Mean Well GC220A24-R7B Manual

Mean Well Batterioplader GC220A24-R7B

Læs gratis den danske manual til Mean Well GC220A24-R7B (4 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Mean Well GC220A24-R7B, eller vil du spørge andre brugere om produktet?

Side 1/4
Notes On Operation:
1.The charger should be assembled in the place with good ventilation and low moisture.
Exposure to the rain or snow is strictly prohibited.
2.Wires connecting between the charger and batteries should be as short as possible since the high voltage drop on the wires will
increase the time required to fully charge the batteries.
3.The charger is suitable for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese).
Make sure the charging voltage and charging current are suitable for the batteries you are using. Modification for charger
specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
4.If the batteries need to connect in series for charging, old batteries are not suggested to be used with new ones or the lifetime of
batteries may reduce because of the unbalance charging voltage distribution on new and old batteries.
5.Please turn off the charger before connecting or disconnecting the wires.
6.The charger has a 2-year worldwide warranty, however, damages from misusing the charger will not be included in the coverage of
warranty.


Produkt Specifikationer

Mærke: Mean Well
Kategori: Batterioplader
Model: GC220A24-R7B

Har du brug for hjælp?

Hvis du har brug for hjælp til Mean Well GC220A24-R7B stil et spørgsmål nedenfor, og andre brugere vil svare dig