Model: UR006G UR007G
Handle type Bike handle Loop handle
No load speed
(at each rotation speed level)
3: 0 - 7,000 min-1
2: 0 - 5,500 min-1
1: 0 - 4,600 min-1
Overall length
(without cutting tool and battery)
1,815 mm
Nylon cord diameter 2.4 mm
Applicable cutting tool and
cutting diameter
2-tooth blade
(P/N 198345-9)
255 mm
3-tooth blade
(P/N 195299-1)
255 mm
4-tooth blade
(P/N 196895-8)
255 mm
Nylon cutting head
(P/N 197993-1)
430 mm
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
255 mm
305 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 5.7 - 6.3 kg 5.3 - 5.9 kg
Protection degree IPX4
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01 / PDC1200
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
15m(50 )FT Keep distance at least 15 m.
Danger;beawareofthrownobjects.
Caution; kickback
Wear a helmet, goggles and ear protection.
Wear safety glasses.
Wear ear protection.