Metra JP-1020 Manual

Metra Højttaler JP-1020

Læs gratis den danske manual til Metra JP-1020 (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Metra JP-1020, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 7/8/24 INSTJP-1020
INSTALLATION INSTRUCTIONS
JP-1020
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• Driver and passenger specific lower dash grilles
• Cut templates and hardware
• ABS injection molded, silver painted surround
• Metal stamped grille insert
• Use with OE or pair with JP-1014 speaker pods
• 1 Year warranty from defects
KIT COMPONENTS
• A) Template (left & right) • B) Cut-in grilles (left & right) • C) Backing plates (left & right) • D) Installation hardware
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
• 7mm & 8mm socket
• 2.5mm Allen key
• 1/4" Drill bit
• Utility knife
• Oscillating saw or
other cutting device
TABLE OF CONTENTS
Dash Disassembly .............................................. 2-3
Driver Side Disassembly ................................... 4
Passenger Side Disassembly ............................5
Cutting Instructions
Driver Side Cutting ........................................6-8
Passenger Side Cutting................................ 9-11
Jeep Wrangler (JL) 2024-Up
Jeep Gladiator (JT) 2024-Up
Lower Dash Speaker Grille Kit
Visit MetraOnline.com for more detailed information about the
product and up-to-date vehicle specific applications
A B
C D
386.257.1187
|
MetraOnline.com
2
Figure A: Remove (4) Phillips screws from the tray above the radio. Figure B: Remove the top trim piece with the panel tool.
1. Remove (4) Phillips screws from the
tray above the radio. (Figure A)
2. Remove top trim piece with the panel
tool. Disconnect harness if present.
(Figure B)
3. With the tray removed, remove the (2)
exposed Phillips screws. (Figure C)
4. With the top trim removed, remove the
(2) Phillips screws at the base of the
passenger A-pillar. (Figure D)
DASH DISASSEMBLY
Figure C: With the tray removed, remove the (2) exposed Phillips screws.
NOTE: The Dash Disassembly photos are
highlighted in yellow. Locations of screws to
be removed are approximate.
Figure D: With the top trim removed, remove the (2) Phillips screws at the
base of the passenger A-pillar.

Produkt Specifikationer

Mærke: Metra
Kategori: Højttaler
Model: JP-1020

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra JP-1020 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Metra Manualer

Metra

Metra JP-1020 Manual

3 April 2025
Metra

Metra JP-1019 Manual

13 Januar 2025
Metra

Metra BC-HDLFP Manual

11 September 2024
Metra

Metra JP-1018 Manual

11 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

T'nB

T'nB CFSPEAKERBT Manual

16 September 2025
T'nB

T'nB TWS Record V1 HPRECORD1BK Manual

16 September 2025
Ikea

Ikea SYMFONISK 404.872.97 Manual

16 September 2025
Ikea

Ikea SYMFONISK 605.065.77 Manual

16 September 2025
T'nB

T'nB Party Blaster HPPARTYBLAST Manual

16 September 2025
T'nB

T'nB HPCOLORPK Manual

16 September 2025
Ikea

Ikea SYMFONISK 104.873.07 Manual

16 September 2025
T'nB

T'nB HPCOLORBL Manual

16 September 2025
T'nB

T'nB Xplore TWS HPXPL2BKV2 Manual

15 September 2025
T'nB

T'nB Cube Blaster HPCUBEBLAST Manual

15 September 2025