Makita SA5040C Manual

Makita Rysteplaster SA5040C

Læs gratis den danske manual til Makita SA5040C (16 sider) i kategorien Rysteplaster. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om Makita SA5040C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Sander

SA5040C

012905

ENGLISH (Original instructions)

SPECIFICATIONS

Model SA5040C

Abrasive disc diameter 125 mm

115 mm or 125 mm

Wheel diameter (Depending on the optional wheel guard)

Max. wheel thickness 6.4 mm

Spindle thread M14

Rated speed (n) / No load speed (n

) 7,800 min-1

Overall length 315 mm

Net weight 2.2 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 84 dB(A)

Sound power level (L

WA) : 95 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : disc sanding with anti vibration side

grip

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Work mode : disc sanding with normal side grip

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Work mode : surface grinding with anti vibration

side grip

Vibration emission (ah,AG

) : 4.0 m/s2

Uncertainty (K) : 1.5 m/s

Work mode : surface grinding with normal side

grip

Vibration emission (ah,AG

) : 5.0 m/s2

Uncertainty (K) : 1.5 m/s

ENG902-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Rysteplaster
Model:	SA5040C
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	110-240 V
Vægt:	2400 g
Produktfarve:	Black,Blue
Indbygget lys:	Ingen
Strøm:	1400 W
Strømkilde:	Vekselstrøm
Tomgang (min.):	2000 rpm
Tomgang (maks.):	7800 rpm
Bæretaske:	Ingen
Lydeffektniveau:	95 dB
Lydtryksniveau:	84 dB
Vibrationsudledning:	5 m/s²
Justerbar hastighed:	Ja
Usikkerhed i lydniveauet:	3 dB
Støvpose inkluderet:	Ingen
Usikkerhed - k:	1.5 m/s²
Slibesål type:	Rystepudser
Hjælpehåndtag:	Y, N
Slibeskivens diameter:	125 mm
Teleskop håndtag:	Ingen
Sandpapir inkluderet:	Ingen
Pudeholder inkluderet:	Ingen