Makita JN1601 Manual

Makita Skæremaskine JN1601

Læs gratis den danske manual til Makita JN1601 (8 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Makita JN1601, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Nibbler

JN1601

004772

ENGLISH (Original instructions)

SPECIFICATIONS

Model JN1601

Steel up to 400 N/mm2 1.6 mm / 16 ga

Steel up to 600 N/mm2 1.2 mm / 18 ga

Steel up to 800 N/mm2 0.8 mm / 22 ga

Max. cutting capacities

Aluminum up to 200 N/mm

2 2.5 mm / 13 ga

Outside edge 50 mm

Min. cutting radius Inside edge 45 mm

Strokes per minute (min-1

) 2,200

Overall length 261 mm

Net weight 1.6 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE037-1

Intended use

The tool is intended for cutting sheet steel and stainless

sheet steel.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 83 dB(A)

Sound power level (L

WA) : 94 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : cutting sheet metal

Vibration emission (ah) : 7.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Skæremaskine
Model:	JN1601

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita JN1601 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Makita Manualer

Makita WST05 Manual

19 August 2024

Makita UR101CZ Manual

11 August 2024

Makita DUR368APT2 Manual

4 August 2024

Makita DSC102ZJ Manual

2 August 2024

Makita DSC251ZK Manual

2 August 2024

Makita DCO180Z Manual

1 August 2024

Makita JN1601 Manual

29 Juli 2024

Makita CP100DZ Manual

27 Juli 2024

Makita EK7301 Manual

26 Juli 2024

Makita DSC121ZKX1 Manual

24 Juli 2024

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

RYOBI RHC4 Manual

31 Juli 2025

Guede GHF 800 Manual

30 Juli 2025

Sencor SFS 1000WH Manual

26 Juli 2025

Royal Catering RCGS-750 Manual

23 Juli 2025

Scheppach WTS2000 Manual

23 Juli 2025

Festool DSC-AG 125 FH-Plus Manual

19 Juli 2025

Hendi 221297 Manual

19 Juli 2025

Severin AS 9578 Manual

11 Juli 2025

Team AS 1000 Manual

9 Juli 2025

Graef STYLE S12002 Manual

8 Juli 2025