Makita UT2204 Manual

Makita Stavblender UT2204

Læs gratis den danske manual til Makita UT2204 (8 sider) i kategorien Stavblender. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Makita UT2204, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Power Mixer

UT2204

007128

ENGLISH (Original instructions)

SPECIFICATIONS

Model UT2204

No load speed (min

-1) 550

Mixing blade diameter 220 mm

Overall length 929 mm

Net weight 3.4 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE056-1

Intended use

The tool is intended for mixing wall materials, etc. (except

flammable materials)

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 83 dB(A)

Sound power level (L

WA) : 94 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-15

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Power Mixer

Model No./ Type: UT2204

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

Produkt Specifikationer

Mærke:	Makita
Kategori:	Stavblender
Model:	UT2204

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita UT2204 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stavblender Makita Manualer

15 September 2024

23 Juli 2024

20 April 2024

31 Marts 2024

14 November 2022

Stavblender Manualer

Nyeste Stavblender Manualer

Rane AM2 Manual

15 Juni 2025

Girmi SB04 Manual

14 Juni 2025

Midas HD96-AIR Manual

12 Juni 2025

Gourmia GBJ190 Manual

11 Juni 2025

Gourmia GHB2360 Manual

10 Juni 2025

9 Juni 2025

9 Juni 2025

9 Juni 2025

9 Juni 2025

8 Juni 2025