Makita LS002G Manual
Makita
Ikke kategoriseret
LS002G
Læs nedenfor 📖 manual på dansk for Makita LS002G (40 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 20 personer og blev bedømt med 4.8 stjerner i gennemsnit af 10.5 brugere
Side 1/40
INSTRUCTION MANUAL
Cordless Slide Compound Miter Saw
LS002G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: LS002G
Blade diameter 216 mm
Hole (arbor) diameter (country specic) 15.88 mm / 25.4 mm / 30 mm
Max. kerf thickness of the saw blade 2.4 mm
Max. miter angle Left 60°, Right 60°
Max. bevel angle Left 48°, Right 48°
No load speed 4,800 min-1
Dimensions (L x W x H) 702 mm x 551 mm x 557 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 16.4 - 17.0 kg
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Cutting capacities (H x W) with blade 216 mm in diameter
Miter angle Bevel angle
45° (left) 45° (right)0°
0° 50 mm x 312 mm 70 mm x 312 mm 30 mm x 312 mm
45° (left and right) 50 mm x 220 mm 70 mm x 220 mm 30 mm x 220 mm
60° (left and right) 70 mm x 155 mm– –
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
To avoid injury from ying debris, keep
holding the saw head down, after making
cuts, until the blade has come to a com-
plete stop.
When performing slide cut, rst pull car-
riage fully and press down handle, then
push carriage toward the guide fence.
When performing bevel cut, rst loosen the
grip dial and tilt the carriage to the desired
angle, then tighten the grip dial.
When tilting the blade beyond the range 0°
- 45°, turn the releasing lever for 48° bevel
angle in clockwise direction.
Do not place hand or ngers close to the
blade.
Wear safety glasses.
Do not stare at operating lamp.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for accurate straight and miter cutting in wood.
With appropriate saw blades, aluminum can also be sawed.
Do not use the saw to cut other than wood, aluminum or
similar materials.
Produkt Specifikationer
| Mærke: | Makita |
| Kategori: | Ikke kategoriseret |
| Model: | LS002G |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita LS002G stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Makita Manualer
29 Marts 2025
29 Marts 2025
29 Marts 2025
29 Marts 2025
29 Marts 2025
6 Februar 2025
12 Januar 2025
7 Januar 2025
16 December 2024
16 December 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret Mircom
- Ikke kategoriseret Durable
- Ikke kategoriseret Turbo Scrub
- Ikke kategoriseret Jokari
- Ikke kategoriseret Rolls
- Ikke kategoriseret Palmako
- Ikke kategoriseret Sony
- Ikke kategoriseret MOZOS
- Ikke kategoriseret Homak
- Ikke kategoriseret PowerColor
- Ikke kategoriseret Zepter
- Ikke kategoriseret Jurox
- Ikke kategoriseret Fimer
- Ikke kategoriseret ESUN
- Ikke kategoriseret Ultron
Nyeste Ikke kategoriseret Manualer
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025