- Skæremaskine Turmix
Nyeste Skæremaskine Manualer

13 Juni 2025

13 Juni 2025

12 Juni 2025

12 Juni 2025

12 Juni 2025

12 Juni 2025

12 Juni 2025

12 Juni 2025

12 Juni 2025

11 Juni 2025