Maxdata Favorit XS Manual

Maxdata Ikke kategoriseret Favorit XS

Læs gratis den danske manual til Maxdata Favorit XS (44 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Maxdata Favorit XS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/44

MAXDATA

FAVORIT XS Series

Handbuch Ma-Manual

nuel Handleiding Hånd-Manuale Handledningen

bok Vejledning Käyttöopas Használati Instrukcja

Handbuch Manuel Handleiding

Manual Manuale

Handledningen Vejledning

Håndbok Käyttöopas

Instrukcja Handbuch Manuel Használati Manual

Manuale Handledningen Vej-

Handleiding Håndbok

ledning Käyttöopas Instrukcja Használati Handbuch

Manual Manuale Handled- Manuel Handleiding

ningen Vejledning Håndbok Käyttöopas Instrukcja

Használati Handbuch Manuel Manual Manuale

Handleiding Håndbok Handledningen Vejledning

MAXDATA FAVORIT XS Series

User's Manual

FXSUK1.0

3MAXDATA FAVORIT XS Series

Table of Contents

Introduction 5

Technical Speciﬁcations ..................................................................................................... 6

Note ................................................................................................................................... 7

User note ...................................................................................................................... 7

Laser (service note) ...................................................................................................... 7

Use ............................................................................................................................... 8

Environmentally sound PC system ............................................................................... 8

Device Durability ........................................................................................................... 8

Take Back Guarantee ..................................................................................................... 8

Recyclable Device Construction .................................................................................... 8

Material Requirements for Plastic Cases and Case Parts ............................................. 9

Material Requirements for Printed Circuit Boards ........................................................ 9

Marking of Plastic Materials.......................................................................................... 9

Noise Emission ............................................................................................................. 9

Batteries ........................................................................................................................ 9

Information on the return of electrical and electronic waste in EU countries ..............10

Energy Consumption ...................................................................................................11

Deﬁnition of the MAXDATA warranty .............................................................................. 12

MAXDATA warranty period ......................................................................................... 12

Scope of the MAXDATA warranty ............................................................................... 12

Exclusions from the MAXDATA warranty .................................................................... 13

MAXDATA restriction to liability .................................................................................. 14

Governing law ............................................................................................................. 14

Data Backup ................................................................................................................ 15

Wireless LAN .................................................................................................................. 16

Additional safety notes for units with wireless LAN ........................................................17

CE-labelling for units with wireless LAN and Bluetooth ............................................. 18

Restrictions ..................................................................................................................... 19

France ......................................................................................................................... 19

Italy ............................................................................................................................. 19

Netherlands ................................................................................................................ 19

Radio frequencies for units with wireless LAN ............................................................... 20

Frequencies ................................................................................................................ 20

Legal requirements - exception clauses...................................................................... 21

Before Getting Started .................................................................................................... 22

Before Initial Operation 23

Contents .......................................................................................................................... 23

Positioning the Computer ................................................................................................ 23

Temperature and humidity .......................................................................................... 23

Connecting the computer ........................................................................................... 23

Avoiding risk of stumbling ........................................................................................... 23

Data storage media ..................................................................................................... 24

Avoid jarring ................................................................................................................ 24

Allow for ventilation .................................................................................................... 24

The PC in Detail 25

Elements of the PC ......................................................................................................... 25

Front Panel Components ............................................................................................ 25

The Rear View ............................................................................................................. 26

Connecting the Monitor .................................................................................................. 27

Connecting Peripheral Devices ........................................................................................ 28

Connecting the Power Adapter and the Power Cable ..................................................... 29

Switching the PC On ....................................................................................................... 30

Switching the System Off ................................................................................................ 31

The CMOS Battery .......................................................................................................... 31

Components of the PC 33

The Optical Drive ............................................................................................................. 33

The Card Reader (depending on the system conﬁguration) ............................................ 34

The Keyboard (optional) ................................................................................................... 35

Troubleshooting 39

Index 41

Table of Contents

5MAXDATA FAVORIT XS Series

Introduction

Congratulations on your purchase of the MAXDATA personal computer! We are conﬁdent

that it will meet your high expectations. This manual will familiarize you with your MAXDATA

PC’s components and features. We have taken all possible care to ensure that this manual

contains correct, accurate information. However, we cannot assume liability for any pos-

sible errors. Please refer to your dealer for reporting errors or comments. We appreciate

all feedback and are eager to incorporate any useful suggestions and improvements. All

rights reserved. No part of this manual may be reproduced, processed or distributed in any

form (print, photocopy, microﬁlm or any other process) or processed by an electronic sys-

tem without prior written permission of MAXDATA. Other brand names may be registered

trademarks and must be treated as such.

Technical Speciﬁcations

Your PC requires alternating current at 50/60 Hz. To connect the device to the power supply,

plug in the power cable. To disconnect it from the power supply, pull out the power cable.

Utilize an easily accessible grounded outlet.

The input voltage is: 100 - 240 V~.

Operating environment:

Temperature : 10°C - 35°C

Humidity : 30% - 70% relative humidity

(non-condensing)

Dimensions: Width / mm Height / mm Depth / mm

226 42 172

Please refer to the box label for more detailed information on the system’s speciﬁcations

(motherboard, graphics, sound etc.).

Introduction

7MAXDATA FAVORIT XS Series

Note

This device meets the EN 55022 and EN 61000-3-2 standards for interference emissions,

the EN 55024 standard for interference, and the EN 60950 electrical safety standard. Any

change made to this device without approval by the manufacturer voids any guarantee of

meeting these standards. In order to assure EMC compliance (electromagnetic compat-

ibility), please follow the corresponding guidelines in this manual.

User note

This device was carefully designed and tested to prevent radio interference. However, you

should note the following for external data cables: If you need to replace any of the data

cables speciﬁed by the manufacturer, be sure that the replacement cables have the same

shielding speciﬁcations as the original cable to prevent interference. Always use shielded

power lines and only use external devices that are CE certiﬁed.

No guarantee for meeting these standards can be maintained if you do not conform to the

above guidelines.

Laser (service note)

Caution!

Laser radiation when the cover is open!

This laser radiation is contained in the CD drives. When dismantling and /or opening this

drive, be careful:

• not to look into the beam, not even with optical instruments

• not to expose yourself to the beam

• to avoid eyes or skin being exposed to direct or scattered beam.

Failure to observe these guidelines can in the worst case lead to permanent blindness.

The built-in CD drives contain no user-serviceable or reparable parts. CD drives are to be

repaired solely by the manufacturer. Laser products of laser classes 1 to 3B may be used

in the product. When the housing is unopened the device meets the requirements of laser

class 1. By opening the device, laser devices up to laser class 3B may be accessible. The

built-in CD drives contain no user-serviceable or reparable parts. CD-ROM drives are to be

repaired by authorized technicians.

9MAXDATA FAVORIT XS Series

Material Requirements for Plastic Cases and Case Parts

• All plastics used for the case are manufactured without the use of dioxins and furans.

• An independent testing laboratory in Germany has tested and approved the character-

istics of the plastics used.

Material Requirements for Printed Circuit Boards

• All our suppliers have ensured us that their circuit boards do not contain PCB (poly-

bromite biphenyl), PBDE (polybromite diphenylether) or chlorinated parafﬁn.

Marking of Plastic Materials

• All plastic parts of this device are marked in accordance with ISO 11469. This ensures

a problem free separation of the different materials when recycling.

Noise Emission

This PC meets the requirements for noise emissions according to EN 27779 and falls below

the following values:

Operation mode Sound power level LW (dB(A))

(according to ISO 9296))

Idle < 48

Drive operation < 55

Batteries

This device does not contain batteries containing heavy metals. The lithium batteries used

have an extremely long life span (> 10 years). Please consult the notes in the manual con-

cerning servicing, replacement or disposal of the battery.

Information on the return of electrical and electronic waste

in EU countries according to Directive 2002/96/EC, and its im-

plementation in respective national regulations

a) Reason and Purpose of Separate Collection

Users of electrical and electronic equipment are required to dispose of used devices sepa-

rately. Electrical and electronic equipment must not be disposed of together with unsorted

municipal solid waste (domestic refuse), as it contains a range of dangerous elements that

cause problems for waste management. Separate collection from regular municipal waste

is a prerequisite for the special treatment and appropriate recycling of electrical and elec-

tronic waste. This is essential, as many components of electrical and electronic devices are

damaging to the environment if they are not disposed of professionally. Disposing of the

devices along with unsorted municipal waste can cause harmful substances to enter the

waste ﬂow. The consequence would be a considerable burden on the environment.

b) Signiﬁcance the ‘Crossed-Out Wheelie Bin’

The crossed-out wheelie bin is the symbol for separate collection.

Electrical and electronic equipment marked with this symbol must not be

disposed of to-gether with municipal sorted waste (domestic refuse). Such

items can be handed in free of charge at public collection points.

c) Reuse, Recycling and Recovery

Electrical and electronic waste contains valuable raw materials such as iron, aluminum

and copper. These components must be treated selectively. A separate collection and a

selec-tive treatment are the basis for environmentally-friendly disposal and protection of

human health.

According to the particular terms, manufacturers are obligated to assume the costs associ-

ated with disposing of these devices as well as other obligations. This is to promote the

chief objectives of reuse and recycling. For this to be possible, consumers must dispose of

used devices that are no longer needed at communal collection points. Actively using these

return and collection systems contributes to the reuse, recycling and recovery of electrical

and electronic equipment and protects the environment.

d) Weight

Information on the weight of the acquired product can be found on the item list as well as

on the packaging.

Introduction

11MAXDATA FAVORIT XS Series

Energy Consumption

Our workplace computers are specially designed to save energy. The power consumption

listed on the label refers to the maximum possible power consumption, that is, if the com-

puter is fully expanded and receiving 100% of the allowed output from the power supply.

The devices can be disconnected from an external power source for at least 4 weeks without

losing any functionality.

You can specify the individual time settings for the energy-saving mode in the BIOS setup

The only way to prevent any energy consumption at all is to disconnect the workstation

from the power supply (by disconnecting the main plug).

Deﬁnition of the MAXDATA warranty

The MAXDATA warranty covers all failures resulting from defective components and manu-

facturing defects that occur within the product speciﬁc warranty period. The warranty period

begins on the date of purchase (date of original customer invoice).

Please be aware that in order to maintain your warranty claim the product concerned has

to be received by MAXDATA together with the serial number and a copy of the original

customer invoice within the warranty period.

MAXDATA‘s obligation under the warranty is restricted to repairing or exchanging defective

components.

Defective components removed during repair process become the property of MAXDATA.

Components replaced within warranty coverage assume the remaining valid warranty period

of the system.

MAXDATA warranty period

The standard warranty period for all MAXDATA products is 3 years, except for the notebooks

of the ECO and M-BOOK series, for which the standard warranty period is 2 years. The type

of standard warranty varies with the product and can be seen in detail in the description of

warranty types and the warranty summary. It is possible to extend the standard warranty

to include additional service packages.

Scope of the MAXDATA warranty

Scope of warranty for Belinea monitors

MAXDATA‘s obligation under the warranty is limited to failures resulting from defective

components and manufacturing defects, defects in the CRT, panel and background lighting

for electrical errors (please also refer to the term deﬁnition and liability restriction).

Scope of the warranty for MAXDATA Notebooks/PCs/FUSION Workstations/

Thin Clients/PLATINUM Servers

MAXDATA‘s obligation under the warranty is restricted to MAXDATA‘s choice of either the re-

pair or replacement by similar or better components of parts determined to be defective.

Scope of warranty for peripheral devices

MAXDATA has no warranty obligation for these products; instead there are product-speciﬁc

manufacturer warranties. The terms of these manufacturer warranties are at least 12 months,

starting from the time MAXDATA delivers them to the specialist reseller. The manufacturer

guarantees the presence of the features described in the product documentation and that

the materials and processing will be free of defects for the stated period.

Scope of warranty for spare parts

MAXDATA has no warranty obligation for these products, but product-speciﬁc warranty

obligations of the manufacturer. The terms of these manufacturer warranties can be asked

for at the manufacturer concerned.

Introduction

13MAXDATA FAVORIT XS Series

Exclusions from the MAXDATA warranty

The MAXDATA warranty does not cover damage of any kind that results

from:

• The use of peripheral devices

• Improper use/operating faults

• Non-adherence to the user instructions

• Attempted repairs by the customer or third-parties without authorisation by

MAXDATA

• Defective maintenance by third parties

• Device defects due to power failure, heat losses, missing EMC (electro-magnetic

compatibility) cabling or similar reasons

• Accidents, storms, lightening, ﬁre, water/other liquids, other natural catastrophes,

theft, riots, plundering, the effects of war or other instances of acts of god

• The use of third-party components

• Non-authorised system changes

• BIOS versions/ﬁrmware updates/programmes to remove defects of all kinds (e.g.

service packs, bug-ﬁxes, hot-ﬁxes)

• Resetting safety functions, deletion of passwords etc.

• Loss of customer-speciﬁc data or software from repair and installation processes

• Improper use of machine capacity or output

• Inappropriate customer operating environment

The MAXDATA warranty also does not cover the following:

• MAXDATA products from which the category plates, serial numbers, part numbers on

the machine of machine parts have been removed or changed

• Decline in rechargeable battery capacity after the end of the 6 month warranty period

• The provision and installation of BIOS, driver or software updates/upgrades

• The new installation of software/operating systems that are no longer able to run (e.g.

because of the deletion of system-relevant ﬁles, incorrect system settings or self-

copying programs, e.g. computer viruses)

• Wear and tear on data storage media, LCD background lighting, CRTs on CRT moni-

tors, picture tube burn-in or loss of brightness

• MAXDATA products for which the warranty seal has been broken by entities other

than MAXDATA or those authorised by MAXDATA

• Breaks and scratches on TFT panels and CRT displays

• Damage through use of force and external impact respectively

• Spots on the panel caused by external impacts

• Colour spots resulting from falls

• Error class 2 pixel errors (please note the information on ISO 13406-2 on the website

of the MAXDATA subsidiary concerned).

If the device received by MAXDATA demonstrates two defects and only one of these is

covered by the MAXDATA warranty claim, the customer only has the right to repair for the

damage to his device covered by the warranty.

In this case MAXDATA reserves the right to offer the customer several options on resolution

in the form of a quotation and to charge the relevant processing costs.

This also applies to those devices for which upon receipt, it is found that they are not covered

by the warranty. In these cases, MAXDATA reserves ownership of the exchange device

provided and is entitled to demand its return.

MAXDATA reserves the right to charge costs incurred for unsuccessful attempts to collect

a device that has been registered as defective from the customer.

If an exchange device is not provided in spite of a period having been set, MAXDATA is entitled

to charge the net sales price as per the current price list plus the processing costs incurred.

The customer has the right to provide evidence for the existence of lower damages.

MAXDATA restriction to liability

MAXDATA expressly excludes customer claims that go beyond the warranty conditions if

there is no obligation of liability imposed on MAXDATA by the laws of the country where

the device was bought. This also applies in particular with regard to claims for damages as

a result of default, damages for claims arising as a result of defects, loss of proﬁt, transport

damage that was not registered within a period of 6 days after receipt of the goods, loss

of data or information through repair processes or damage resulting from interruption to

operations.

Governing law

All rights and duties are subject to the law of the country in which the MAXDATA product

was purchased. The Agreement on Contracts for the International Sale of Goods (CISG) is

not applicable.

Introduction

15MAXDATA FAVORIT XS Series

Data Backup

The responsibility for complete data backups, including of applications and operating system

software remains exclusively with the customer. The data must be backed up before the

warranty claim is made. MAXDATA excludes liability for any data or information lost for this

reason during a warranty claim.

For further details regarding the MAXDATA warranty conditions please refer to

www.maxdata.co.uk.

Wireless LAN

(wireless network - abbreviation = WLAN)

Your PC may contain a wireless LAN module (optional). This module allows you to set up a

wireless-based network, and to connect to an existing wireless network. It works according

to the IEEE802.11a+b+g standard.

WLAN technology allows users to set up wireless connections inside a local area (e.g. in

a company or campus building, or in a public building such as an airport). WLANs can be

used in temporary ofﬁces, in locations where it is not possible to set up extensive cable

installations, or to extend an existing LAN so that users in different parts of a building can

work at different times.

There are two different ways to operate a WLAN. In ﬁxed WLANs, wireless stations (devices

with radio network cards or external modems) set up connections with wireless access

points, which act as bridges between the stations and the existing network backbone. In

Peer-to-Peer (ad hoc) WLANs several users can set up a temporary network within a limited

area such as a conference room, without using access points, and providing there is no

need to use network resources.

In 1997 the IEEE conﬁrmed the standard 802.11 for WLANs; this set a data transfer rate of

from 1 to 2 Mbit/s (Megabits per second). Under 802.11a+b+g, the new governing stand-

ard, the maximum data transfer rate is 54 Mbit/s over a frequency band of 2.4 or 5 GHz

(Gigahertz).

Introduction

17MAXDATA FAVORIT XS Series

Additional safety notes for units with wireless LAN

If a wireless LAN module is integrated in your PC, it is essential

that you observe the following safety information when using your

PC:

• Switch off the PC when you are in an aircraft or while driving a car.

• If you are in a hospital, an operating room or close to an electronic

medical system, switch off the wireless components in the PC! The

radio waves which are transmitted could disrupt the working of the

medical equipment.

• Keep the PC at least 20 cm away from a heart pacemaker, other-

wise there is a risk that the radio waves could disrupt the normal

working of the pacemaker.

• The radio waves which are transmitted could give rise to interfer-

ence noise in hearing aids.

• When its radio components are switched on, do not place the PC

close to inﬂammable gases or in an environment which could be at

risk of explosion (e.g. paint shop), since the radio waves which are

transmitted could set of a ﬁre or an explosion.

• The range of the wireless connection depends on the environmen-

tal and other ambient conditions.

• When transferring data over a wireless connection, unauthorized

Third Parties can also receive the data.

MAXDATA Computer GmbH is not responsible for disruptions to radio or television recep-

tion which are caused by unauthorized alterations to this unit. MAXDATA also accepts no

responsibility for the replacement or the exchange of connecting cables and units which

were not speciﬁed by MAXDATA Computer GmbH. The user alone is responsible for the

elimination of disruptions caused by this type of unauthorized alteration; he is also respon-

sible for the replacement or the exchange of the units.

CE-labelling for units with wireless LAN and Bluetooth

As delivered, this device complies with the requirements of the Guideline 1999/5/EG of the

European Parliament and of the Council dated the 9. March 1999 concerning radio equipment

and telecommunications facilities, and the mutual recognition of conformity.

This PC may be used in Belgium, Denmark, Germany, Finland, France, Greece, Great Britain,

Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Sweden, Switzerland, Spain,

Iceland, Liechtenstein and Norway.

Current information on any possible restrictions in its operation can be obtained from the

appropriate authorities in each country. If your country is not included in the above list, then

please contact the appropriate supervising authority, in order to check whether the use of

this product is permitted in your country.

Belgium - www.bipt.be

Denmark - www.tst.dk

Germany - www.regtp.de

Finland - www.ﬁcora.ﬁ

France - www.art-telecom.fr

Greece - www.eett.gr

England - www.oftel.gov.uk

Ireland - www.comreg.ie

Italy - www.agcom.it

Luxembourg - www.etat.lu/ILT

Netherlands - www.opta.nl

Austria - www.rtr.at

Portugal - www.urt.gov.pt

Sweden - www.pts.se

Switzerland - www.bakom.ch

Spain - www.cmt.es

Iceland - www.pta.is

Liechtenstein - www.ak.li

Norway - www.npt.no

Introduction

19MAXDATA FAVORIT XS Series

Restrictions

France

Restricted frequency range: In France, you may only use channels 10 to 11 (2457 MHz or

2462 MHz). It is forbidden to use the unit outside of enclosed areas.

Info: www.art-telecom.fr

Italy

An ofﬁcial authorization is also required to use the unit in internal areas. For more detailed

information about the necessary procedure to do this, please contact your provider. It is

forbidden to use the unit outside of enclosed areas.

Info: www.agcom.it

Netherlands

A licence is required to use the unit in the open. For more detailed information about the

procedure to be followed for this, please contact your provider.

Info: www.opta.nl

Radio frequencies for units with wireless LAN

The following information was correct at January 2002. You can obtain current information

from the appropriate authorities in your country (e.g. www.regtp.de).

Frequencies

Radio network cards and adapters are designed in accordance with IEEE-Standard 802.11b+g

for use in the ISM frequency band (Industrial, Scientiﬁc, Medical) between 2.4 and 2.4835

GHz. Because of the DSSS-procedure (Direct Sequence Spread Spectrum), each of the 11

usable radio channels takes up a width of 22 MHz; this means that up to three, independent

channels are available (e.g. 3, 8 and 11). The following table lists the authorised channels

in your country:

Channel MHz Europe, R&TTE France, R&TTE

12412 X

22417 X

32422 X

42427 X

52432 X

62437 X

72442 X

82447 X

92452 X

10 2457 X X

11 2462 X X

In addition, the integrated radio network card supports the standard 802.11a. For more in-

formation regarding 5 GHz band frequencies authorized in your country, please contact your

respective appropriate authority.

Introduction

21MAXDATA FAVORIT XS Series

Legal requirements - exception clauses

Exception Clauses For Units With Wireless LAN

The installation and use of an unit with Wireless LAN may only take place when in accordance

with the instructions contained in the user documents. The user documents are included

in the material supplied with the product. All alterations or modiﬁcations made to this unit

which are not expressly authorised by the manufacturer may lead to cancellation of the right

of the user to operate the unit. The manufacturer is not liable for radio disruptions during

the reception of radio and television signals which are due to non-authorised alterations

to the unit or to the exchange or connection of cables and accessories, where these are

not in accordance with the recommendations of the manufacturer. It is the responsibility

of the user to remove any interference which may arise as a result of any non-authorised

alterations, or the addition or replacement of components. Neither the manufacturer nor

his authorised dealer and wholesaler are liable for damages or breaches of legal regulations

which result from an infringement of these guidelines.

Before Getting Started

This manual uses some symbols to facilitate the user’s orientation and to highlight points

of importance.

Degree of

danger

Damage to

persons

Damage to

property

Use with:

×Immediate threat of danger;possible

consequences: death or life-threaten-

ing injury.

×Potentially dangerous situation; pos-

sible consequences: light or moder-

ate injury.

×Potentially harmful situation; pos-

sible consequences: the product or

anything nearby may be damaged.

Useful information and recommen-

dations that may make using your

system easier.

Introduction

23MAXDATA FAVORIT XS Series

Before Initial Operation

Contents

Before you begin the installation of your PC, make sure that you have all the parts. If anything is

missing from the listed and illustrated packing list, please contact your dealer immediately

• System unit

• Keyboard (optional)

• Mouse (optional)

• Power cable and power adapter

• Operating system

• Software

• Users's manual/Quick start guide (optional)

• DVI VGA adapter (optional)

Depending on your system model, your PC may be different than the ones shown in this

manual. When the differences are signiﬁcant, the various options will be shown.

Positioning the Computer

Please take note of the following criteria for creating a practical and safe workplace when

setting up your computer:

Temperature and humidity

The computer can be used anywhere the temperature is suitable for people. However,

rooms with humidity over 70%, and dusty or dirty areas are not appropriate. In addition, do

not expose the PC to temperatures over +35°C or under +10°C.

Make sure that you avoid temperature changes that could lead to condensation. If moisture

has accumulated on the surface of your computer, wait until the moisture has dried com-

pletely (approximately one to two hours), before you switch the device on.

The operational reliability of a device that has been exposed to condensation cannot be

guaranteed.

Connecting the computer

Make sure that the cables connecting the PC to peripheral devices are not under tension.

Avoiding risk of stumbling

Make sure that all power and connection cables are positioned so that they are not trip hazards

24 Before Initial Operation

Data storage media

When you save data to your PC’s hard disk or to a ﬂoppy disk, it is stored as magnetic

information on the medium. Make sure that data is not damaged by magnetic or electro-

magnetic ﬁelds.

Avoid jarring

Because the electronics in your computer can be damaged by jarring, no mechanical devices

should be placed on the same surface as the PC. This is especially important for impact

printers whose vibrations could damage the hard disk.

Allow for ventilation

There is a fan on the back of the PC that maintains the proper temperature inside the case.

In order for it to function properly, the ventilation slots must not be blocked. Blocking them

would cause the inner components to be damaged by high temperatures. That is why it is

not appropriate to install the PC in a shelf unit or drawer.

25MAXDATA FAVORIT XS Series

All data that has not been saved will be lost.

The behaviour of the on/off button and the power LED depends on the

BIOS settings and the operating system.

1. Eject button for optical

media.

2. Card reader (depending

on the system conﬁgura-

tion for 3 or 4 different

kinds of memory cards).

3. Front USB port. USB

peripheral devices can be

connected here.

4. Optical drive (depending

on the system conﬁgura-

tion, e.g., DVD+/-RW or

CD-RW).

The PC in Detail

Elements of the PC

All components necessary to operate your PC system are located on the front panel.

Front Panel Components

5. On/Off button with power LED. This button has several functions:

a. Pressing this button switches the computer on.

b. If you brieﬂy press the button while the computer is switched on, current operating

systems will shut the computer down.

c. Pressing the button for longer than four seconds switches the computer off.

The Rear View

The ports on the rear side of the workstation can vary slightly depending on the system

conﬁguration. Because of the wide product range, the usual ports are shown here.

1. IEEE 1394. Depending on the system conﬁguration, the IEEE 1394 can be used as a

high-speed I/O port for transferring data in real time (e.g., from a digital camera).

2. Modem port. Depending on the conﬁguration, the system may include a built-in 56K

modem that can be connected to the telephone network using this port.

3. TV-IN. Depending on the system conﬁguration, a TV antenna can be attached in order

to receive television signals.

4. AV-IN. Depending on the system conﬁguration, this connection can be used for the

transferral of audio and video signals.

5. Microphone socket.

6. Loudspeaker/headphones socket.

7. DVI-I port. This ‘Digital Video Interactive Integrated’ connector can be used to attach a

monitor.

8. Network connection socket. Depending on the system conﬁguration, the integrated

network component allows the computer to be connected to a network or to DSL/In-

ternet. The connection is established via an Ethernet network cable equipped with

RJ45 plugs.

9. TV port (S-Video). Depending on the system conﬁguration, S-Video-capable devices

can be connected using this port (e.g., a television).

10./11. USB ports. USB peripherals (e.g., mouse devices, printers, scanners or digital

cameras) can be connected here.

12. Power adapter socket. This is where the power cable is connected to the power

adapter.

The PC in Detail

27MAXDATA FAVORIT XS Series

Any monitor which complies with the VGA graphics standard

can be connected to your workstation. The monitor connector

is located on the rear side of your PC.

If you use an old monitor, make sure to compare the tech-

nical details of the monitor with the integrated graphics

component.

The computer and the monitor must be switched off when

being connected, as otherwise the hardware may be dam-

aged.

Connecting the Monitor

Carefully insert the

connection cable into

the suitable port to

avoid damaging the

plug or socket.

If the monitor is not

able to process the

frequencies from the

graphics card, it could

be destroyed!

DVI port

DVI-I cable

DVI-I port

VGA port

DVI VGA

adapter

(optional)

On the rear side of the computer you will ﬁnd the USB port for connecting a USB keyboard,

mouse or other USB peripherals (e.g., printers, scanners or digital cameras).

Just plug the device into a free USB port.

Connecting Peripheral Devices

The PC in Detail

Please make sure to read the manual before attempting to connect the

printer. For example, you may ﬁrst need to install the drivers. Note

that before you use the printer for the ﬁrst time, you must remove the

transport protection and insert the ink or toner cartridge. Consult the

printer manual for further information. Often you must also install the

appropriate printer driver. You can ﬁnd the necessary information in the

printer manual.

29MAXDATA FAVORIT XS Series

The PC has a power adapter which can be operated with 100–240 V AC. Connect the

power adapter using the attached cable with the appropriate socket on the PC. Then plug

one end of the power cable into the external power adapter socket and the other end into

an appropriate earthed wall outlet.

Connecting the Power Adapter and the Power Cable

The power adapter

contains no service-

able parts. Never open

the power adapter

– risk to life!

You could receive a

deadly electric shock.

The external power

adapter as well as the

power cable are spe-

cially designed to suit

the FAVORIT PC. Please

do not use any other ac-

cessories as they could

damage the system.

Before starting the computer, you should switch on the monitor, printer, modem etc. This

ensures that the operating system recognizes the connected devices and integrates them

accordingly.

Switching the PC On

Turn on your PC by brieﬂy pressing the ON/OFF button on the front.

The PC carries out an internal self-test. If errors are detected during this test, these are

displayed on the screen if possible. After successful completion of the PC self-test, the

operating system (if installed) is started.

The PC in Detail

31MAXDATA FAVORIT XS Series

There is a special type of memory on the motherboard of your

PC which must not be erased, in contrast to the normal RAM.

This memory is called CMOS RAM. It stores the internal con-

ﬁguration settings of BIOS, as well as important parameters

for the system clock and calendar. In order to maintain the

contents of CMOS RAM even when the PC is turned off, it

is constantly supplied power from a battery.

To change the battery, please use the following instructions

and take note that this procedure can differ depending on the

mainboard of the PC:

1. Slide the safety latch to the side.

2. Lift and pull the battery from the holder.

3. Insert the new battery.

4. Lock the battery in place.

Don‘t dispose of batteries in a ﬁre – they may explode.

Batteries and rechargeable batteries do not belong in the

household garbage.

They are accepted free of charge by manufacturers, dealers

or their representatives for recycling or disposal.

Switching the System Off

The CMOS Battery

The switch off procedure of the system depends on its operating system.

Some operating systems shut down the PC completely and switch it off.

If your OS does not support this function, please press and hold the ON/OFF switch for longer

than 4 seconds in order to switch the system off. In case you are not going to use the system

for an extended period, please unplug the power cable at the back of your system.

When changing the

battery it must not

be allowed to short

circuit or be inserted

with reversed polar-

ity. A battery which is

inserted with reversed

polarity may explode

or cause damage to

the electronics on the

motherboard.

Only use the battery

type recommended by

the manufacturer. You

can purchase new bat-

teries from your dealer.

Produkt Specifikationer

Mærke:	Maxdata
Kategori:	Ikke kategoriseret
Model:	Favorit XS

Har du brug for hjælp?

Hvis du har brug for hjælp til Maxdata Favorit XS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Maxdata Manualer

Maxdata Favorit XS Manual

23 August 2024

Maxdata Quantum PX502 Tape Library Manual

9 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

American Audio SENSE8 Manual

14 August 2025

Adj Vortex 1200 Manual

14 August 2025

Midea 24DME4R109 Manual

14 August 2025

Eliminator Lighting Aqua LED Manual

14 August 2025

Aukey PB-N42 Manual

14 August 2025

American Audio Mega Pixel LED Manual

14 August 2025

American Audio Accu Scan 250 Manual

14 August 2025

Tenda RP3 Pro Manual

14 August 2025

American Audio Galaxian Manual

14 August 2025

Adj FREQ Matrix Manual

14 August 2025