Makita DSC251ZK Manual

Makita Skæremaskine DSC251ZK

Læs gratis den danske manual til Makita DSC251ZK (16 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 31 anmeldelser. Har du et spørgsmål om Makita DSC251ZK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Cordless Steel Rod Cutter

DSC251

INSTRUCTION MANUAL

Before installing and operating this machine, read, understand and follow

all instructions and operating procedures. Keep this Instruction Manual with

the machine.

ENGLISH: Original instructions

Read before use.

2ENGLISH

Read, understand and follow all safety instructions and operating

procedures. If you do not understand the instructions, or if condi-

tions are not correct for proper operation, DO NOT OPERATE THE

MACHINE. Consult your supervisor or other responsible person.

SPECIFICATIONS

Model: DSC251

Voltage D.C. 18 V

Weight 4.0 kg (8.82 lbs)

Dimensions (L x W x H) 471 mm x 137 mm x 139 mm / 18-17/32″ x 5-25/64″ x 5-15/32″ (excluding a handle)

Cutting Capacity of a rebar

(620 N/mm2 / 90,000 psi )

φ10 to φ25 mm (SD490)

3/8″ to 1″ (Grade 60)

No load speed 2200 min-1

External Diameter of Blade 110 mm / 4.3″

Battery cartridge BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SE / DC18SF / DC18SD

• Specications and design may be subject to change without prior notice.

• Specications and battery cartridge may differ from country to country.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

WARNING

Read and understand this instruction manual before

operating this machine. Failure to follow operating

instructions could result in death or serious injury.

WARNING LABELS RELATED TO

SAFETY

Flying debris and loud noise hazards. Wear ear and

eye protection.

Moving blade. Keep hands clear while machine is

operating. Turn power off before servicing.

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

SAVE THESE INSTRUCTIONS

Meaning of “caution” and “warning” indications

Caution: Indicates a potentially hazardous situation

which, if not avoided, may result in minor

or moderate injury. This is also used to

alert against unsafe practices associated

with events that could lead to personal

injury.

Warning: Indicates a potentially hazardous situation

which, if not avoided, will result in death or

serious injury.

*** Makita shall not be responsible for any inci-

dental damages or personal injuries result-

ing from negligence of Warnings and Safety

Instructions contained in the Instruction

Manual.

Intended use

The tool is intended for cutting rebar.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (L ) : 78 dB(A)pA

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Skæremaskine
Model:	DSC251ZK

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DSC251ZK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Makita Manualer

Makita WST05 Manual

19 August 2024

Makita UR101CZ Manual

11 August 2024

Makita DUR368APT2 Manual

4 August 2024

Makita DSC102ZJ Manual

2 August 2024

Makita DSC251ZK Manual

2 August 2024

Makita DCO180Z Manual

1 August 2024

Makita JN1601 Manual

29 Juli 2024

Makita CP100DZ Manual

27 Juli 2024

Makita EK7301 Manual

26 Juli 2024

Makita DSC121ZKX1 Manual

24 Juli 2024

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

RYOBI RHC4 Manual

31 Juli 2025

Guede GHF 800 Manual

30 Juli 2025

Sencor SFS 1000WH Manual

26 Juli 2025

Royal Catering RCGS-750 Manual

23 Juli 2025

Scheppach WTS2000 Manual

23 Juli 2025

Festool DSC-AG 125 FH-Plus Manual

19 Juli 2025

Hendi 221297 Manual

19 Juli 2025

Severin AS 9578 Manual

11 Juli 2025

Team AS 1000 Manual

9 Juli 2025

Graef STYLE S12002 Manual

8 Juli 2025