Makita DTM50Z Manual

Makita Multiværktøj DTM50Z

Læs gratis den danske manual til Makita DTM50Z (12 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Makita DTM50Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Multi Tool

DTM40

DTM50

012764

ENGLISH (Original instructions)

SPECIFICATIONS

Model DTM40 DTM50

Oscillation per minute 6,000 - 20,000 (min

-1)

Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)

Overall length 324 mm

Standard battery cartridge BL1430/

BL1440

BL1415*/

BL1415N*

BL1830/ BL1840/

BL1850

BL1815*/ BL1815N*/

BL1820*

without dust extraction attachment

1.9 kg 1.7 kg 2.0 kg 1.8 kg

Net weight

with dust extraction attachment

2.0 kg 1.8 kg 2.1 kg 1.9 kg

Rated voltage D.C. 14.4 V D.C. 18 V

* NOTE: For continuous operation, high capacity battery cartridge BL1430, BL1440, BL1830, BL1840 and BL1850 are recommended.

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END221-2

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE080-1

Intended use

The tool is intended for sawing and cutting wood, plastic,

gypsum, non-ferrous metals, and fastening elements (e.

g. unhardened nails and staples). It is also intended for

working soft wall tiles, as well as dry sanding and

scraping of small surfaces. It is especially for working

close to edge and flush cutting.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Work mode: Sanding

Sound pressure level (L

pA) : 78 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Work mode: Cutting with plunge cut saw blade

Model DTM40

Sound pressure level (L

pA) : 82 dB (A)

Sound power level (LWA

) : 93 dB (A)

Uncertainty (K) : 3 dB (A)

Model DTM50

Sound pressure level (L

pA) : 84 dB (A)

Sound power level (LWA

) : 95 dB (A)

Uncertainty (K) : 3 dB (A)

Work mode: Cutting with segmental saw blade

Sound pressure level (L

pA) : 81 dB (A)

Sound power level (LWA

) : 92 dB (A)

Uncertainty (K) : 3 dB (A)

Work mode: Scraping

Model DTM40

Sound pressure level (L

pA) : 81 dB (A)

Sound power level (LWA

) : 92 dB (A)

Uncertainty (K) : 3 dB (A)

Model DTM50

Sound pressure level (L

pA) : 83 dB (A)

Sound power level (LWA

) : 94 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Multiværktøj
Model:	DTM50Z
Vekselstrømsindgangsspænding:	18 V
Bredde:	324 mm
Dybde:	80 mm
Højde:	122 mm
Vægt:	2200 g
Produktfarve:	Black, Blue
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Soft greb:	Ja
Ergonomisk designet:	Ja
Lydtryksniveau:	78 dB
Justerbar hastighed:	Ja
Tomgangssvingningshastighed (maks.):	20000 OPM
Usikkerhed - k:	1.5 m/s²
Strømbeskyttelsesfunktioner:	Overbelastning
Hjælpehåndtag:	Ja
Tomgangssvingningshastighed (min.):	6000 OPM
Oscillationsvinkel:	1.6 °
Forward/Reverse drift:	Ja
Vibrationsniveau (dyksavklinge):	5.5 m/s²
Vibrationsniveau (segment savklinge):	2.5 m/s²