Metra JP-1019 Manual

Metra Højttaler JP-1019

Læs gratis den danske manual til Metra JP-1019 (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Metra JP-1019, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 6/4/24 INSTJP-1019
I N S TA L L AT I O N I N S T R U C T I O N S
JP-1019
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
key to ignition.
PRODUCT FEATURES
• Designed to adapt the factory
4" with up to a 6"-6.75" speaker
with a tweeter option
• Retains the OE dome light
• Speaker depth: 4"
• Mounting plate/cutting template
included
• Hardware included
• Harness included
WHAT’S IN THE BOX
• A) Replacement Grilles • B) Mounting Plate / Template • C) Speaker Harness
Not Shown: (10) Coarse Thread Screws, (10) M4 Socket Head Screws, (1) Roll 1/4" Foam Tape
TOOLS REQUIRED
• 5/64 Drill Bit
• 3/16 Allen Wrench
• 10mm Socket Wrench
• T-15 Torx
• T-30 Torx
• M3 Allen Key
• Phillips Bit
• Oscillating Saw or
other Cutting Device
TABLE OF CONTENTS
Soundbar Removal................................................2
Soundbar Disassembly...................................... 3-4
Cutting Guide .........................................................5
Speaker Installation...............................................6
Dome Light Installation......................................... 7
Replacement Grille Installation............................8
Mounting Specifications........................................9
Jeep Wrangler (JL) 2024-Up
Jeep Gladiator (JT) 2024-Up
Rear Soundbar Speaker Adapter Plates
Visit for more detailed information about the MetraOnline.com
product and up-to-date vehicle specific applications
B
C
386.257.1187
|
MetraOnline.com
2
SOUNDBAR REMOVAL
NOTE: It is highly recommended that the
soundbar be removed for install of this
speaker adapter kit. (Figure A)
1. Remove all panels along the top trim of
the interior of the vehicle to gain access
to the soundbar mounts.
2. Remove the (6) 10mm bolts that are
securing the soundbar in place.
3. Unplug the harness and remove the
soundbar from the vehicle.
Continue to Soundbar Disassembly
Figure A

Produkt Specifikationer

Mærke: Metra
Kategori: Højttaler
Model: JP-1019

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra JP-1019 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Metra Manualer

Metra

Metra JP-1020 Manual

3 April 2025
Metra

Metra JP-1019 Manual

13 Januar 2025
Metra

Metra BC-HDLFP Manual

11 September 2024
Metra

Metra JP-1018 Manual

11 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

T'nB

T'nB CFSPEAKERBT Manual

16 September 2025
T'nB

T'nB TWS Record V1 HPRECORD1BK Manual

16 September 2025
Ikea

Ikea SYMFONISK 404.872.97 Manual

16 September 2025
Ikea

Ikea SYMFONISK 605.065.77 Manual

16 September 2025
T'nB

T'nB Party Blaster HPPARTYBLAST Manual

16 September 2025
T'nB

T'nB HPCOLORPK Manual

16 September 2025
Ikea

Ikea SYMFONISK 104.873.07 Manual

16 September 2025
T'nB

T'nB HPCOLORBL Manual

16 September 2025
T'nB

T'nB Xplore TWS HPXPL2BKV2 Manual

15 September 2025
T'nB

T'nB Cube Blaster HPCUBEBLAST Manual

15 September 2025