Makita SG1251J Manual

Makita Sav SG1251J

Læs nedenfor 📖 manual på dansk for Makita SG1251J (12 sider) i kategorien Sav. Denne guide var nyttig for 15 personer og blev bedømt med 4.4 stjerner i gennemsnit af 8 brugere

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Wall Chaser

SG1251

015035

ENGLISH (Original instructions)

SPECIFICATIONS

Model SG1251

Wheel diameter 125 mm

Max. wheel thickness 2.1 mm

Rated speed 10,000 min

-1

Spindle thread M14

Overall length 350 mm

Net weight 4.5 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-8

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE026-1

Intended use

The tool is intended for cutting tracks in concrete walls

or cutting in ferrous materials or concrete drainage

channels with a diamond wheel but without using water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA ) : 97 dB (A)

Sound power level (L

WA) : 108 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : concrete cutting

Vibration emission (ah) : 5.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Sav
Model:	SG1251J
Bredde:	145 mm
Dybde:	350 mm
Højde:	190 mm
Vægt:	4500 g
Produktfarve:	Black,Grey
Indgangseffekt:	1400 W
Tomgang (maks.):	10000 rpm
Spindellås:	Ja
Strømbeskyttelsesfunktioner:	Overbelastning
Disk, diameter:	125 mm