Mercusys MB235-4G Manual

Mercusys Router MB235-4G

Læs gratis den danske manual til Mercusys MB235-4G (2 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Mercusys MB235-4G, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick Installation Guide

Wireless 4G LTE Router

Images may dier from actual products.

Note: Images may dier from

actual products.

1. Connect the Hardware

a. With the gold contacts facing down, insert the

Nano SIM card into the slot until you hear a click.

b. Connect the power adapter to the router.

3. Enjoy the Internet2. Check the LED

• Wired

Connect your computer to the router's LAN port via an

Ethernet cable.

• Wireless

a. Find the default SSID

(network name) and

wireless password

printed on the label at the

bottom of the router.

b. Click the network icon of your computer or go to the

Wi-Fi settings of your smart device, and then select

the SSID to join the network.

Customize the 4G LTE Router

1. Make sure your computer is connected to the router

(wired or wireless).

2. Launch a web browser and type in http://mwlogin.net.

Create a password for future logins.

Note: If the login page does not appear, please refer to .FAQ-Q1

3. Follow the step-by-step instructions of the Quick

Setup to complete the initial configuration.

Note: This router can function as a wireless router in Wireless Router

Mode, compatible with cable, ber, and DSL modems. For more

information, please refer to the user guide at

https://www.mercusys.com/support/.

Wir

SSI

Wireless Password/PIN: XXXXXXXX

SSID:MERCUSYS_XXXX

LED Indicators

LED Status Indication

Blinking Green

Solid Green

Solid Orange

O

Blinking

O

The router is starting up, upgrading

rmware, or establishing a WPS connection.

The router is working properly.

Wi-Fi is o.

Power is o.

Indicates the signal strength received from

the mobile internet network. More lit LEDs

signify a better signal strength.

There is no mobile internet signal.

If you want to customize your router settings, follow

the steps below.

Congure the Router via MERCUSYS App

3. Tap and select your device model. LET’S BEGIN

Follow the step-by-step instructions to complete

the setup and connect to the internet.

Note: If you don’t have an account, create one rst.

2. Open the app and log in with your MERCUSYS ID.

1. Download the MERCUSYS app via the app store or

scan the QR code.

Device is connected via the Ethernet cable.

Device is connecting via the Ethernet cable.

No device is connected via the Ethernet

cable.

The router is connected to the internet.

The router is not connected to the internet.

Power Adapter

*The LEDs may vary by product.

Wait until the internet LED ( or ) turns on. This

conrms your router is successfully connected to the

internet.

Notes:

• Make sure your SIM card is unlocked. If not, log in to the router's

web management page and go to Advanced > Network > PIN

Management to verify.

• If the LED does not turn on (no internet), refer to FAQ-Q2.

For a better internet connection, make sure the 2-bar or 3-bar

signal LED is lit. Otherwise, try relocating the router to a spot

that may receive a stronger mobile network signal, such as near

a window.

•

FAQ (Frequently Asked Questions)

Q1. What should I do if I cannot access the web

management page?

• Reboot your router and try again.

• If the computer is set to a static IP address,

change its settings to obtain an IP address

automatically.

• Make sure http://mwlogin.net is correctly entered

in the web browser.

• Use another web browser and try again.

• Disable and enable the active network adapter in

use.

Q2. What should I do if I cannot access the

internet?

• Verify that your SIM card is an LTE or WCDMA

card.

• Verify that your SIM card is in your internet service

provider’s service area.

• Verify that your SIM card has sufficient credit.

• Log in to the router's web management page, and

check the following:

1) Go to Advanced Network PIN Management > > to

verify if a PIN is required. If it is, enter the correct

PIN provided by your ISP.

2) Go to Advanced Network Internet > > to verify the

parameters provided by your ISP are correctly

entered. If they are incorrect, click Create Profile

and enter the correct parameters, then select the

new profile from the Profile Name list.

3) Go to Advanced > Network > Data Settings to

verify if the used data exceeds the allowance. If it

does, click Correct and set the used data to 0

(zero), or disable .Data Limit

4) Go to Advanced Network Internet > > to verify

that is enabled. If it is not, enable it to Mobile Data

access the internet.

5) Confirm with your ISP if you are in a roaming

service area. If you are, go to Advanced Network >

> Internet to enable Data Roaming.

Q3. How do I restore the router to its factory

default settings?

• With the router powered on, press the RESET

button on the side panel and the LED starts

blinking. Wait until the router reboots.

• Log in to the router's web management page, go

to Advanced System Backup & Restore > > ,

and click Factory Restore. Wait until the reset

process is complete.

Q4. What should I do if I forget my wireless network

password?

• The default wireless password is printed on the

product label of the router.

• Connect a computer directly to the router via an

Ethernet cable. Log in to the router's web

management page and go to Wireless to retrieve

or reset your wireless password.

Safety Information

• Keep the device away from water, re, humidity or hot

environments.

• Do not attempt to disassemble, repair, or modify the

device. If you need service, please contact us

• Do not use damaged charger or USB cable to charge

the device.

• Do not use any other chargers than those

recommended.

• Do not use the device where wireless devices are not

allowed.

• Adapter shall be installed near the equipment and

shall be easily accessible.

MERCUSYS hereby declares that the device is in

compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU,

2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be

found at https://www.mercusys.com/en/ce

MERCUSYS hereby declares that the device is in

compliance with the essential requirements and other

relevant provisions of the Radio Equipment

Regulations 2017.

The original UK Declaration of Conformity may be

found at https://www.mercusys.com/support/ukca/

For technical support, replacement services, user

guides, and other information, please visit

https://www.mercusys.com/support/.

Produkt Specifikationer

Mærke:	Mercusys
Kategori:	Router
Model:	MB235-4G

Har du brug for hjælp?

Hvis du har brug for hjælp til Mercusys MB235-4G stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Router Mercusys Manualer

Mercusys MB235-4G Manual

25 Juli 2025

Mercusys MB115-4G Manual

11 Juli 2025

Mercusys MR37BE Manual

4 Juli 2025

Mercusys MB135-4G Manual

3 Juli 2025

Mercusys MR25BE Manual

25 Februar 2025

Mercusys MR20 Manual

4 September 2024

Mercusys MR62X Manual

1 September 2024

Mercusys MB230-4G Manual

30 August 2024

Mercusys MW330HP Manual

29 August 2024

Mercusys MW300D Manual

1 August 2024

Router Manualer

Nyeste Router Manualer

TP-Link TL-MR105 Manual

25 Juli 2025

TRENDnet TEW-831DR Manual

25 Juli 2025

Mikrotik CubeSA 60Pro ac Manual

25 Juli 2025

TP-Link VX220-G2v Manual

25 Juli 2025

TP-Link XZ000-G3 Manual

25 Juli 2025

TRENDnet TEW-829DRU Manual

25 Juli 2025

Mikrotik LtAP LTE kit Manual

25 Juli 2025

Asus ZenWiFi XD6 Manual

25 Juli 2025

Mikrotik hEX refresh Manual

24 Juli 2025

Arris SURFboard G20 Manual

20 Juli 2025