Makita PW5000C Manual

Makita Polermaskine PW5000C

Læs gratis den danske manual til Makita PW5000C (12 sider) i kategorien Polermaskine. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Makita PW5000C, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Stone Polisher
PW5000C
PW5000CH
012115
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model PW5000C,PW5000CH
Spindle thread M14
Pad diameter max. 125 mm
Rated speed (n)/No load speed (n
0
) 2,000 - 4,400 min-1
Overall length 313 mm
Net weight 2.3 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE057-1
Intended use
The tool is intended for surface work with natural stone.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 85 dB(A)
Sound power level (L
WA) : 96 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : stone polishing
Vibration emission (ah,P) : 5.0 m/s2
Uncertainty (K) : 1.5 m/s2
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke: Makita
Kategori: Polermaskine
Model: PW5000C

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita PW5000C stil et spørgsmål nedenfor, og andre brugere vil svare dig


Polermaskine Makita Manualer

Makita

Makita PW5000CH Manual

9 Juli 2025
Makita

Makita DPV300Z Manual

2 September 2024
Makita

Makita PO5000C Manual

25 August 2024
Makita

Makita PW5000C Manual

1 August 2024
Makita

Makita PO6000C Manual

20 Juli 2024
Makita

Makita DPO600Z Manual

19 Juli 2024

Polermaskine Manualer

Nyeste Polermaskine Manualer

Milwaukee

Milwaukee 5460 Manual

13 August 2025
Milwaukee

Milwaukee AGS 15-125 C Manual

8 August 2025
Fein

Fein WPO 15-25 E Manual

7 August 2025
Fein

Fein WPO 10-25 E Manual

7 August 2025
Bosch

Bosch GPO 14 E Professional Manual

6 August 2025
Eibenstock

Eibenstock ESM 1311 Set Manual

30 Juli 2025
Milwaukee

Milwaukee M18 Fuel 2684-20 Manual

15 Juli 2025
Milwaukee

Milwaukee 5540 Manual

15 Juli 2025
Milwaukee

Milwaukee 5455 Manual

15 Juli 2025
NEO Tools

NEO Tools 04-602 Manual

7 Juli 2025