Marshall Electronics CV610-U2-REMOTEBLK Manual

Marshall Electronics Ikke kategoriseret CV610-U2-REMOTEBLK

Læs gratis den danske manual til Marshall Electronics CV610-U2-REMOTEBLK (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Marshall Electronics CV610-U2-REMOTEBLK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Zooming

Press either of the ZOOM buttons.

When you perform pan/tilt operation while the camera is

in the telephoto mode, the moving speed of the image on

the screen may be a little jerky.

8.2 Operating Multiple Cameras with the

Infrared Remote Controller

1. Set the DIP Switch on the bottom of the camera to the

number of camera you want to operate to 1, 2 or 3.

(See bottom DIP Switch setting instruction)

2. Press the CAMERA SELECT button on the infrared

remote controller that corresponds to the number

set in step 1.

Then, you can operate the camera(s) speciﬁed by number.

Every time you operate the camera(s) using the infrared

remote controller, the CAMERA SELECT button pressed

in step 2 lights.

8.3 Adjusting the Camera

Focusing on a Subject

Focusing the camera on a subject automatically

Press the M button.

The camera focuses on the subject at the center of the screen

automatically.

Focusing the camera on a subject manually

After pressing the MENU button, press either the FAR or the NEAR

button to have the camera focus on the subject.

Shooting with Back Lighting

When you shoot a subject with a light source behind it, the subject

becomes dark. In such a case, press the BACK LIGHT button.

To cancel the function, press the BACK LIGHT button again.

The BACK LIGHT function is effective if MODE is set to FULL AUTO in the EXPOSURE menu of the

camera.

Note

CV610-U3-V2 Manual

www.marshall-usa.com 32

8.4 Storing the Camera Settings in Memory — the Presetting Feature

Memory (Preset)

Using the preset function, 6 sets of camera shooting conditions can be stored and recalled. 6 sets

of camera shooting conditions can be stored and recalled by using remote controller. Up to 128

presets via protocol programming.

This function allows you to achieve the desired status instantly, even without adjusting the following

items each time.

• Pan/Tilt Position

• Zoom Position

• Focus Auto/Manual

• Focus Position

• AE Mode

• Shutter control parameters

• Bright Control

• Iris control parameters

• Gain control parameters

• Exposure Compensation On/Off

• Exposure Level

• Backlight Compensation On/Off

• White Balance Mode

• R/B Gain

• Aperture Control

• WD Parameter

The settings stored using this function are recalled

when the power is turned on.

1. Adjust the position, zooming, focusing and backlighting

of the camera.

2. Position 1-6

While holding down the PRESET button, press any of the POSITION buttons,

1 to 6, in which you want to store the settings.

Produkt Specifikationer

Mærke:	Marshall Electronics
Kategori:	Ikke kategoriseret
Model:	CV610-U2-REMOTEBLK

Har du brug for hjælp?

Hvis du har brug for hjælp til Marshall Electronics CV610-U2-REMOTEBLK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Marshall Electronics Manualer

Marshall Electronics CV610-U2-REMOTEBLK Manual

2 Januar 2025

Marshall Electronics VAC-12HUC Manual

29 December 2024

Marshall Electronics AR-DM61-BT Manual

17 December 2024

Marshall Electronics CV7XX-HFH Manual

17 December 2024

Marshall Electronics VAC-23SHUC Manual

3 September 2024

Marshall Electronics AR-AM4-BG-2 Manual

3 September 2024

Marshall Electronics CV610-U3 Manual

3 September 2024

Marshall Electronics V-SG4K-3G Manual

5 August 2024

Marshall Electronics CV-RCP-V2 Manual

26 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 93699 Manual

16 Juni 2025

Eminence DELTA PRO-12A Manual

16 Juni 2025

Aiphone GT-303HB Manual

16 Juni 2025

Thermaltake Commander FP Manual

16 Juni 2025

Smart365 SM-02-031600 Manual

16 Juni 2025

Playtive IAN 426212 Manual

16 Juni 2025

Playtive IAN 311493 Manual

16 Juni 2025

Playtive IAN 285641 Manual

16 Juni 2025

Playtive IAN 292936 Manual

16 Juni 2025

OmniMount VB42 Manual

16 Juni 2025