Makita PO6000C Manual

Makita Polermaskine PO6000C

Læs gratis den danske manual til Makita PO6000C (8 sider) i kategorien Polermaskine. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Makita PO6000C, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
INSTRUCTION MANUAL
Random Orbit Polisher
PO5000C
PO6000C
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: PO5000C PO6000C
Pad diameter 125 mm 150 mm
Orbits per minute 0 - 6,800 min-1
Overall length 451 mm
Net weight 2.8 kg
Safety class /II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• WeightaccordingtoEPTA-Procedure01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
WasteElectricandElectronicEquipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for polishing.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to 60745-2-4:
Model PO5000C
Sound pressure level (LpA ) : 81 dB(A)
Sound power level (LWA) : 92 dB (A)
Uncertainty(K):3dB(A)
Model PO6000C
Sound pressure level (LpA ):83dB(A)
Sound power level (LWA) : 94 dB (A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to 60745-2-4:
Model PO5000C
Workmode:polishing
Vibration emission (a
h, AP) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Model PO6000C
Workmode:polishing
Vibration emission (a
h, AP) : 7.0 m/s2
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.

Produkt Specifikationer

Mærke: Makita
Kategori: Polermaskine
Model: PO6000C

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita PO6000C stil et spørgsmål nedenfor, og andre brugere vil svare dig


Polermaskine Makita Manualer

Makita

Makita PW5000CH Manual

9 Juli 2025
Makita

Makita DPV300Z Manual

2 September 2024
Makita

Makita PO5000C Manual

25 August 2024
Makita

Makita PW5000C Manual

1 August 2024
Makita

Makita PO6000C Manual

20 Juli 2024
Makita

Makita DPO600Z Manual

19 Juli 2024

Polermaskine Manualer

Nyeste Polermaskine Manualer

Milwaukee

Milwaukee 5460 Manual

13 August 2025
Milwaukee

Milwaukee AGS 15-125 C Manual

8 August 2025
Fein

Fein WPO 15-25 E Manual

7 August 2025
Fein

Fein WPO 10-25 E Manual

7 August 2025
Bosch

Bosch GPO 14 E Professional Manual

6 August 2025
Eibenstock

Eibenstock ESM 1311 Set Manual

30 Juli 2025
Milwaukee

Milwaukee M18 Fuel 2684-20 Manual

15 Juli 2025
Milwaukee

Milwaukee 5540 Manual

15 Juli 2025
Milwaukee

Milwaukee 5455 Manual

15 Juli 2025
NEO Tools

NEO Tools 04-602 Manual

7 Juli 2025