Marmitek Sense SI Manual

Marmitek Dør / vindue sensor Sense SI

Læs gratis den danske manual til Marmitek Sense SI (8 sider) i kategorien Dør / vindue sensor. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Marmitek Sense SI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Package content

Marmitek Smart me app Multi language user guide

1 x SenseSI door/window sensor

1 x SenseSI door/window sensor magnet

1 x Bag with 4 x screws, plugs and 2 x adhesive tape

1 x CR 2 Lithium 3V battery

1 x Quick install guide

Sense SI

Smar Wi-Ft i

door/window sensor

Indoor

wireless

open/close alarm

scene activation

battery

Safety Instructions

Please read these instructions thoroughly before you

use the device and keep them for future reference.

Only for indoor use.

• Do not expose the product to extremely high or low

temperatures, strong light sources or direct sunlight.

• This product is not a toy. Keep out of reach of

children.

• Dispose of batteries as chemical waste. Remove the

batteries when you are not using the system for a

longer period of time. Check the polarity (+/ ) of the -

batteries when inserting them in the product. Wrong

positioning can cause an explosion.

• Never open the product: the device may contain parts

with deadly voltage.

• Repairs or service should only be performed by

qualified personnel.

Requirements

This product requires a stable working Wi-Fi network

(username/ password) connected to the internet.

Installation of the Smart me app

Download and install the Marmitek Smart me app from

the Apple app store or the Google Play store.

Launch the Smart me app after installation is completed.

Follow the instructions and register for a new account.

Installation of the Sense SI

• Open the Smart sensor housing and pull the plastic

battery strip to activate the battery.

• The light indicator light should start flashing quickly. If

it’s not flashing, push the reset button for 5-6 seconds

until it begins flashing.

• Launch the Smart me app from your smart phone or

tablet.

• Click on the + (upper right corner) to add a new

device, confirm if the light bulb flashes quickly and

follow the instructions.

• Press Help button during installation for more

information or when installation fails.

Notes for using the product

• After the installation is completed you can configure

the Smart sensor by using the app.

• Check our website www.marmitek.com for more

details and how to use the Smart me products.

Technical specifications

Detection Open/ close

Trigger delay ~ 3 seconds

Battery life 2800 motion triggers

1 year @ 7 p/day

2 year @ 3 p/day

Standy life time 5 years

Wireless technology - Wi Fi 2.4GHz

Power Battery CR123A

Standy power 13uA

Dimensions 71 x 21 x 22 mm

40 x 11 x 11 mm

Declaration of Conformity

Hereby, Marmitek BV, declares that the

Sense SI is in compliance with the essential

requirements of the 2014/53/EU Directives.

Full Declaration of Conformity is available at

www.marmitek.com/en/declarations- -conformity/ of

More detailed user guide and instructions are available

on our website at www.marmitek.com

Produkt Specifikationer

Mærke:	Marmitek
Kategori:	Dør / vindue sensor
Model:	Sense SI
Bredde:	71 mm
Dybde:	21 mm
Højde:	22 mm
Antal pr. pakke:	2 stk
Velegnet til:	Dør/vindue
Produktfarve:	Grey, White
Forbindelsesteknologi:	Trådløs
Strømkilde:	Batteri
Batteritype:	CR2
Antal understøttede batterier:	1
Trådløs teknologi:	Wi-Fi
Grænseflade:	WLAN
Batteriets levetid:	60 måned(er)
Driftsfrekvens:	2400 Mhz
Låsetype:	Magnetisk
Nem at bruge:	Ja
Understøttelse af mobilapp:	Ja
Transmitter bredde:	40 mm
Transmitter dybde:	11 mm
Transmitter højde:	11 mm
Antal magnetike kontakter:	1 stk